ABSTRACT: Filling is the process in which a machine packs the liquid products such as water,
cool drinks etc. This method includes placing bottles onto a conveyor belt and filling bottles one
at a time. This aim of this paper is to describe the methods for filling more than one bottle at a
time. In a conveyor system, stepper motor is used for its efficiency. It includes the user defined
volume selection at the desired level. Our system includes less number of sensors, so it is less
expensive. Filling is controlled by PLC (Programmable Logic Controller) using ladder logic
method. In the bottle filling system the PLC gets the sensor feedback and controls the solenoid
valve timing as well as controls the conveyer belt. By programming the PLC, the entire system is
being controlled. Sensor stands as the most important part for bottle filling. Normally in all
automation industries, PLC is considered as the heart of any system. The entire system is made
more flexible, time saving and user friendly. Every result leads to the conclusion that the
operation of PLC in is very inspiring.




case study bottle filling system plc

This is final year project for Control Engineering students on "automatic bottle filing system using PLC and conveyor belt". For this project Omron CPM2A PLC is used, which act as heart of the system and is programmed using Ladder programming. During this project sensor has been used to detect the bottle position that move along the conveyor belt at the low speed while the machine operates. The input signal that has been sent from the sensor to the PLC has being made as a reference. Signal in order to determine the output signal that exactly a same with the PLC programming language based on the user requirement. You can also Subscribe to FINAL YEAR PROJECT'S by Email for more such projects and seminar.

Reference: http://studentbank.in/report-case-study-...z4Eqbvayk7