Can someone post the project report on  automatic handbrake release with pneumatic system

Abstract

Hand brake release for "ignition and clutch based system" is one of the time handling systems in automobile. Pneumatic cylinder operated one in the brake liver at the hands of this breaking system.

In this project, the control unit has received the signal from the key switch. The key switch is 'on' for the first time the clutch is applied so that for continuation of the breakdown of the solanoid valve and the pneumatic cylinder, there is activation in forwarding direction for 2 seconds (already in the wheel breaking condition). The key switch is 'off', the solanoid valve is off and the pneumatic cylinder activation applies in the direction of the reward for 2 seconds.

introduction:


We have enjoyed launching our new project "Hand brake release for ignition and clutch based system", which is fully equipped with automatic system. This is a real project that is fully equipped and designed for automobile vehicles. This is an integral part of the best quality. This product has rigorously tested our automobile vehicles and it is good.

working principle:

Automatic hand break release for passenger car system works by main air brake pressure lines and a pressure switch is provided.

In turn, this pressure switch activates the mechanical connection of another mechanism, a piston or other mechanical type, which is then the main air brake system in every hand through the pressure sensor valve, since the break lever release release release release release of handbrake, Therefore all manual handbrakes are issued on the train.