microprocessor 8086 programming interfacing nagoor kani pdf
#1

tomorrow is my xam m in need of microprocessor book. i heard microprocessor nd controller by nagoorkanni for 8086 is the best
Reply
#2

THEORY:-

The stepper motor is a device used to obtain precise control of the position of the rotary shafts. A stepping motor uses the rotation of its axis in terms of steps, instead of a continuous rotation as in the case of an alternating current motor or continuous. To rotate the motor shaft step by step, a sequence of pulses is required to be applied to the motor windings step by step, in proper sequence. The numbers of pulses required for complete rotation of the motor shaft are the same as the number of internal teeth in its rotor. The stator teeth and rotor teeth are locked together to secure a shaft position. With a pulse applied to the input of the winding, the rotor rotates by a position of the teeth or an angle x. the angle x can be calculated as.
x = 3600 / no. of the rotor teeth
After rotation of the shaft by angle x, the rotor is locked with the next tooth in the sequence on the inner surface of the stator. The typical scheme of a typical stepper motor with four windings is as shown below.

[Image: stepper.PNG]

Stepper motors are designed to work with digital circuits. Binary level 0-5V pulses are required at their winding inputs to obtain rotation of the shafts. The sequence of the pulses can be decided, depending on the required movement of the shaft. By means of a suitable sequence of pulses, the motor can be used in three modes of operation.

• One phase ON (average torque)
• Two phases ON (high torque)
• Too much (under par)

[Image: stepper.PNG]

WORKING:-

8255 is interconnected with 8086 on the mapped I / O. the C port (PC0, PC1, PC2, PC3) is used to give pulse sequence to the stepper motor. The 8255 provides a much lower current that will not be able to drive the motor coils step by step so that each winding of a stepper motor needs to be connected using high speed Darlington transistors with a maximum rating of 1A, 80V with heat sink with output port 8255. Pull out the sequence in the correct order to have the desired direction to rotate the motor.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: interfacing of lcd with 8085 microprocessor programming with description pdf, led interfacing with 8086, assembler directives 8086 microprocessor pdf, 8086 interfacing with 7 segment display pdf, nagoor kani microprocessor pdf, 8086 system interfacing ppt, interfacing lcd with 8086 ppt,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Lm35 Temperature Sensor using Microprocessor 8086 0 766 23-06-2021, 02:59 PM
Last Post:
  nagoor kani microprocessor 8085 download 0 651 20-10-2018, 11:05 AM
Last Post: Guest
  traffic light control system using 8086 code 0 830 12-07-2018, 09:46 AM
Last Post: Guest
  4th sem cse microprocessor aradhya tutorial notes 0 674 30-06-2018, 11:57 AM
Last Post: Guest
  8085 or 8086 vhdl code pdf 0 540 23-05-2018, 08:59 PM
Last Post: Guest
  microprocessor based lift overload preventer project ppt 0 529 14-05-2018, 05:21 PM
Last Post: Guest
  cnc programming in hindi pdf 0 645 14-05-2018, 01:37 PM
Last Post: Guest
  voting machine using 8085 microprocessor programs 0 583 08-05-2018, 01:39 PM
Last Post: Guest
  arun kumar notes 6th sem microprocessor 1 660 21-04-2018, 09:30 AM
Last Post: Guest
  control systems book by nagoor kani free download 0 450 16-04-2018, 07:56 PM
Last Post: Guest

Forum Jump: