26-04-2011, 02:24 PM
Presented By :
N.M.Shyam prasad
[attachment=12847]
INTRODUCTION :
In fact that a large percentage of electricity is being generated by using natural sources such as coal, gas etc. By the end of this century coal will be almost extinct.
Among the various options of Non conventional sources of energy the WAVE ENERGY is considered as the best option for the production of electricity.
PELAMIS WAVE POWER is the world’s first commercial scale machine to generate electricity in to the grid from offshore wave energy.
why wave energy?
To protect the environment for future generations.
To reduce the carbon emissions of greenhouse gases and consumption of limited resources.
wave energy is the one of the most environmentally nature friendly form of electricity generation.
Wave energy could play a major part in the world’s efforts to combat climate change.
It potentially displaces 1–2 billion tonnes of CO2 per annum from conventional fossil fuel generating sources.
Pelamis Wave Power
The Pelamis Wave Energy Converter is a semi-submerged, articulated structure composed of cylindrical sections linked by hinged joints.
The wave-induced motion of these joints is resisted by hydraulic rams, which pump high-pressure fluid through hydraulic motors via smoothing accumulators.
The hydraulic motors drive electrical generators to produce electricity.
PRODUCTION OF PELAMIS
Power module fabrication
Tube fabrication
Final assembly
POWER MODULE FABRICATION :
The power conversion modules contains the power capture systems.
The module consists of a fabricated and a painted steel structure that is installed with motor generator set, hydraulic Cylinders, Accumulators, and electrical control cabins.
TUBE FABRICATION :
The main structural fabrication consists of steel tubes, nose and yoke sections.
The nose section is installed with transformer, switch gear and control system and is commissioned.
Each tube is fitted with cabling and connecting transists to ensure the correct displacement.
FINAL ASSEMBLY :
The completed module and tube segments are joined together to complete the assembly of the machine.
These joints can be made both on the land and in the water depending upon facilities used.
The fully assembled machine undergoes commissioning at on-site installation.
CONSTRUCTIONAL DETAILS :
Each pelamis machine is of 140 mts long.
It has a diameter of 3.5 mts.
Each pelamis machine has three power conversion modules.
Each machine is rated to produce 750 KW.
Depending on the wave resource, machines will on average produce 25-40% of the full rated output over the course of a year.