mtech ams seminars topics
#1

wanted a topic for seminar on AMS ( Advanced Manufacturing Systems)
Reply
#2

1. Drop test analysis of industrial helmet used for Mining Industrial standards
2. Shape optimization of a two wheeler suspension for pipe type and rectangular cross sections
3. Design evaluation and optimization of a nozzle used in diesel engine
4. Design evaluation of medical wheel chair.
5. Design evaluation of a ceiling fan blade for Rolax company
6. CFD analysis of a blower outer casing.
7. Coupled field analysis of a chimney used in cement industry
8. Stress analysis of functionally graded discs under mechanical and thermal loads
9. Effect of tool feed rate in single point diamond turning of Aluminum 6061 alloy.
10. Composite material analysis of a driven shaft for variable speeds
11. Design, modeling and manufacturing of a heat treatment tray for 7mmdia and 30mm height nozzle.
12. Transient thermal analysis of a Diesel Engine Out let Bi metal valve for open and closed conditions.
13. Contact analysis of a cam and follower in two wheeler.
14. Design of connecting rod of internal combustion Engine by a Topology optimization approach.
15. Tool life performances, wear mechanisms and surface roughness characteristics when milling austenised and quenched bearing steel with ceramic and H.S.S cutting tool.
16. Stress analysis of overarm or ram used in milling machine
17. Design optimization of a two wheeler suspension frame by E-glass Epoxy and Aluminum MMC
18. Drop simulation and material optimization of USB flash drive
19. Mono Composite leaf Spring for light Weight Vehicle-Design
20. Influence of cutting parameters on thrust force and torque in drilling of Mild steel, Aluminum 7475 by using HSS drill bit
21. Influence of cutting parameters on thrust force and torque in milling of EN 26 and H.D.S
22. Tool life performances, wear mechanisms and surface roughness characteristics when turning austenised and quenched bearing steel with ceramics and HSS(M30)
23. Modeling and analysis of connecting rod of four stroke single cylinder engine for optimization of cost & material
24. Profile modification and Validation of spur gear to increase the tooth strength
25. Analysis of Effect of clearance between the blades in shearing operations.
26. Stress analysis and design failure rectification of a connecting rod by FEA
27. Design evaluation of a heavy vehicle chassis by using materials E- Glass Epoxy & S-2 Glass Epoxy.
28. Connecting Rod Optimization for Weight and Cost Reduction
29. Structural Analysis of milling bed due to cutting forces
30. Optimization of a material flow time for plastic component by design evaluation
31. Fatigue analysis of diesel engine connecting rod using metal aluminum matrix reinforced with boron carbide.
32. Structural Analysis of column used in shaping machine.
33. Design optimization of the 150cc engine valve by Ti MMC.
34. Non linear dynamic analysis of crankshaft used in two wheeler
35. Design and Material optimization of cam shaft in 150cc engine
36. Design & validation of 220cc oil cooled engine cylinder head by LM12, LM13, LM14.
37. Design and Analysis of cylinder and Cylinder head of 4-Stroke SI Engine for weight reduction.
38. Design validation and buckling analysis of the MAG wheel for straight and slant spokes
39. Analysis of spindle in milling machine
40. Stress analysis and reducing stress of connecting rod of Nissan SUNNY Engine by the Finite Element Method
41. Analysis of drilling bed due to torque and thrust
42. Design & load calculations for auditorium & duct design for central air conditioning
43. Design evaluation of a material handling crane channel assembly used in workshop
44. Impact analysis on a frameless chassis construction of mini bus for variable speeds
45. Design evaluation of a heavy vehicle chassis for composite materials IM 7 Fiber & 997 Epoxy for optimum load conditions
46. Design evaluation of a two wheeler suspension system for variable load conditions
47. Design and material optimization of two wheeler rocker arm
48. Design validation of 220cc oil cooled engine cylinder head
49. Analysis of column used in drilling machines subjected to axial forces
50. Optimization of high speed turning parameters of Super alloy Inconel 718 material using Taguchi technique
51. Parametric Design & Design validation of support Structure for 25ton Crane used in moulding industry
52. Fatigue analysis of crankshaft in two wheeler for the material nickel chromium steel.
53. Assembly analysis of a gear train of a gear box
54. Process and die design for square tube extrusion
55. Analysis of arbor holding the cutting tool in a milling machine
56. Non linear analysis of diesel engine connecting rod
57. Analysis of column due to cutting forces in milling machine
58. Thermo – Mechanical stresses in Twin – Roll Casting of Aluminum Alloys
59. Analysis of center lathe headstock side due to tangential force, feed force and thrust force
60. Analysis of spindle due to torque and thrust during drilling
61. Analysis of bed used in shaping machine
62. Non linear Structural analysis of two wheeler piston
63. Design evaluation of two wheeler piston using aluminum metal matrix composite (MMC)
64. Failure analysis on diesel engine connecting rod due to repeated stresses
65. Effect of Impacting on tier and MAG wheel of a two wheeler for the moderate speeds
66. Buckling analysis of crankshaft used in two wheeler for maximum load conditions
67. Assembly analysis of crank, connecting rod, piston
68. Design evaluation of a two wheeler out let valve for 180cc engine
69. Analysis of center lathe tailstock side due to tangential force, feed force and thrust force
70. Analysis of radial arm used in drilling machines
71. Transient and thermal analysis of an exhaust manifold
72. Fatigue analysis of a multi plate clutch
73. Mechanical analysis of deformation of tube drawing process
74. Analysis and part life estimation of a foot rest
75. Fatigue analysis of Diesel engine piston by using composite aluminum metal matrix composite. (MMC)
76. Analysis of centre lathe bed due to forces received through head stock, tail stock and saddle
77. Design and optimization of a punching machine fly wheel
78. Thermo – mechanical Coupled Simulation for Hot Continuous Rolling of Large – Diameter Mandrel Bar
79. Design evaluation of a four cylinder petrol engine crank shaft using materials manganese steel and Aluminum matrix reinforced with boron carbide
80. Design evaluation of a camshaft used in multi cylinder engine using materials forged steel and Aluminum alloy
81. Assembly analysis of a single plate clutch
82. Analysis of ram used in shaping machine due to friction forces
83. Strengthening car bumper in load bearing direction by using material Carbon fiber-reinforced polymer IM7
84. Buckling analysis of an inlet & outlet valve of a 800cc car
85. Design & analysis of support hinge for 25ton Crane
86. Design Evaluation of flywheel used in petrol engine car for variable torque load
87. Fatigue analysis of a roller bearing used in two wheeler wheel
88. Design and analysis of spur gear used in a reciprocating compressor
89. Impact test on motorcycle helmet for different angles of impact using FEA
90. Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminum alloy
91. Implicit finite element study of non – steady effects in cold roll forming
92. Non-Linear Finite Element Method Simulation and Modeling of the Cold and Hot Rolling Processes
93. Design and analysis of multi layer pressure vessel
94. Deformation analysis of extrusion of billets determined by the conditions of lubrication
95. Mechanical analysis of dies used in closed die forging to reduce defects
96. Elasto Plastic Deformation Process of Cold Rolling
97. Aero Thermodynamic Analysis and Design of a Rolling Piston Engine
98. Design of a car air conditioning system based on an absorption refrigeration cycle using energy from exhaust gas of an internal combustion engine
99. Plate-Fin-And-Tube Condenser Performance and Design for
100. Air-Conditioner
101. Flexible Control of Single Link arm using Neural Fuzzy Neuro Fuzzy
102. Dynamic Analysis of Flexible Single page link probotic arm Considering joint Stiffness
103. Fuzzy logic and Neural networks based control of single page link flexible Manipulator
104. Kinematic analysis of a three degrees of freedom parallel Manipulator
105. Analysis for a planar two page link flexible arm
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: ams 02 antimatter, what is fea, buckling, fea of spurgearppt, duncan aluminum, ams realtime projects, ams college of engineering namakkal,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  evs project topics for 12th standard in marathi 2 4,957 10-12-2018, 08:33 PM
Last Post:
  list of seminar topics in botany 0 6,481 06-11-2018, 04:25 PM
Last Post: Guest
  seminar topics on hydrobiology 0 5,923 19-10-2018, 02:02 PM
Last Post: Guest
  m phil commerce project topics 0 863 17-10-2018, 04:37 PM
Last Post: Guest
  bsc final year projects topics zoology as field work 2 1,982 07-10-2018, 11:07 PM
Last Post: Guest
  seminar topics in agronomy 0 608 27-09-2018, 01:22 PM
Last Post: Guest
  oc project for 12th topics 0 559 25-09-2018, 04:43 PM
Last Post: Guest
  dumb charades bible topics 0 838 20-09-2018, 05:56 PM
Last Post: Guest
  seminar topics of zoology 0 718 18-09-2018, 09:02 PM
Last Post: Guest
  list of seminar topics in botany 0 1,250 18-08-2018, 04:01 PM
Last Post: Guest

Forum Jump: