synopsis of hydraulic arm using syringe

Hydraulics is used in many applications we see or use every day. The brakes in an automobile or the lift on the bucket of a tractor are two very common applications. We can experiment with simple hydraulics using plastic syringes for cylinders and small plastic tubing for the hydraulic hose. One definition I read for hydraulics was, “the movement of pressurized liquids through confined spaces”.
Like working with gears, pulleys, or levers; a mechanical advantage can be realized by using different size cylinders on the end of the hydraulic connections. By trading distance moved with the amount of force the advantage is realized.

Introduction:- In this projects demonstrate the hydraulics system using syringe in the form of arm which is actuated by manually the syringe plunger. Constriction of this projects using plastics sheets. Arm has three movements called three axis, arm can move up and down.

Features

Lift Material Approx 20gm
Approx three axis movement
All movement are connected by Syringe
Light wt Assembly
Component

12 ml Syringe
Aquarium pipe
Plastic sheet
Screw
Documents

Projects Synopsis
Project report
3D model in solid works
Prototype model

hydraulic lift project have any relation with mass &applied force????

It uses syringes and rubber tubes to act as a hydraulic system. For the most part, the syringes work well, but filling them so there is no trapped air is a pain. Since the water is practically in compressible, the plungers of the syringe must move equally because both syringes are of the same diameter.