REMOTE NOTICE BOARD USING GSM WITH SMS

[seminar surveyer]

---

[attachment=6515]

---

REMOTE NOTICE BOARD USING GSM WITH SMS
INTRODUCTION
This project is based on VTU syllabus. The proposed system is based on ATMEL 89S52 µcontroller which is in our syllabus.
For doing this project we use some of the software like
 Embedded C for programming the application software to the microcontroller.
 Protel schematic software is used for designing the circuit diagram for this project.
 Express PCB software is used for designing the PCB for this project.
(Since PCB making is a big process and involves lot of machineries which are expensive, we are going to outsource this to the manufacturer.)

ABSTRACT :
Now a days every advertisement is going to be digital. The big shops and shopping centers are using the digital moving displays now. In Railway station and bus stands everything that is ticket information, platform number etc is displaying in digital moving display. But in these displays if they wants to change the message or style they have to go there and connect the display to PC or laptop.
Suppose the same message if the person wants to display in main centers of the cities means he have to go there with laptop and change the message by connecting into PC.This project we can use mainly for police or army .I.e. displays will be connected to all the main centers in city if they wants to display messages about something crucial within 5 minute, they can’t
So keeping in this mind we are designing a new display system which can access remotely, we are using the GSM technology to access the display’s is one of the new technology in the embedded field to make the communication between microcontroller and mobile.
This project is a remote notice board with MODEM connected to it, so if the user wants to display some messages, he will send the messages in SMS format the MODEM in the display system will receive the message and update the display according to the message. For every message received from the user mobile, the system will check for the password and if the password is correct the controller will display the message. the LED s on the digital display board uses the latest hi-bread LCD modules (hi-bright), where LEDs are mounted on a rectangle plastic like enclosure and then wired as the 8/5 led matrix with 5 column and 8 rows. These LED’s have more brightness compared to the other LED now available in the market.

COMPONENTS USED:
 Power Supply 5v DC - 7805
 Microcontroller - P89C51RD2 -Phillips
 Crystal - 11.0592 MHz
 Shift register - 74HCT164
 Memory - Atmel 64k EEPROM
 MAX 232 - For Serial Communication
 Buzzer - Freq-1 to 18khz.Volt-5v-12vDC
 GSM Transmitter and Receiver
 5*8 led matrix display

SOFTWARES USED:
 Embedded C.

WORKING PRINCIPLE:
This is a very good project for college, police etc. This project has a moving message display, which can be used as the digital notice board, and also a GSM modem, which is the latest technology used for communication between the mobile and the embedded devices.
System will work like when the user wants to display or update the notice board, he have to sent the message in his mobile defining the messages and then the password of the system to the number of the sim which is inserted in the display system MODEM. Then the MODEM connected to the display system will receive the SMS, the microcontroller inside the system is programmed in such a way that when the modem receives any message the microcontroller will read the message form serial port and verify for the password, if the pass word is correct then it will start displaying the messages in the display system
The messages are displayed on the system using high speed techniques, the entire display column is connected to shift register output so that the characters are first shifting to each column and then the microcontroller will switch on the row one by one with small delay. This process is continuing in high speed so that the viewer will feel the display in a more brightness

[padmini21]

hi can i hav the programing of the project
your project is really interesting
plz help out with the circuit and the programing
thank you in advance

[seminar surveyer]

sorry padmini21
we'll update it soon

[Avinash Krishnappa]

Hellow sir ....
me and my frinds r doing the same project as our final year project ..
v r strucked in coding part so can u plz provide code for us......
v r looking for ur response....
Thanking u....

[seminar class]

[attachment=9649]
Remote Notice Board using GSM with SMS
DESCRIPTION :
Now a days every advertisement is going to be digital. The big shops and shopping centers are using the digital moving displays now. In Railway station and bus stands everything that is ticket information, platform number etc is displaying in digital moving display. But in these displays if they wants to change the message or style they have to go there and connect the display to PC or laptop.
Suppose the same message if the person wants to display in main centers of the cities means he have to go there with laptop and change the message by connecting into PC. This project we can use mainly for police or army .I.e. displays will be connected to all the main centers in city if they wants to display messages about something crucial within 5 minute, they can’t. So keeping this in mind we are designing a new display system which can access remotely, we are using the GSM technology to access the display’s is one of the new technology in the embedded field to make the communication between microcontroller and mobile.
This project is a remote notice board with MODEM connected to it, so if the user wants to display some messages, he will send the messages in SMS format the MODEM in the display system will receive the message and update the display according to the message. For every message received from the user mobile, the system will check for the password and if the password is correct the controller will display the message. the LED s on the digital display board uses the latest hi-bread LCD modules (hi-bright), where LEDs are mounted on a rectangle plastic like enclosure and then wired as the 5x8 LED matrix with 5 column and 8 rows. These LED’s have more brightness compared to the other LED now available in the market.
TECHNOLOGY : GSM Technology
WORKING :
This is a very good project for college, police etc. This project has a moving message display, which can be used as the digital notice board, and also a GSM modem, which is the latest technology used for communication between the mobile and the embedded devices.
System will work like when the user wants to display or update the notice board, he have to send the message in his mobile defining the messages and then the password of the system to the number of the SIM which is inserted in the display system MODEM. Then the MODEM connected to the display system will receive the SMS, the microcontroller inside the system is programmed in such a way that when the modem receives any message the microcontroller will read the message form serial port and verify for the password, if the password is correct then it will start displaying the messages in the display system.
The messages are displayed on the system using high speed techniques, the entire display column is connected to shift register output so that the characters are first shifting to each column and then the microcontroller will switch on the row one by one with small delay. This process is continuing in high speed so that the viewer will feel the display in a more brightness.
EXAMPLE :
Shopping Malls, Bus Stands etc
OUR CHALLENGING WORK IN THIS PROJECT:
• Writing the Code for the Microcontroller using Embedded ‘C’ for 8051
• GSM
% OF SOFTWARE & HARDWARE :
• Embedded C – 40%
• Microcontroller Hardware – 60%
FUTURE ENHANCEMENT :
Now we are displaying the messages in scrolling mode only, in future we can add so many designs so that user can send style command with message he wants to display. We can add one more concept that user can sent 10 messages at a time with different styles.
MAIN COMPONENTS USED :
• 5 V DC Power Supply
• ATMEL AT89S52 Microcontroller
• RS 232 for Serial Communication – MAX 232
• External EEPROM Memory – AT24C02
• Buzzer – Frequency ( 1 to 18 KHz, 5V – 12V DC )
• Shift Register – 74HTC164
• GSM Transmitter & Receiver
• 5 x 8 LED Matrix Display
DESCRIPTION OF MAIN BLOCKS :
Micro Controller:
The AT89S52 is a low-power, high-performance CMOS 8-bit microcontroller with 8K bytes of in-system programmable Flash memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry- standard 80C51 instruction set and pin out.
Features
• 8K Bytes of In-System Programmable (ISP) Flash Memory
• Endurance: 1000 Write/Erase Cycles
• 4.0V to 5.5V Operating Range
• 256 x 8-bit Internal RAM
• 32 Programmable I/O Lines
• Full Duplex UART Serial Channel
• Fully Static Operation : 0 Hz to 33 MHz
Vital Role of Power Supply in ‘Remote Notice Board using GSM with SMS’
The adapter output voltage will be 12V DC non-regulated. The 7805/7812 voltage regulators are used to convert 12 V unregulated to regulated 5V/12V DC.
The microcontroller and other devices get power supply from AC to DC adapter through voltage regulator. The adapter output voltage will be 12V DC non-regulated. The 7805 voltage regulators are used to convert 12 V to 5VDC.
Vital Role of Micro Controller–AT89S52 in ‘Remote Notice Board using GSM with SMS’
The microcontroller inside the system is programmed in such a way that when the modem receives any message the microcontroller will read the message form serial port and verify for the password, if the pass word is correct then it will start displaying the messages in the display system.
The microcontroller is used to display the display system with LED connected as rows and columns using high speed scanning technique.
LCD is connected to microcontroller as 4 bit data mode, before displaying anything in LCD Initialization have to do, so microcontroller will control the LCD initialization and select the data register and command register according to the purpose.
Memory is connected to microcontroller using two pins, it is communicating with the microcontroller through I2C communication.
Buzzer is controlled by the microcontroller using single pins, i.e., giving high means device will switch on and vice versa. Sometimes it may be interchange according to the transistor used to drive the device.
Memory
These memory devices are used to store the data for off line process. The AT24C02A / 04A/ 08A/ 32/64 provides 2048/4096/8192/32,768/65,536 bits of serial electrically erasable and programmable read only memory (EEPROM) organized as 56/512/1024/4096/8192 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential. The AT24C02A/04A/08A is available in space saving 8-pin PDIP.
Features
Internally Organized 256 x 8 (2K), 512 x 8 (4K) or 1024 x 8 (8K)
2-Wire Serial Interface (I2C protocol)
High Reliability
– Endurance: 1 Million Write Cycles
– Data Retention: 100 Years
– ESD Protection: >3000V
Vital role of External EEPROM memory in ‘Remote Notice Board using GSM with SMS’
EEPROM memory is electrically erasable programmable memory, it is communicating with the microcontroller using 12C communication i.e., it contains one data pin and clock pin, these device is connected as slave to the microcontroller. The main application of memory in this project is to store the message coming form user mobile, the microcontroller is doing the operation of writing and reading to memory.
RS 232 Protocol
RS-232 was created for one purpose, to interface between Data Terminal Equipment (DTE) and Data Communications Equipment (DCE) employing serial binary data interchange. So as stated the DTE is the terminal or computer and the DCE is the modem or other communications device.
RS-232 pin-outs for IBM compatible computers are shown below. There are two configurations that are typically used: one for a 9-pin connector and the other for a 25-pin connector.

[seminar class]

[attachment=12815]
INTRODUCTION
1.1 General Introduction:
In today’s world it is said that, world is shrinking day by day. It is due to the fact that people from different parts of the world are able to communicate with each other within fractions of seconds. All these advantages are possible due to the advantages in digital communication techniques. With the advent of cellular technology the use of mobile telephones are increased drastically over the years. In today’s world of technological advancements communications and control is necessary in any part of the world.
The novel idea of this project is to receive message through mobile phones and send it to Notice Board for display. This project is basically a micro controller- based design used to control remote notice board. P89C52RD2BN is heart of this project. Here, we use mobile phones as a message sender, sending messages to notice board by sending appropriate SMS and receiving SMS whenever there is no problem. The mobile used is GSM technology.
The key strength of GSM is its international roaming capability giving consumers a seamless service, superior speech quality, universal and in-expensive mobile phones, Digital convenience, New services(Call waiting , Call forwarding, SMS). SMS is a GSM service by which we can send and receive data, to and from another GSM handset. The message can be comprised of words or numbers or an alpha numerical combination.
The main advantage of SMS service are it’s an available communication tool those with speech or hearing difficulties. And if you get an SMS and you are outside of the GSM coverage area SMS will be stored and you will be received it as soon as you entered the network coverage area. This will always keep you aware of the security situation of your home/office.
Using “attention commands” (AT Commands) GSM modem operations can be controlled.
1.2 Objective of the study:
The main objective of selecting this project is to gain knowledge and experience in developing a real time application. Apart from this, to gain the Knowledge of P89C52RD2BN Micro Controller, GSM modem and the way in which these can be used to receive messages and display on notice board.
8052 is a popular micro controller. There are number of 8052 applications. Micro controller can be programmed to run only one specific application.. It can be programmed to accomplish the specific job faster.
GSM modems are widely used in mobile phones. The working of the modem can be controlled by “AT” commands. There are many “AT” commands like “AT+CMGR” to read a message etc.
1.3 Scope of literature:
System using GSM includes only three applications. Notice Board are connected to the system just to show that, it is possible to control various notice board using micro controller.
In this project the software has been written to send and receive messages. When a message has to be sent a command is sent to the GSM modem. But, this project would not guarantee, that the message sent would reach the destination, if GSM service does not exist. This is not in the scope of this project.
1.4 Review of the Project:
Many books have provided valuable information that was very useful for this project.
One such book authored by MD. ALI MAZIDI and JANICE GILLIPSE MAZIDI titled “THE 8052 MICRO CONTROLLER AND EMBEDED SYSTEMS”.
1.5 Introduction to EMBEDED SYSTEMS:
Embedded systems are designed to do some specific task, rather than be a general-purpose computer for multiple tasks. Some also have real time performance constraints that must be met, for reason such as safety and usability; others may have low or no performance requirements, allowing the system hardware to be simplified to reduce costs.
An embedded system is not always a separate block - very often it is physically built-in to the device it is controlling. The software written for embedded systems is often called firmware, and is stored in read-only memory or flash convector chips rather than a disk drive. It often runs with limited computer hardware resources: small or no keyboard, screen, and little memory.
Wireless communication has become an important feature for commercial products and a popular research topic within the last ten years. There are now more mobile phone subscriptions than wired-line subscriptions. Lately, one area of commercial interest has been low-cost, low-power, and short-distance wireless communication used for \personal wireless networks." Technology advancements are providing smaller and more cost effective devices for integrating computational processing, wireless communication, and a host of other functionalities. These embedded communications devices will be integrated into applications ranging from homeland security to industry automation and monitoring. They will also enable custom tailored engineering solutions, creating a revolutionary way of disseminating and processing information. With new technologies and devices come new business activities, and the need for employees in these technological areas. Engineers who have knowledge of embedded systems and wireless communications will be in high demand. Unfortunately, there are few adorable environments available for development and classroom use, so students often do not learn about these technologies during hands-on lab exercises. The communication mediums were twisted pair, optical fiber, infrared, and generally wireless radio.
CHAPTER 2
DESIGN
The systems design process partitions the requirements to either hardware or software systems. It establishes the overall system architecture. Software design involves the representing the software system functions in a form that may be transformed into one or more executable programs. The design involves the design of hardware as well as software part required for the project.
2.1 Block Diagram:
[b]Receiver:
Transmitter:
2.2 Design Process:
Design Process
Hardware Design
Software Design
2.3 Hardware Design:
2.3.1 Microcontroller Introduction:
Features: [/b]
• Compatible with MCS-51™ Products
• 8K Bytes of In-System Reprogrammable Flash Memory
• Endurance: 1,000 Write/Erase Cycles
• Fully Static Operation: 0 Hz to 24 MHz
• Three-level Program Memory Lock
• 256 x 8-bit Internal RAM
• 32 Programmable I/O Lines
• Three 16-bit Timer/Counters
• Eight Interrupt Sources
• Programmable Serial Channel
• Low-power Idle and Power-down Modes
Description:
The AT89C52 is a low-power, high-performance CMOS 8-bit microcomputer with 8K bytes of Flash programmable and erasable read only memory (PEROM). The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 and 80C52 instruction set and pinout.The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C52 is a powerful microcomputer which provides a highly-flexible and cost-effective solution to many embedded control applications.
The AT89C52 provides the following standard features: 8K bytes of Flash, 256 bytes of RAM, 32 I/O lines, three 16-bit timer/counters, a six-vector two-level interrupt architecture, a full-duplex serial port, on-chip oscillator, and clock circuitry. In addition, the AT89C52 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power-down mode saves the RAM contents but freezes the oscillator, disabling all other chip functions until the next hardware reset.

[cndn]

sir plz send me all program related to this project...........

[seminar addict]

To get more information about the topic "REMOTE NOTICE BOARD USING GSM WITH SMS " please refer the page link below

http://studentbank.in/report-remote-noti...m-with-sms

http://studentbank.in/report-remote-noti...1#pid56631

[richper]

I want to make contact with the creator of this project/product please.
Have a variation of it that I would like to engineer with the help of the author/builder.
Contact information would be useful.
Thanks in advance
Richard
Montreal

[seminar addict]

To get more information about the topic "REMOTE NOTICE BOARD USING GSM WITH SMS " please refer the page link below

http://studentbank.in/report-remote-noti...m-with-sms

http://studentbank.in/report-remote-noti...1#pid56631

[seminar addict]

to get information about the topic gsm based wireless notice board full report ,ppt and related topic refer the page link bellow
http://studentbank.in/report-remote-noti...m-with-sms

[swetha9898]

can you plz post the circuit diagram and source code for the project

[seminar paper]

To get more information about the topic "REMOTE NOTICE BOARD USING GSM WITH SMS " please refer the page link below

http://studentbank.in/report-remote-noti...m-with-sms

http://studentbank.in/report-remote-noti...1#pid56631

---

[Guest]

sdYYf asdf sads fafadfasfasfas fasdf asf adf adfa fafa dsaf asf afa fadfafda adsfadsf aadfsf asdfa fadfadfa

[seminar report asees]

To get full information or details of REMOTE NOTICE BOARD USING GSM WITH SMS please have a look on the pages

http://studentbank.in/report-remote-noti...m-with-sms

if you again feel trouble on REMOTE NOTICE BOARD USING GSM WITH SMS please reply in that page and ask specific fields in REMOTE NOTICE BOARD USING GSM WITH SMS