07-03-2012, 04:49 PM
UNDER WATER COMMUNICATION
[attachment=18091]
FEATURES
Advanced Digital Signal Processing results in a large number of selectable functions and frequencies with superior voice quality.
AN/UQC compatible default settings: In default mode, the system is compatible with AN/UQC series systems (carrier frequency 8.087 kHz, USB, 200 watt output power). TIPE default frequencies are also selected.
TIPE (Transponder, Interrogator and Pinger/Echo Sounder) Modes provide automatic ranging, tracking pinger, and when used with a vertically oriented transducer, depth below the surface or altitude above the bottom. It also operates on operator selected frequencies between 5 - 45* kHz.
AN/WQC Mode: In WQC Mode the system can communicate with the AN/WQC system and provide automatic ranging against an ARD-8000.
If used with an external power amplifier, the system is capable of the same output acoustic source levels as the AN/WQC.
OPERATOR INTERFACE
All operator controls are located on the front panel. The front panel has adjustable backlighting, except for Power On/Off, speaker Volume, Squelch and TIPE Transmission Rate, all system operator controls are membrane switches. Frequently used functions have dedicated controls, while less frequently used functions are selected by numeric code entries on the keypad. This makes operation simple while allowing flexibility and a virtually unlimited number of functions. Functions selected and parameter values are displayed on red LEDs. The frequency and Range displays are also used for display of warning messages and for results of initiated tests.
VOICE & CW COMMUNICATION
Voice and Continuous Wave (CW) communication is the Model 5400 UWT’s primary application. Communication can be established between any two points (surface ships, submarines, fixed installations, or any combination of these) in the same body of water at ranges to 20,000 yards. Operating frequencies are selectable.
Broad frequency range, adjustable output power, and selectable USB/LSB modulation, allows the Model 5400 UWT to provide discrete communication when multiple telephones are used in the same operating area as well as communication with diver carried underwater telephones.
TELEMETRY
The Model 5400 UWT’s transceiver and transducer(s) can be used to transmit and receive data from peripheral equipment via a connector located on the telephone’s back panel.
Typical applications are interrogation of coded transponders, and Identification Friend or Foe (IFF).
Frequency coverage is 5 to 45* kHz in 1 Hz increments.
[attachment=18091]
FEATURES
Advanced Digital Signal Processing results in a large number of selectable functions and frequencies with superior voice quality.
AN/UQC compatible default settings: In default mode, the system is compatible with AN/UQC series systems (carrier frequency 8.087 kHz, USB, 200 watt output power). TIPE default frequencies are also selected.
TIPE (Transponder, Interrogator and Pinger/Echo Sounder) Modes provide automatic ranging, tracking pinger, and when used with a vertically oriented transducer, depth below the surface or altitude above the bottom. It also operates on operator selected frequencies between 5 - 45* kHz.
AN/WQC Mode: In WQC Mode the system can communicate with the AN/WQC system and provide automatic ranging against an ARD-8000.
If used with an external power amplifier, the system is capable of the same output acoustic source levels as the AN/WQC.
OPERATOR INTERFACE
All operator controls are located on the front panel. The front panel has adjustable backlighting, except for Power On/Off, speaker Volume, Squelch and TIPE Transmission Rate, all system operator controls are membrane switches. Frequently used functions have dedicated controls, while less frequently used functions are selected by numeric code entries on the keypad. This makes operation simple while allowing flexibility and a virtually unlimited number of functions. Functions selected and parameter values are displayed on red LEDs. The frequency and Range displays are also used for display of warning messages and for results of initiated tests.
VOICE & CW COMMUNICATION
Voice and Continuous Wave (CW) communication is the Model 5400 UWT’s primary application. Communication can be established between any two points (surface ships, submarines, fixed installations, or any combination of these) in the same body of water at ranges to 20,000 yards. Operating frequencies are selectable.
Broad frequency range, adjustable output power, and selectable USB/LSB modulation, allows the Model 5400 UWT to provide discrete communication when multiple telephones are used in the same operating area as well as communication with diver carried underwater telephones.
TELEMETRY
The Model 5400 UWT’s transceiver and transducer(s) can be used to transmit and receive data from peripheral equipment via a connector located on the telephone’s back panel.
Typical applications are interrogation of coded transponders, and Identification Friend or Foe (IFF).
Frequency coverage is 5 to 45* kHz in 1 Hz increments.
