pelton wheel project report
#1

hi my name is kiran I would like to get report on pelton wheel
Reply
#2
The Pelton wheel is an impulse type water turbine. It was invented by Lester Allan Pelton in the 1870s. The Pelton wheel extracts energy from the impulse of moving water, as opposed to water's dead weight like the traditional overshot water wheel. Many variations of impulse turbines existed prior to Pelton's design, but they were less efficient than Pelton's design. Water leaving those wheels typically still had high speed, carrying away much of the dynamic energy brought to the wheels. Pelton's paddle geometry was designed so that when the rim ran at half the speed of the water jet, the water left the wheel with very little speed; thus his design extracted almost all of the water's impulse energy—which allowed for a very efficient turbine.
Reply
#3

The Pelton wheel is an impulse type water turbine. It was invented by Lester Allan Pelton in the 1870s. The Pelton wheel extracts energy from the impulse of moving water, as opposed to water's dead weight like the traditional overshot water wheel. Many variations of impulse turbines existed prior to Pelton's design, but they were less efficient than Pelton's design. Water leaving those wheels typically still had high speed, carrying away much of the dynamic energy brought to the wheels. Pelton's paddle geometry was designed so that when the rim ran at half the speed of the water jet, the water left the wheel with very little speed; thus his design extracted almost all of the water's impulse energy—which allowed for a very efficient turbine.Nozzles direct forceful, high-speed streams of water against a rotary series of spoon-shaped buckets, also known as impulse blades, which are mounted around the circumferential rim of a drive wheel—also called a runner (see photo, 'Old Pelton wheel..'). As the water jet impinges upon the contoured bucket-blades, the direction of water velocity is changed to follow the contours of the bucket. Water impulse energy exerts torque on the bucket-and-wheel system, spinning the wheel; the water stream itself does a "u-turn" and exits at the outer sides of the bucket, decelerated to a low velocity. In the process, the water jet's momentum is transferred to the wheel and thence to a turbine. Thus, "impulse" energy does work on the turbine. For maximum power and efficiency, the wheel and turbine system is designed such that the water jet velocity is twice the velocity of the rotating buckets. A very small percentage of the water jet's original kinetic energy will remain in the water, which causes the bucket to be emptied at the same rate it is filled, (see conservation of mass) and thereby allows the high-pressure input flow to continue uninterrupted and without waste of energy. Typically two buckets are mounted side-by-side on the wheel, which permits splitting the water jet into two equal streams (see photo). This balances the side-load forces on the wheel and helps to ensure smooth, efficient transfer of momentum of the fluid jet of water to the turbine wheel.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: literature review of pelton wheel in pdf, pelton wheel, pelton wheel turbine hindi me, pelton wheel turbine test rig pdf, pelton turbine mini project pdf, governing of pelton wheel methodology pdf, animated pelton wheel gif,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  project report 0 3,769 12-09-2020, 07:27 PM
Last Post:
  Multi purpose machine project report 0 2,103 20-02-2019, 10:23 AM
Last Post:
  civil engineering extensive survey project report 0 2,230 03-11-2018, 11:26 PM
Last Post: Guest
  beam engine mini project report file download 0 5,219 15-10-2018, 03:08 PM
Last Post: Guest
  beam engine mini project report file download pdf 0 10,884 14-10-2018, 09:03 PM
Last Post: Guest
  file encryption and decryption project report 0 2,080 06-10-2018, 12:02 PM
Last Post: Guest
  hydraulic jcb project report download 0 2,165 05-10-2018, 03:56 PM
Last Post: Guest
  crack detection in railway track using led ldr project report 0 8,601 04-10-2018, 06:19 PM
Last Post: Guest
  project report on battery level indicator pdf 0 1,891 25-09-2018, 05:50 PM
Last Post: Guest
  solar tracking system project report doc 0 1,987 25-09-2018, 10:51 AM
Last Post: Guest

Forum Jump: