18-03-2011, 02:48 PM
presented by:
SUBASH.J
SHARATH KUMAR.K.S
[attachment=10501]
INTRODUCTION:
4G stands for the fourth generation of cellular wireless standards. It is a successor to 3G and 2G families of standards. Speed requirements for 4G service set the peak download speed at 100 Mbit/s for high mobility communication (such as from trains and cars) and 1 Gbit/s for low mobility communication (such as pedestrians and stationary users)
A 4G system is expected to provide a comprehensive and secure all-IP based mobile broadband solution to smartphones, laptop computer wireless modems and other mobile devices. Facilities such as ultra-broadband Internet access, IP telephony, gaming services, and streamed multimedia may be provided to users.
Pre-4G technologies such as mobile WiMAX and first-release 3G Long term evolution (LTE) have been on the market since 2006 and 2009 respectively, and are often branded as 4G. The current versions of these technologies did not fulfill the original ITU-R requirements of data rates approximately up to 1 Gbit/s for 4G systems. Marketing materials use 4G as a description for Mobile-WiMAX and LTE in their current forms.
IMT-Advanced compliant versions of the above two standards are under development and called “LTE Advanced” and “WirelessMAN-Advanced” respectively. ITU has decided that “LTE Advanced” and “WirelessMAN-Advanced” should be accorded the official designation of IMT-Advanced. On December 6, 2010, ITU announced that current versions of LTE, WiMax and other evolved 3G technologies that do not fulfill "IMT-Advanced" requirements could be considered "4G", provided they represent forerunners to IMT-Advanced and "a substantial level of improvement in performance and capabilities with respect to the initial third generation systems now deployed."
In all suggestions for 4G, the CDMA spread spectrum radio technology used in 3G systems and IS-95 is abandoned and replaced by OFDMA and other frequency-domain equalization schemes. This is combined with MIMO (Multiple In Multiple Out), e.g., multiple antennas, dynamic channel allocation and channel-dependent scheduling.
BACKGROUND:
The nomenclature of the generations generally refers to a change in the fundamental nature of the service, non-backwards compatible transmission technology, and new frequency bands. New generations have appeared about every ten years since the first move from 1981 analog (1G) to digital (2G) transmission in 1992. This was followed, in 2001, by 3G multi-media support, spread spectrum transmission and at least 200 kbit/s, in 2011 expected to be followed by 4G, which refers to all-IP packet-switched networks, mobile ultra-broadband (gigabit speed) access and multi-carrier transmission.
The fastest 3G based standard in the WCDMA family is the HSPA+ standard, which was commercially available in 2009 and offers 28 Mbit/s downstreams without MIMO, i.e. only with one antenna (it would offer 56 Mbit/s with 2x2 MIMO), and 22 Mbit/s upstreams. The fastest 3G based standard in the CDMA2000 family is the EV-DO Rev. B, which was available in 2010 and offers 15.67 Mbit/s downstreams.
In mid 1990s, the ITU-R organization specified the IMT-2000 specifications for what standards that should be considered 3G systems. However, the cell phone market only brands some of the IMT-2000 standards as 3G (e.g. WCDMA and CDMA2000), but not all (3GPP EDGE, DECT and mobile-WiMAX all fulfil the IMT-2000 requirements and are formally accepted as 3G standards, but are typically not branded as 3G). In 2008, ITU-R specified the IMT-Advanced (International Mobile Telecommunications Advanced) requirements for 4G systems.
ITU REQUIREMENTS AND 4G WIRELESS STANDARDS:
This article uses 4G to refer to IMT-Advanced (International Mobile Telecommunications Advanced), as defined by ITU-R. An IMT-Advanced cellular system must fulfil the following requirements:
• Based on an all-IP packet switched network.
• Peak data rates of up to approximately 100 Mbit/s for high mobility such as mobile access and up to approximately 1 Gbit/s for low mobility such as nomadic/local wireless access, according to the ITU requirements.
• Dynamically share and utilize the network resources to support more simultaneous users per cell.
• Scalable channel bandwidth, between 5 and 20 MHz, optionally up to 40 MHz.
• Peak page link spectral efficiency of 15 bit/s/Hz in the downlink, and 6.75 bit/s/Hz in the uplink (meaning that 1 Gbit/s in the downlink should be possible over less than 67 MHz bandwidth)
• System spectral efficiency of up to 3 bit/s/Hz/cell in the downlink and 2.25 bit/s/Hz/cell for indoor usage
• Smooth handovers across heterogeneous networks.
• Ability to offer high quality of service for next generation multimedia support.
SUBASH.J
SHARATH KUMAR.K.S
[attachment=10501]
INTRODUCTION:
4G stands for the fourth generation of cellular wireless standards. It is a successor to 3G and 2G families of standards. Speed requirements for 4G service set the peak download speed at 100 Mbit/s for high mobility communication (such as from trains and cars) and 1 Gbit/s for low mobility communication (such as pedestrians and stationary users)
A 4G system is expected to provide a comprehensive and secure all-IP based mobile broadband solution to smartphones, laptop computer wireless modems and other mobile devices. Facilities such as ultra-broadband Internet access, IP telephony, gaming services, and streamed multimedia may be provided to users.
Pre-4G technologies such as mobile WiMAX and first-release 3G Long term evolution (LTE) have been on the market since 2006 and 2009 respectively, and are often branded as 4G. The current versions of these technologies did not fulfill the original ITU-R requirements of data rates approximately up to 1 Gbit/s for 4G systems. Marketing materials use 4G as a description for Mobile-WiMAX and LTE in their current forms.
IMT-Advanced compliant versions of the above two standards are under development and called “LTE Advanced” and “WirelessMAN-Advanced” respectively. ITU has decided that “LTE Advanced” and “WirelessMAN-Advanced” should be accorded the official designation of IMT-Advanced. On December 6, 2010, ITU announced that current versions of LTE, WiMax and other evolved 3G technologies that do not fulfill "IMT-Advanced" requirements could be considered "4G", provided they represent forerunners to IMT-Advanced and "a substantial level of improvement in performance and capabilities with respect to the initial third generation systems now deployed."
In all suggestions for 4G, the CDMA spread spectrum radio technology used in 3G systems and IS-95 is abandoned and replaced by OFDMA and other frequency-domain equalization schemes. This is combined with MIMO (Multiple In Multiple Out), e.g., multiple antennas, dynamic channel allocation and channel-dependent scheduling.
BACKGROUND:
The nomenclature of the generations generally refers to a change in the fundamental nature of the service, non-backwards compatible transmission technology, and new frequency bands. New generations have appeared about every ten years since the first move from 1981 analog (1G) to digital (2G) transmission in 1992. This was followed, in 2001, by 3G multi-media support, spread spectrum transmission and at least 200 kbit/s, in 2011 expected to be followed by 4G, which refers to all-IP packet-switched networks, mobile ultra-broadband (gigabit speed) access and multi-carrier transmission.
The fastest 3G based standard in the WCDMA family is the HSPA+ standard, which was commercially available in 2009 and offers 28 Mbit/s downstreams without MIMO, i.e. only with one antenna (it would offer 56 Mbit/s with 2x2 MIMO), and 22 Mbit/s upstreams. The fastest 3G based standard in the CDMA2000 family is the EV-DO Rev. B, which was available in 2010 and offers 15.67 Mbit/s downstreams.
In mid 1990s, the ITU-R organization specified the IMT-2000 specifications for what standards that should be considered 3G systems. However, the cell phone market only brands some of the IMT-2000 standards as 3G (e.g. WCDMA and CDMA2000), but not all (3GPP EDGE, DECT and mobile-WiMAX all fulfil the IMT-2000 requirements and are formally accepted as 3G standards, but are typically not branded as 3G). In 2008, ITU-R specified the IMT-Advanced (International Mobile Telecommunications Advanced) requirements for 4G systems.
ITU REQUIREMENTS AND 4G WIRELESS STANDARDS:
This article uses 4G to refer to IMT-Advanced (International Mobile Telecommunications Advanced), as defined by ITU-R. An IMT-Advanced cellular system must fulfil the following requirements:
• Based on an all-IP packet switched network.
• Peak data rates of up to approximately 100 Mbit/s for high mobility such as mobile access and up to approximately 1 Gbit/s for low mobility such as nomadic/local wireless access, according to the ITU requirements.
• Dynamically share and utilize the network resources to support more simultaneous users per cell.
• Scalable channel bandwidth, between 5 and 20 MHz, optionally up to 40 MHz.
• Peak page link spectral efficiency of 15 bit/s/Hz in the downlink, and 6.75 bit/s/Hz in the uplink (meaning that 1 Gbit/s in the downlink should be possible over less than 67 MHz bandwidth)
• System spectral efficiency of up to 3 bit/s/Hz/cell in the downlink and 2.25 bit/s/Hz/cell for indoor usage
• Smooth handovers across heterogeneous networks.
• Ability to offer high quality of service for next generation multimedia support.
