Pneumatic Bearing Puller

Submitted By :
V.N.Ashwin Vadhulya

Pneumatic Bearing Puller

 This project is deals with design and fabrication of a pneumatic bearing puller, which is used for removing bearings from the shaft and the bearing cup with the help of a compressor.
 Initially the bearing shaft is held between two fixtures. The compressed air is passed to the direction control valve. The top fixture is moves towards downwards, so that the bearing is removed from the shaft.
 The pneumatic bearing puller is used to removing the bearings in the shaft by holding the bearing shaft in between two fixtures. One of the fixtures is movable and the other one is fixed.
 The principle of operation is the same as the conventional simple press. The difference is being only in the type of drive and the type of fixtures used.
 The following points reveals why we have to make use of this type of press for removing bearings.
 Pneumatic bearing puller reduces the manual work.
 This type of machine reduces working time in removing bearings.
 By using this machine the bearings can be removed in the various lengths of shat (up to 600mm).
Principle Of Operation
 The pneumatic bearing puller is used to removing bearings in the shaft up to a length of 600mm. In the pneumatic bearing puller the main thing being the pressure developed is done with the help of a compressor.
 The air in that compressor is passed to the double acting cylinder through the control valves. There are two types of control valves used in this press. One is flow control valve and another one is the direction control valve.
 When the compressed air is passed to the flow control valve, the required speed of the piston is obtained by adjusting its knob. When the air is passed to the direction control valve, the up/downward movement of piston is controlled by the hand liver.
 The bearing shaft is connected to the top fixture. A bottom fixture is fixed on the bottom plate by using bolts and nuts.
Bearing Removing Procedure
 The shaft is kept vertically between the bottom fixture and top fixture. The bearing shaft is kept in the top of the fixture. The remaining portion of the shaft touches the bottom fixture.
 At the same time the compressor is loaded to get the pressure required and the hand operated valve is manually actuated from the neutral position to the input position to move the piston. The top fixture in the piston had inserted to its required position rod pushes the bearing which is placed on the shaft.
 When the bearing has removed to its original position, there will not be any further down ward movement. Then the valve is brought to the output position in which the air moves the piston upward and the shaft is removed.
 It reduces the manual work.
 It reduces the production time.
 Uniform application of the load gives perfect removing of the bearing.
 Damages to the bearing due to the hammering is prevented.
 It occupies less floor space.
 Less skilled operator is sufficient.
 Initial cost is high
 Cylinder stroke length is constant
 Need a separate compressor
 Bearing Pressing Operation in all industries
 Bearing Removing operation in all Industries
 Sheet metal bending in sheet metal industries
 Sheet metal bend removing in all industries
 Punching operation also done
 Riveting and metal forming also done with the help of separated male and female die.
to get seminar/project report and presentation about pneumatic bearing puller please visit below links , And further if you need any clarification about a specific details please reply there
i want seminar report and presentation about pneumatic bearing puller plz give me
i want seminar report and presentation about pneumatic bearing puller plz give me

To get full information or details of Pneumatic Bearing Puller please have a look on the pages

if you again feel trouble on Pneumatic Bearing Puller please reply in that page and ask specific fields in Pneumatic Bearing Puller

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: pneumatic bearing puller abstract, bearing puller ppt, hydraulic cylinder liner puller ppt, journal of hydraulic bearing puller, pneumatic bearing puller report, design and fabrication of sleeve puller wiki, pneumatic bearing puller,

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Electro-pneumatic Cancrusher seminar class 0 2,331 02-05-2011, 11:13 AM
Last Post: seminar class
  Bearing Capacity seminar class 0 1,775 16-02-2011, 11:27 AM
Last Post: seminar class

Forum Jump: