|
power hacksaw machine wikipedia
|
23-03-2016, 02:48 PM
power hacksaw machine wikipedia
A hacksaw is a fine-toothed saw, originally and principally for cutting metal. They can also cut various other materials, such as plastic and wood; for example, plumbers and electricians often cut plastic pipe and plastic conduit with them. There are hand saw versions and powered versions (power hacksaws). Most hacksaws are hand saws with a C-shaped frame that holds a blade under tension. Such hacksaws have a handle, usually a pistol grip, with pins for attaching a narrow disposable blade. The frames may also be adjustable to accommodate blades of different sizes. A screw or other mechanism is used to put the thin blade under tension. Panel hacksaws forgo the frame and instead have a sheet metal body; they can cut into a sheet metal panel further than a frame would allow. These saws are no longer commonly available, but hacksaw blade holders enable standard hacksaw blades to be used similarly to a keyhole saw or pad saw. Power tools including nibblers, jigsaws, and angle grinders fitted with metal-cutting blades and discs are now used for longer cuts in sheet metals.
On hacksaws, as with most frame saws, the blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke. In normal use, cutting vertically downwards with work held in a bench vice, hacksaw blades should be set to be facing forwards. Some frame saws, including Fret Saws and Piercing Saws, have their blades set to be facing the handle because they are used to cut by being pulled down against a horizontal surface.
Power hacksaws are used to cut large sizes (sections) of metals such as steel. Cutting diameters of more than 10/15mm is very hard work with a normal hand held hacksaw. Therefore power hacksaws have been developed to carry out the difficult and time consuming work.
The metal to be cut is held in a machine vice which is an integral part of the base. Turning the handle tightens or loosens the vice. The vice is very powerful and locks the metal in position.
When cutting is taking place, the metal and especially the blade heats up quickly. Coolant should be fed onto the blade, cooling it down and lubricating it as it cuts through the metal.
Without the use of coolant the blade will over heat and break/snap. This can be dangerous as the blade can break with powerful force, shattering.
A hacksaw is a fine-toothed saw, originally and principally for cutting metal. They can also cut various other materials, such as plastic and wood; for example, plumbers and electricians often cut plastic pipe and plastic conduit with them. There are hand saw versions and powered versions (power hacksaws). Most hacksaws are hand saws with a C-shaped frame that holds a blade under tension. Such hacksaws have a handle, usually a pistol grip, with pins for attaching a narrow disposable blade. The frames may also be adjustable to accommodate blades of different sizes. A screw or other mechanism is used to put the thin blade under tension. Panel hacksaws forgo the frame and instead have a sheet metal body; they can cut into a sheet metal panel further than a frame would allow. These saws are no longer commonly available, but hacksaw blade holders enable standard hacksaw blades to be used similarly to a keyhole saw or pad saw. Power tools including nibblers, jigsaws, and angle grinders fitted with metal-cutting blades and discs are now used for longer cuts in sheet metals.
On hacksaws, as with most frame saws, the blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke. In normal use, cutting vertically downwards with work held in a bench vice, hacksaw blades should be set to be facing forwards. Some frame saws, including Fret Saws and Piercing Saws, have their blades set to be facing the handle because they are used to cut by being pulled down against a horizontal surface.
Power hacksaws are used to cut large sizes (sections) of metals such as steel. Cutting diameters of more than 10/15mm is very hard work with a normal hand held hacksaw. Therefore power hacksaws have been developed to carry out the difficult and time consuming work.
The metal to be cut is held in a machine vice which is an integral part of the base. Turning the handle tightens or loosens the vice. The vice is very powerful and locks the metal in position.
When cutting is taking place, the metal and especially the blade heats up quickly. Coolant should be fed onto the blade, cooling it down and lubricating it as it cuts through the metal.
Without the use of coolant the blade will over heat and break/snap. This can be dangerous as the blade can break with powerful force, shattering.
|
« Next Oldest | Next Newest »
|
Important Note..!
If you are not satisfied with above reply ,..PleaseASK HERE
So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page| Tagged Pages: power hacksaw machine wikipedia, |
