working of knock vibration activated alarm
#1

Detailed explanation on the working of a earthquake detector alarm with help of a circuit diagram.
Reply
#2
KNOCK/VIBERATION ACTIVATED ALARM



This inexpensive project can be used as knock / vibration activated burglar alarm. Piezo electric sensor plate can be fixed on table, door, cupboard, window etc… using cello tape or adhesive.
When an intruder knocks on them, piezo electric sensor converts mechanical vibrations into electrical vibration.
Electrical pulses are undergone amplification by transistor amplifier stages. Final transistor drives a piezo buzzer.
Time delay can be changed by adjusting value of capacitor connected across 220k resistors. TO activate AC loads buzzer may be replaced with a relay. Load to controlled can be connected via normally opened contacts of the relay.
For demonstration a 9 volts battery can be used.
For continuous use, alarm may be powered using 9 volts or 12 volts AC adaptor. Simple unregulated supply is enough. This alarm can be used to protect car and other vehicles. Other application of this project is an earthquake warning alarm.


Reference: http://seminarsprojects.in/showthread.ph...z4Fsx4CJNe
Reply
#3
Abstract

In this modern world everyone wants something new, something different, so instead of using aswitch to ring the door bell just an alarm is produced by knocking the door which people feelmore luxurious. The circuit of automatic alarm on knocking uses a thin piezoelectric plate,senses the vibration generated on knocking a surface (such as a door or a table) to activate thealarm and can also be used to safeguard motor vehicles. The piezoelectric plate is used as thesensor. It consist IC 555 Timer to which speaker is connected at the output. Piezoelectricmaterial is used at the input in order to convert any mechanical vibration into electrical variation,it avoids false triggering. The plate can be fixed on a door, cash box, cupboard, etc usingadhesive. A 1-1.5m long, shielded wire is connected between the sensor plate and the input of the circuit. A led is placed at the output of the IC 555 Timer. The circuit operates off a 9V or a12V battery.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: ic555 knock alarm, description of knock alarm, knock vibration alarm information wikipedia, advantages of knock alarm, vibration activated alarm project, advantages of door knock alarm wikipedia, knock vibration activated alarm circuit project,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Over Speed Alarm Indicators of Electrical Motor with Digital RPM Indicator 0 250 25-07-2023, 05:33 AM
Last Post:
  dramatically working order know-how and retention of viva voce 0 654 11-10-2019, 08:59 AM
Last Post:
Information working principles of escalator 0 1,139 18-02-2019, 04:38 PM
Last Post:
  Earthquake detection alert alarm for people security ppt 0 864 06-01-2019, 09:29 AM
Last Post:
  Earthquake detection alert alarm for people security 0 784 06-01-2019, 09:25 AM
Last Post:
  fire alarm project for class xii pdf 0 1,180 31-10-2018, 08:37 PM
Last Post: Guest
  advantages and disadvantages mains failure alarm circuit in pdf 0 780 01-10-2018, 11:48 PM
Last Post: Guest
Tongue engine overheat alarm pdf 0 535 04-08-2018, 08:32 AM
Last Post: Guest
  working principle of igbt ppt 0 577 18-06-2018, 04:41 PM
Last Post: Guest
  working principle of box transport mechanism 0 625 25-05-2018, 11:31 AM
Last Post: Guest

Forum Jump: