Posts: 3,561
Threads: 923
Joined: Sep 2010
Introduction :
Green house is a laboratory where research is conducted on crop behavior at different, simulated environmental conditions.
Micrologic developed a PC-based system for monitoring, control and data logging of environmental parameters like temperature, humidity, and light intensity without human intervention.
Highlights :
Design, Manufacture, Test and Supply of PC-based Control System to control environmental parameters in a greenhouse.
Control and Data acquisition of various parameters like temperature, humidity, light intensity…
PC based system, scalable and flexible
Acquires, logs data onto the PC, and provides analysis and presentation of data.
Reference:
http://micrologicindiaservices_green_hou...ation.html
Offers provisions for future expansion.
Posts: 5
Threads: 3
Joined: Feb 2010
kesh.snehitha[at]gmail.com
Posts: 5,362
Threads: 2,998
Joined: Feb 2011
[attachment=11256]
GREEN HOUSE AUTOMATION
AIM:
The main aim of the project is to develop a green house effect concept using microcontroller.
PROJECT DESCRIPTION:
This project is designed to create an artificial green house environment for corporate farming. Use of embedded technology makes this closed loop feedback control system efficient and reliable. The sensed and set temperature values are simultaneously displayed on the LCD. The circuit is programmed for ON/ OFF control of water sprinklers in the field.
The temperature sensor LM35 senses the temperature according to the requirement and converts it into an electrical signal, which is applied to the micro controller through ADC. The analog signal is converted into digital format by the analog-to-digital converter (ADC). The sensed and set values of the temperature are displayed on the 16x2 LCD. And the cooling process can be arranged according to our requirement by using water sprinklers which will be connected through a relay.
This type of farming using embedded systems is used in the fields where less time is required for getting huge crop.
MICROCONTROLLER DESCRIPTION:
The AT89C52 is a low-power, high-performance CMOS 8-bit microcomputer with 8Kbytes of Flash programmable and erasable read only memory (PEROM). The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C52 is a powerful microcomputer, which provides a highly flexible and cost-effective solution to many embedded control applications.
FEATURES:
a. 8K Bytes of In-System Reprogrammable Flash Memory
b. Endurance: 1,000 Write/Erase Cycles
c. Fully Static Operation: 0 Hz to 24 MHz
d. 256 x 8-bit Internal RAM
e. 32 Programmable I/O Lines
f. Three 16-bit Timer/Counters
g. Eight Interrupt Sources
h. Programmable Serial Channel
i. Low-power Idle and Power-down Modes
APPLICATIONS:
a. Corporate farming
HARDWARE & SOFTWARE REQUIRED:
a. KEIL COMPILER
b. AT89C51 MICRO CONTROLLER
c. 12V/1AMP TRANSFORMER
d. TOPWIN PROGRAMMER
e. LCD
f. LM 35
g. ADC
Posts: 2
Threads: 0
Joined: Sep 2011
plzzzzzzzzzzz send project full report...
Posts: 6,566
Threads: 1,107
Joined: Jul 2011
To get more information about the topic "GreenHouse Automation " please refer the page link below
http://studentbank.in/report-greenhouse-automation