27-08-2009, 01:55 PM
[attachment=61]
[attachment=62]
[attachment=63]
Thermoelectric cooling uses the Peltier effect to create a heat flux between the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other side against the temperature gradient (from cold to hot), with consumption of electrical energy. Such an instrument is also called a Peltier device, Peltier diode, cooling diode, Peltier heat pump, solid state refrigerator, or thermoelectric cooler (TEC).Because heating can be achieved more easily and economically by many other methods, Peltier devices are mostly used for cooling. However, when a single device is to be used for both heating and cooling, a Peltier device may be desirable. Simply connecting it to a DC voltage will cause one side to cool, while the other side warms. The effectiveness of the pump at moving the heat away from the cold side is totally dependent upon the amount of current provided and how well the heat from the hot side can be removed.
Peltier devices can also be used to generate electricity (thermogenerator) if a temperature difference is maintained between the two sides.
read more from http://en.wikipediawiki/Thermoelectric_cooling
[attachment=62]
[attachment=63]
Thermoelectric cooling uses the Peltier effect to create a heat flux between the junction of two different types of materials. A Peltier cooler, heater, or thermoelectric heat pump is a solid-state active heat pump which transfers heat from one side of the device to the other side against the temperature gradient (from cold to hot), with consumption of electrical energy. Such an instrument is also called a Peltier device, Peltier diode, cooling diode, Peltier heat pump, solid state refrigerator, or thermoelectric cooler (TEC).Because heating can be achieved more easily and economically by many other methods, Peltier devices are mostly used for cooling. However, when a single device is to be used for both heating and cooling, a Peltier device may be desirable. Simply connecting it to a DC voltage will cause one side to cool, while the other side warms. The effectiveness of the pump at moving the heat away from the cold side is totally dependent upon the amount of current provided and how well the heat from the hot side can be removed.
Peltier devices can also be used to generate electricity (thermogenerator) if a temperature difference is maintained between the two sides.
read more from http://en.wikipediawiki/Thermoelectric_cooling
