21-02-2010, 01:09 PM
[attachment=2393]
SOLAR POWER SATELLITE
solar power satellite
INTRODUCTION
The new millennium has introduced increased pressure for finding new renewable energy sources
Building a power station in space to transmit electricity to Earth by way of radio waves-the Solar Power Satellites.
Microwave Wireless Power Transmission
SPS is a clean, large-scale, stable electric power source
WHY SPS
Increasing global energy demand
Limitation of renewable energy sources
Environmental problems due to fossil fuels.
Overcome day & night effect and other factors such as clouds.
Overcome energy crisis.
SPS“ THE BACKGROUND
Peter Glaser invented the concept of a large SPS.
The U.S Department of Energy (DOE) and the
National Aeronautics and Space Administration
(NASA) examined the SPS concept extensively
during the late 1970s.
Fresh look Study, SSP Concept Definition Study.
SSP Exploratory and Research Technology
SPS- A GENERAL IDEA
It is located in the geosynchronous orbit.
Comparison between ordinary satellite.
Its operation.
About structure.
Comparison between terrestrial station
WIRELESS POWER TRANSMISSION
The 50Hz ac power tapped from grid line is stepped down to suitable voltage level for rectification in to dc.
The it is supplied to oscillator fed magnetron.
Magnetron consist of electrons supplied by cathode which are collected by positively charged anode.
The electrons are forced to move in a circular path by a high power permanent magnet.
Electromagnetic radiation in microwave range is generated
MICROWAVE TRANSMISSION IN SPS
The conversion of direct power to microwave power
The formation and control of microwave beam
The collection of the microwave energy and its conversion into electrical energy at the earthâ„¢s surface.
The key microwave components in a WPT system are the transmitter, beam control and the receiving antenna called RECTENNA
TRANSMITTER
The key requirement of a transmitter is its ability to convert dc power to RF power efficiently and radiate the power to a controlled manner with low loss.
The transmitterâ„¢s efficiency drives the end-to-end efficiency as well as thermal management system.
The main components of a transmitter include dc-to-RF converter and transmitting antenna.
The main dc-RF converter s are klystrons
KLYSRON TRASMITTER
The tube body and solenoid operate at 300°C and the collector operates at 500°C.
The overall efficiency is 83%.
The microwave power density at the transmitting array will be 1 kW/m² for a typical 1 GW SPS with a transmitting antenna aperture of 1 km diameter.
If we use 2.45 GHz for MPT, the number of antenna elements per square meter is on the order of 100.
BEAM CONTROL
A key system and safety aspect of WPT in its ability to control the power beam.
Retro directive beam control systems have been the preferred method of achieving accurate beam pointing.
A coded pilot signal is emitted from the rectenna towards the SPS transmitter to provide a phase reference for forming and pointing the power beams
RECTENNA
RECTENNA is the microwave to dc converting device .
It is mainly composed of a receiving antenna and a rectifying circuit.
Fig. shows schematic of RECTENNA. It consists of a receiving antenna, an input low pass filter, a rectifying circuit and an output smoothing filter.
In RECTENNA arrays, the diode is the most critical component to achieve higher efficiencies because it is the main source of loss.
Diode cut off frequency is given by Æ’=1/ [2pRsCj], where Æ’ is the cut off frequency, Rs is the diode series resistance, Cj is the zero-bias junction capacitance.
ADVANTAGES
The power could be directed to any point on the earthâ„¢s surface.
The power density would be uninterrupted by darkness, clouds, or precipitation, which are the problems encountered with earth based solar arrays.
The realization of the SPS concept holds great promises for solving energy crisis
No moving parts.
No fuel required.
No waste product.
DISADVANTAGES
The main draw back of solar energy transfer from orbit is the storage of electricity during off peak demand hours.
The frequency of beamed radiation is planned to be at 2.45 GHz and this frequency is used by communication satellites also.
The entire structure is massive.
High cost and require much time for construction.
Radiation hazards associated with the system.
Risks involved with malfunction.
High power microwave source and high gain antenna can be used to deliver an intense burst of energy to a target and thus used as a weapon
CONCLUSION
The SPS will be a central attraction of space and energy technology in coming decades. However, large scale retro directive power transmission has not yet been proven and needs further development. Another important area of technological development will be the reduction of the size and weight of individual elements in the space section of SPS. Large-scale transportation and robotics for the construction of large-scale structures in space include the other major fields of technologies requiring further developments. Technical hurdles will be removed in the coming one or two decades. Finally, we look forward to universal acceptance of the premise the electromagnetic energy is a tool to improve the quality of life for mankind. It is not a pollutant but more aptly, a man made extension of the naturally generated electromagnetic spectrum that provides heat and light for our sustenance. From this view point, the SPS is merely a down frequency converter from the visible spectrum to microwaves.
SOLAR POWER SATELLITE
solar power satellite
INTRODUCTION
The new millennium has introduced increased pressure for finding new renewable energy sources
Building a power station in space to transmit electricity to Earth by way of radio waves-the Solar Power Satellites.
Microwave Wireless Power Transmission
SPS is a clean, large-scale, stable electric power source
WHY SPS
Increasing global energy demand
Limitation of renewable energy sources
Environmental problems due to fossil fuels.
Overcome day & night effect and other factors such as clouds.
Overcome energy crisis.
SPS“ THE BACKGROUND
Peter Glaser invented the concept of a large SPS.
The U.S Department of Energy (DOE) and the
National Aeronautics and Space Administration
(NASA) examined the SPS concept extensively
during the late 1970s.
Fresh look Study, SSP Concept Definition Study.
SSP Exploratory and Research Technology
SPS- A GENERAL IDEA
It is located in the geosynchronous orbit.
Comparison between ordinary satellite.
Its operation.
About structure.
Comparison between terrestrial station
WIRELESS POWER TRANSMISSION
The 50Hz ac power tapped from grid line is stepped down to suitable voltage level for rectification in to dc.
The it is supplied to oscillator fed magnetron.
Magnetron consist of electrons supplied by cathode which are collected by positively charged anode.
The electrons are forced to move in a circular path by a high power permanent magnet.
Electromagnetic radiation in microwave range is generated
MICROWAVE TRANSMISSION IN SPS
The conversion of direct power to microwave power
The formation and control of microwave beam
The collection of the microwave energy and its conversion into electrical energy at the earthâ„¢s surface.
The key microwave components in a WPT system are the transmitter, beam control and the receiving antenna called RECTENNA
TRANSMITTER
The key requirement of a transmitter is its ability to convert dc power to RF power efficiently and radiate the power to a controlled manner with low loss.
The transmitterâ„¢s efficiency drives the end-to-end efficiency as well as thermal management system.
The main components of a transmitter include dc-to-RF converter and transmitting antenna.
The main dc-RF converter s are klystrons
KLYSRON TRASMITTER
The tube body and solenoid operate at 300°C and the collector operates at 500°C.
The overall efficiency is 83%.
The microwave power density at the transmitting array will be 1 kW/m² for a typical 1 GW SPS with a transmitting antenna aperture of 1 km diameter.
If we use 2.45 GHz for MPT, the number of antenna elements per square meter is on the order of 100.
BEAM CONTROL
A key system and safety aspect of WPT in its ability to control the power beam.
Retro directive beam control systems have been the preferred method of achieving accurate beam pointing.
A coded pilot signal is emitted from the rectenna towards the SPS transmitter to provide a phase reference for forming and pointing the power beams
RECTENNA
RECTENNA is the microwave to dc converting device .
It is mainly composed of a receiving antenna and a rectifying circuit.
Fig. shows schematic of RECTENNA. It consists of a receiving antenna, an input low pass filter, a rectifying circuit and an output smoothing filter.
In RECTENNA arrays, the diode is the most critical component to achieve higher efficiencies because it is the main source of loss.
Diode cut off frequency is given by Æ’=1/ [2pRsCj], where Æ’ is the cut off frequency, Rs is the diode series resistance, Cj is the zero-bias junction capacitance.
ADVANTAGES
The power could be directed to any point on the earthâ„¢s surface.
The power density would be uninterrupted by darkness, clouds, or precipitation, which are the problems encountered with earth based solar arrays.
The realization of the SPS concept holds great promises for solving energy crisis
No moving parts.
No fuel required.
No waste product.
DISADVANTAGES
The main draw back of solar energy transfer from orbit is the storage of electricity during off peak demand hours.
The frequency of beamed radiation is planned to be at 2.45 GHz and this frequency is used by communication satellites also.
The entire structure is massive.
High cost and require much time for construction.
Radiation hazards associated with the system.
Risks involved with malfunction.
High power microwave source and high gain antenna can be used to deliver an intense burst of energy to a target and thus used as a weapon
CONCLUSION
The SPS will be a central attraction of space and energy technology in coming decades. However, large scale retro directive power transmission has not yet been proven and needs further development. Another important area of technological development will be the reduction of the size and weight of individual elements in the space section of SPS. Large-scale transportation and robotics for the construction of large-scale structures in space include the other major fields of technologies requiring further developments. Technical hurdles will be removed in the coming one or two decades. Finally, we look forward to universal acceptance of the premise the electromagnetic energy is a tool to improve the quality of life for mankind. It is not a pollutant but more aptly, a man made extension of the naturally generated electromagnetic spectrum that provides heat and light for our sustenance. From this view point, the SPS is merely a down frequency converter from the visible spectrum to microwaves.
