04-04-2017, 11:44 PM
hi please can you send me the report of autopilot mode technology in vehicles
|
seminar topic on auto pilot mode technology vehicles
|
hi please can you send me the report of autopilot mode technology in vehicles
10-04-2017, 11:53 AM
The word "autopilot" mode here refers to the application process of advanced technology in vehicles that allows you to auto-drive on high-way roads without the control of humans. This process is going to be achieved through the use of Radar, Sensors and Advanced GPS Maps. First, a compact route is selected from where the user wants to go on the GPS map.
When the engine is started, the entire equipment will begin to take positioning. The readings are obtained from the radar every second. It detects objects at the 180 'angle limit and continuously feeds the control unit. This control unit is built with many conditions that make the vehicle move in possible safe directions. Here 50% of the work is done by the radar team and the rest of the work is done using the advanced GPS map to make a safe trip. Independent signals are obtained from ground level to detect speed switches and road conditions. The same set of equipment is fixed to the rear of the vehicle to prevent other vehicles from hitting the rear of the user's vehicle.
This autopilot mode technology is a research project. By applying this technology in vehicles it allows you to self-drive on the roads without the control of humans. This technology creates a new revolution in the field of automobile and transportation. It helps the user to save valuable valuable time that is wasted while driving and it is not necessary for drivers to always be seated in the driver's seat except where the signals and road meters are located. Many accidents occur because of the negligence of the drivers. This can be avoided by implementing this autopilot mode technology. In this technology many advanced equipment will be used to make a safe trip. This autopilot mode technology is going to be created by combining several departments in engineering. But among these engineering departments four departments will play an important role.
They are the departments of Mechanics, Electronics, Computer Science and Computer Science. The mechanical department will take care of all the mechanical movements of the vehicle. The Electronics Department is responsible for the search of programs carried out by the programmers in the control unit and for their correct operation. Information technology and IT departments are going to be the backbone of this technology. The programs made by the programmers will be responsible for the working conditions of the control unit. Let's look at the components and operation of this technology in the following paragraphs. A discussion on this technology has already been made by HONDA UK in 2006, but has many doubts and does not explain the operation of this technology. I had created a new way to overcome this setback and I had explained this process in detail in the following paragraphs in my own creation.
COMPONENTS
This technology contains four main components. They are,
RADARS
SENSORS
ADVANCED MAPPING GPS SYSTEMS
VISUALIZATION UNIT
WORKING
This technology depends on the components that are represented above. First select the compact map route to the place where the user wants to go on the GPS maps in the display unit. When the user starts the engine the whole equipment will take positioning. The readings are obtained from the radar every second. It detects objects at the 180 'angle limit and continuously feeds the control unit there by moving the vehicle in safe and proper directions. Control unit is built with a lot of conditions that causes the vehicle to move in possible safe directions according to the readings of the radar, sensor and GPS maps.
![[Image: auto-pilot-mode-technology-in-vehicles_c...age002.jpg]](http://www.seminarsonly.com/mech%20&%20auto/auto-pilot-mode-technology-in-vehicles_clip_image002.jpg)
Here 50% of the work is done by the radar team and the rest of the work is done using the advanced GPS map to make a safe trip. Separate signals are obtained from the sensors that are kept at the bottom of the car directly to the wheel to detect the speed switches and road damages that help the vehicle to accelerate at the speed switch and damaged road areas. The advanced GPS mapping technology makes the car stay in the Indian "keep left" rule. Synchronize the vehicle and the road. This only helps the vehicle to rotate properly during cornering. The same set of equipment is attached to the rear of the vehicle to prevent other vehicles from hitting the user's vehicle during acceleration, cornering and overtaking.
When the engine is started, the entire equipment will begin to take positioning. The readings are obtained from the radar every second. It detects objects at the 180 'angle limit and continuously feeds the control unit. This control unit is built with many conditions that make the vehicle move in possible safe directions. Here 50% of the work is done by the radar team and the rest of the work is done using the advanced GPS map to make a safe trip. Independent signals are obtained from ground level to detect speed switches and road conditions. The same set of equipment is fixed to the rear of the vehicle to prevent other vehicles from hitting the rear of the user's vehicle.
This autopilot mode technology is a research project. By applying this technology in vehicles it allows you to self-drive on the roads without the control of humans. This technology creates a new revolution in the field of automobile and transportation. It helps the user to save valuable valuable time that is wasted while driving and it is not necessary for drivers to always be seated in the driver's seat except where the signals and road meters are located. Many accidents occur because of the negligence of the drivers. This can be avoided by implementing this autopilot mode technology. In this technology many advanced equipment will be used to make a safe trip. This autopilot mode technology is going to be created by combining several departments in engineering. But among these engineering departments four departments will play an important role.
They are the departments of Mechanics, Electronics, Computer Science and Computer Science. The mechanical department will take care of all the mechanical movements of the vehicle. The Electronics Department is responsible for the search of programs carried out by the programmers in the control unit and for their correct operation. Information technology and IT departments are going to be the backbone of this technology. The programs made by the programmers will be responsible for the working conditions of the control unit. Let's look at the components and operation of this technology in the following paragraphs. A discussion on this technology has already been made by HONDA UK in 2006, but has many doubts and does not explain the operation of this technology. I had created a new way to overcome this setback and I had explained this process in detail in the following paragraphs in my own creation.
COMPONENTS
This technology contains four main components. They are,
RADARS
SENSORS
ADVANCED MAPPING GPS SYSTEMS
VISUALIZATION UNIT
WORKING
This technology depends on the components that are represented above. First select the compact map route to the place where the user wants to go on the GPS maps in the display unit. When the user starts the engine the whole equipment will take positioning. The readings are obtained from the radar every second. It detects objects at the 180 'angle limit and continuously feeds the control unit there by moving the vehicle in safe and proper directions. Control unit is built with a lot of conditions that causes the vehicle to move in possible safe directions according to the readings of the radar, sensor and GPS maps.
Here 50% of the work is done by the radar team and the rest of the work is done using the advanced GPS map to make a safe trip. Separate signals are obtained from the sensors that are kept at the bottom of the car directly to the wheel to detect the speed switches and road damages that help the vehicle to accelerate at the speed switch and damaged road areas. The advanced GPS mapping technology makes the car stay in the Indian "keep left" rule. Synchronize the vehicle and the road. This only helps the vehicle to rotate properly during cornering. The same set of equipment is attached to the rear of the vehicle to prevent other vehicles from hitting the user's vehicle during acceleration, cornering and overtaking.
|
« Next Oldest | Next Newest »
|
Important Note..!
If you are not satisfied with above reply ,..PleaseASK HERE
So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page| Tagged Pages: seminar on auto pilot mode technology in vehicle, autopilot mode technology in vehicles report, |
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| HiFi Technology | 0 | 2,295 |
19-04-2023, 05:39 PM Last Post: |
||
| seminar on movable bridge pdf | 0 | 5,328 |
05-11-2020, 10:32 PM Last Post: |
||
| seminar topic for bca download | 1 | 7,043 |
14-11-2018, 09:04 PM Last Post: |
||
| green manufacturing full seminar report download | 0 | 6,166 |
10-11-2018, 10:54 AM Last Post: Guest |
||
| list of seminar topics in botany | 0 | 6,565 |
06-11-2018, 04:25 PM Last Post: Guest |
||
| seminar on 132 33 kv substation | 0 | 6,008 |
29-10-2018, 12:23 PM Last Post: Guest |
||
| liquid electricity technical seminar ppt | 0 | 6,301 |
19-10-2018, 10:52 PM Last Post: Guest |
||
| seminar topics on hydrobiology | 0 | 6,005 |
19-10-2018, 02:02 PM Last Post: Guest |
||
| fly ash bricks seminar report | 0 | 5,885 |
19-10-2018, 11:06 AM Last Post: Guest |
||
| diamond ultimate semiconductor seminar report pdf | 0 | 6,294 |
18-10-2018, 11:41 AM Last Post: Guest |
||