18-04-2016, 10:08 AM
pdf of pneumatic paper cutting machine
SYNOPSIS
The paper cutting process is a main part of the all paper and printing industries. Normally the paper cutting machine is manually hand operated one for medium and small scale industries. In our project is “AUTOMATIC PNEUMATIC PAPER CUTTING MACHINE”.
Automation in the modern world is inevitable. Any automatic machine aimed at the economical use of man, machine, and material worth the most. In our project is solenoid valve and control timing unit is used for automation.
The paper cutting machine works with the help of pneumatic double acting cylinder. The piston is connected to the moving cutting tool. It is also used to cut the small size of sheet metal. The machine is portable in size, so easy transportable.
INTRODUCTION
This is an era of automation where it is broadly defined as replacement of manual effort by mechanical power in all degrees of automation. The operation remains an essential part of the system although with changing demands on physical input as the degree of mechanization is increased.
Degrees of automation are of two types, viz.
Full automation.
Semi automation.
In semi automation a combination of manual effort and mechanical power is required whereas in full automation human participation is very negligible.
Need For Automation
Automation can be achieved through computers, hydraulics, pneumatics, robotics, etc., of these sources, pneumatics form an attractive medium for low cost automation. The main advantages of all pneumatic systems are economy and simplicity. Automation plays an important role in mass production.
Reduction of lab our and material cost
Reduction of overall cost
Increased production
Increased storage capacity
Increased safety
Reduction in fatigue
Improved personnel comfort
WORKING PRINCIPLE
The compressed air from the compressor is used as the force medium for this operation. There are pneumatic double acting cylinders, solenoid valve; flow control valve and timer unit used .The arm from the compressor enters to the floe control Valve. The controlled air from the flow control valve enters to the solenoid valve. The function of solenoid valves all of air correct time interval. The 5/2 solenoid valve is used. In one position air enter to the cylinder and pusses the piston, so that the cutting stroke is obtained.
The next position air enters to the other side of cylinder and pusses the piston return back, so that the releasing stroke is obtained. The speed of the cutting and releasing stroke is varied by the timer control unit circuit.
APPLICATIONS
This machine is very useful for small and medium scale industries
This machine is used to cut the paper and small thickness of sheet
All Industrial Application
DISADVANTAGES
While working, the compressed air produces noise therefore a silencer may be used.
High torque can not be obtained
Load carrying capacity of this unit is not very high.(<50 N)
ADVANTAGES
The pneumatic is more efficient in the technical field
Quick response is achieved
Simple in construction
Easy to maintain and repair
Cost of the unit is less when compared to other machine
No fire hazard problem due to over loading
Comparatively the operation cost is less
The operation of cutting is faster because the medium used to operate is air
Continuous operation is possible without stopping
SYNOPSIS
The paper cutting process is a main part of the all paper and printing industries. Normally the paper cutting machine is manually hand operated one for medium and small scale industries. In our project is “AUTOMATIC PNEUMATIC PAPER CUTTING MACHINE”.
Automation in the modern world is inevitable. Any automatic machine aimed at the economical use of man, machine, and material worth the most. In our project is solenoid valve and control timing unit is used for automation.
The paper cutting machine works with the help of pneumatic double acting cylinder. The piston is connected to the moving cutting tool. It is also used to cut the small size of sheet metal. The machine is portable in size, so easy transportable.
INTRODUCTION
This is an era of automation where it is broadly defined as replacement of manual effort by mechanical power in all degrees of automation. The operation remains an essential part of the system although with changing demands on physical input as the degree of mechanization is increased.
Degrees of automation are of two types, viz.
Full automation.
Semi automation.
In semi automation a combination of manual effort and mechanical power is required whereas in full automation human participation is very negligible.
Need For Automation
Automation can be achieved through computers, hydraulics, pneumatics, robotics, etc., of these sources, pneumatics form an attractive medium for low cost automation. The main advantages of all pneumatic systems are economy and simplicity. Automation plays an important role in mass production.
Reduction of lab our and material cost
Reduction of overall cost
Increased production
Increased storage capacity
Increased safety
Reduction in fatigue
Improved personnel comfort
WORKING PRINCIPLE
The compressed air from the compressor is used as the force medium for this operation. There are pneumatic double acting cylinders, solenoid valve; flow control valve and timer unit used .The arm from the compressor enters to the floe control Valve. The controlled air from the flow control valve enters to the solenoid valve. The function of solenoid valves all of air correct time interval. The 5/2 solenoid valve is used. In one position air enter to the cylinder and pusses the piston, so that the cutting stroke is obtained.
The next position air enters to the other side of cylinder and pusses the piston return back, so that the releasing stroke is obtained. The speed of the cutting and releasing stroke is varied by the timer control unit circuit.
APPLICATIONS
This machine is very useful for small and medium scale industries
This machine is used to cut the paper and small thickness of sheet
All Industrial Application
DISADVANTAGES
While working, the compressed air produces noise therefore a silencer may be used.
High torque can not be obtained
Load carrying capacity of this unit is not very high.(<50 N)
ADVANTAGES
The pneumatic is more efficient in the technical field
Quick response is achieved
Simple in construction
Easy to maintain and repair
Cost of the unit is less when compared to other machine
No fire hazard problem due to over loading
Comparatively the operation cost is less
The operation of cutting is faster because the medium used to operate is air
Continuous operation is possible without stopping
