17-02-2011, 12:24 PM
[attachment=8734]
SCADA FOR TELEPHONE EXCHANGE WITH BLUETOOTH INTERFACE
This project is designed to form bridge between rural exchanges and district telecom and to statewide telecom. By implementing this idea in a telephone exchange will improve the quality of work.
We have considered many factors in this project starting from coaxial cable to optical fiber cable along with security and safe operation of the exchange, without any human interference.
By implementing our idea, the user can identify the cable failure (conductor), OFC (Optical Fiber Cable) failure, fire hazardous, human interruption, RDX bomb detection, air conditioner failure, generator and UPS monitoring. All the above plays a vital role in almost all the exchanges irrespective of the size.
We would like to provide embedded solution for the above. A perfectly crafted 16F877A controller will be used to make further perfection of processing.
All the above mentioned events will be demonstrated lively. This is not a simulation; this could be the real application model.
Status of the one exchange will be connected to the main exchange using SCADA software. This software allows to propagating the exchange related parameters to web. If incase of any communication failure, can be identified automatically.
Both the transmitting person and receivers can identify the transmission failure.
Parameters and Events taken into consideration
1. OFC failure
2. Coaxial cable failure
3. RDX bomb detection
4. Intruder sensing
5. UPS voltage monitoring
6. Major rectifier bank monitoring
7. Floor temperature monitoring
8. Changed number announcement
9. No tapping
10. Auto fire put off
11. Stand by air conditioner ON
12. Flame detection
13. Multimedia for all
14. Staff attendance
All the above events can be made into graphical form can be recorded without disturbing the acquiring. This could be a single chip solution for SCADA telephone exchange.
This project consists of self-sufficient sensors and transducers supported with embedded controllers.
SCADA FOR TELEPHONE EXCHANGE WITH BLUETOOTH INTERFACE
This project is designed to form bridge between rural exchanges and district telecom and to statewide telecom. By implementing this idea in a telephone exchange will improve the quality of work.
We have considered many factors in this project starting from coaxial cable to optical fiber cable along with security and safe operation of the exchange, without any human interference.
By implementing our idea, the user can identify the cable failure (conductor), OFC (Optical Fiber Cable) failure, fire hazardous, human interruption, RDX bomb detection, air conditioner failure, generator and UPS monitoring. All the above plays a vital role in almost all the exchanges irrespective of the size.
We would like to provide embedded solution for the above. A perfectly crafted 16F877A controller will be used to make further perfection of processing.
All the above mentioned events will be demonstrated lively. This is not a simulation; this could be the real application model.
Status of the one exchange will be connected to the main exchange using SCADA software. This software allows to propagating the exchange related parameters to web. If incase of any communication failure, can be identified automatically.
Both the transmitting person and receivers can identify the transmission failure.
Parameters and Events taken into consideration
1. OFC failure
2. Coaxial cable failure
3. RDX bomb detection
4. Intruder sensing
5. UPS voltage monitoring
6. Major rectifier bank monitoring
7. Floor temperature monitoring
8. Changed number announcement
9. No tapping
10. Auto fire put off
11. Stand by air conditioner ON
12. Flame detection
13. Multimedia for all
14. Staff attendance
All the above events can be made into graphical form can be recorded without disturbing the acquiring. This could be a single chip solution for SCADA telephone exchange.
This project consists of self-sufficient sensors and transducers supported with embedded controllers.
