10-05-2016, 11:04 AM
In satellite communication, signal transferring between the sender and receiver is done with the help of satellite. In this process, the signal which is basically a beam of modulated microwaves is sent towards the satellite. Then the satellite amplifies the signal and sent it back to the receiver’s antenna present on the earth’s surface. So, all the signal transferring is happening in space. Thus this type of communication is known as space communication.
Two satellites which are commonly used in satellite communication are Active and passive satellites.
Passive satellites: It is just a plastic balloon having a metal coated over it. This sphere reflects the coming microwave signals coming from one part of the earth to other part. This is also known as passive sphere. Our earth also has a passive satellite i.e. moon.
Active satellites: It basically does the work of amplifying the microwave signals coming. In active satellites an antenna system, transmitter, power supply and a receiver is used. These satellites are also called as transponders. The transmitters fitted on the earth generate the microwaves. These rays are received by the transponders attached to the satellite. Then after amplifying, these signals are transmitted back to earth. This sending can be done at the same time or after some delay. These amplified signals are stored in the memory of the satellites, when earth properly faces the satellite. Then the satellite starts sending the signals to earth. Some active satellites also have programming and recording features. Then these recording can be easily played and watched. The first active satellite was launched by Russia in 1957. The signals coming from the satellite when reach the earth, are of very low intensity. Their amplification is done by the receivers themselves. After amplification these become available for further use.
Two satellites which are commonly used in satellite communication are Active and passive satellites.
Passive satellites: It is just a plastic balloon having a metal coated over it. This sphere reflects the coming microwave signals coming from one part of the earth to other part. This is also known as passive sphere. Our earth also has a passive satellite i.e. moon.
Active satellites: It basically does the work of amplifying the microwave signals coming. In active satellites an antenna system, transmitter, power supply and a receiver is used. These satellites are also called as transponders. The transmitters fitted on the earth generate the microwaves. These rays are received by the transponders attached to the satellite. Then after amplifying, these signals are transmitted back to earth. This sending can be done at the same time or after some delay. These amplified signals are stored in the memory of the satellites, when earth properly faces the satellite. Then the satellite starts sending the signals to earth. Some active satellites also have programming and recording features. Then these recording can be easily played and watched. The first active satellite was launched by Russia in 1957. The signals coming from the satellite when reach the earth, are of very low intensity. Their amplification is done by the receivers themselves. After amplification these become available for further use.
