12-11-2014, 02:14 AM
what are the components to make rfid based banking system?
|
the use of rfid in banking pdf file
|
what are the components to make rfid based banking system?
12-11-2014, 10:02 PM
To get full information or details of rfid based banking system please have a look on the pages
http://studentbank.in/report-RFID-BASED-BANKING-SYSTEM
if you again feel trouble on rfid based banking system please reply in that page and ask specific fields in rfid based banking system
http://studentbank.in/report-RFID-BASED-BANKING-SYSTEM
if you again feel trouble on rfid based banking system please reply in that page and ask specific fields in rfid based banking system
12-11-2014, 11:10 PM
BANKING SYSTEM BASED ON RFID
In this project, the RFID reader module typically contains a module (transmitter and receiver), control unit and Connector (antenna). This module communicates with the microcontroller and when the card is brought near the RFID module ' reads the identification code on the card and then compare with the identification code present in the system, and if it matches the door gets opened in a clockwise direction and the man gets in and after a while the door closes automatically.
Then to access your bank IE, any deal that is made in the system you will need to enter your user ID and password, if it then use the keypad to the success you can access the way you want to do. If the password does not match Then it will be passed after only 3 likely mode of the system, and it gets to them indicates that it is with buzzer. To build an unmatched card, he warns people around, giving the sound a buzzer with 3LEDs through dance.
A significant advantage of RFID systems of all types is a non-contact, in the absence of a direct line of sight of the nature of technology. Tags can be read through a variety of substances, such as snow, fog, ice, paint, crusted dirt and other visually and environmentally difficult conditions where barcodes or other optically read technologies would be useless. This project can provide security for the industry, companies, etc
This project uses a regulated 5V, 500mA power supplies. 7805 three terminal regulator, is used to regulate the voltage. Full bridge rectifier type is used to correct AC 230/12V secondary output step-down transformer module RFID requires a separate power supply 5V.
Introduction to RFID technology
Radio frequency identification (RFID) is an automatic identification method, relying on storing and remotely retrieve date is called using RFID tags and transponder devices. technology requires some degree of cooperation the RFID reader and RFID tags year year.
RFID label can be a year or included in the product, animal, or person with the purpose of identification and tracking using radio waves. Some tags can be several meters and read from outside the line of sight of the reader.
RFID label can be a year or included in the product, animal, or person with the purpose of identification and tracking using radio waves. Some tags can be several meters and read from outside the line of sight of the reader.
What is RFID?
Basic RFID system consists of three components:
coil or antenna)
b) transceiver (with decoder)
in) the respondent (radio frequency tag)
Electronically programmed with unique information. There are many different types of RFID systems in the market. They are classified according to the frequency bands out there. Some of the most commonly used RFID sets is as follows:
1) low frequency (30 kHz to 500 kHz)
2) average rate (900KHz to 1500 MHz)
3) high frequency (2.4 to 2.5 Ghz)
Mainly woven say radio frequency ranges ranges from low-frequency tags ranging from 3 m to 5 m tag, mid range in the range from 5 m to 17 m high and from 5 feet to 90 feet. the cost of the system is based On the low frequency bands with there system, ranging from a few hundred dollars up to high frequency in the range from soewhere system 5000 dollars.
How RFID is changing the business environment today
Technology of radio frequency identification (RFID) has been in use for several decades, to track and identify items, assets and even live. Lately, however, RFID has a broad corporate interest as a means to improve the performance of the supply chain. Market activity was exploding with suppliers of June 2003 Wal-Mart 100 his best this statement must be RFID-compliant by January 2005, Wal-Mart's mandates and the Ministry of defence (MOD) is making many companies trying to find assess, select and implement solutions that will make them comply with the requirements of its customers and of additional retail, RFID and other large supply chain channels Wizard, will likely follow suit.
In this project, the RFID reader module typically contains a module (transmitter and receiver), control unit and Connector (antenna). This module communicates with the microcontroller and when the card is brought near the RFID module ' reads the identification code on the card and then compare with the identification code present in the system, and if it matches the door gets opened in a clockwise direction and the man gets in and after a while the door closes automatically.
Then to access your bank IE, any deal that is made in the system you will need to enter your user ID and password, if it then use the keypad to the success you can access the way you want to do. If the password does not match Then it will be passed after only 3 likely mode of the system, and it gets to them indicates that it is with buzzer. To build an unmatched card, he warns people around, giving the sound a buzzer with 3LEDs through dance.
A significant advantage of RFID systems of all types is a non-contact, in the absence of a direct line of sight of the nature of technology. Tags can be read through a variety of substances, such as snow, fog, ice, paint, crusted dirt and other visually and environmentally difficult conditions where barcodes or other optically read technologies would be useless. This project can provide security for the industry, companies, etc
This project uses a regulated 5V, 500mA power supplies. 7805 three terminal regulator, is used to regulate the voltage. Full bridge rectifier type is used to correct AC 230/12V secondary output step-down transformer module RFID requires a separate power supply 5V.
Introduction to RFID technology
Radio frequency identification (RFID) is an automatic identification method, relying on storing and remotely retrieve date is called using RFID tags and transponder devices. technology requires some degree of cooperation the RFID reader and RFID tags year year.
RFID label can be a year or included in the product, animal, or person with the purpose of identification and tracking using radio waves. Some tags can be several meters and read from outside the line of sight of the reader.
RFID label can be a year or included in the product, animal, or person with the purpose of identification and tracking using radio waves. Some tags can be several meters and read from outside the line of sight of the reader.
What is RFID?
Basic RFID system consists of three components:
coil or antenna)
b) transceiver (with decoder)
in) the respondent (radio frequency tag)
Electronically programmed with unique information. There are many different types of RFID systems in the market. They are classified according to the frequency bands out there. Some of the most commonly used RFID sets is as follows:
1) low frequency (30 kHz to 500 kHz)
2) average rate (900KHz to 1500 MHz)
3) high frequency (2.4 to 2.5 Ghz)
Mainly woven say radio frequency ranges ranges from low-frequency tags ranging from 3 m to 5 m tag, mid range in the range from 5 m to 17 m high and from 5 feet to 90 feet. the cost of the system is based On the low frequency bands with there system, ranging from a few hundred dollars up to high frequency in the range from soewhere system 5000 dollars.
How RFID is changing the business environment today
Technology of radio frequency identification (RFID) has been in use for several decades, to track and identify items, assets and even live. Lately, however, RFID has a broad corporate interest as a means to improve the performance of the supply chain. Market activity was exploding with suppliers of June 2003 Wal-Mart 100 his best this statement must be RFID-compliant by January 2005, Wal-Mart's mandates and the Ministry of defence (MOD) is making many companies trying to find assess, select and implement solutions that will make them comply with the requirements of its customers and of additional retail, RFID and other large supply chain channels Wizard, will likely follow suit.
|
« Next Oldest | Next Newest »
|
