fabrication of hydraulic machine vice ppt
#1

Fabrication of hydraulic machine vice ppt
Reply
#2

The maintenance and release work is the most essential act to carry out the machining to keep the work in the correct position. To release the job quickly and keep the job rigidly. To avoid vibration of the work while performing the machining We are using mechanical devices of work clamping. In this project we are dealing with the pneumatic rod used in the drilling machine. In the pneumatic type one end of the piston rod is connected to the movable jaw and the piston slides in the cylinder. Here the air drives the movement of the piston, this in turn drives the movable jaw. Here the main movement is only an alternative movement.

The tire is that branch of technology, which deals with the study and application of the use of pressurized air to affect the mechanical movement. "Pneumos" stands for "Air" and "Tics" means "Technology Pneumatics is using air to push or pull things or suck them. Pistons and tubes are light and powerful, lighter than equivalent engines, however, the compressor is In itself an engine and is heavy.The air compressor keeps the air storage tanks filled and the storage tanks provide the reserve air to quickly fill the actuators or pistons Storage tanks are at least twice the pressure of The actuators, so that a storage air tank will quickly fill an actuator of the same size, but after that the air compressor can not replenish the used air very quickly. It adds about half a cubic foot of air per minute, depending on the Pressure already in the system which is striving to put more air in. Less air is moved near full pressure (.24cfm) and more to zero pressure (.79cfm), so in a whole 2-minute party wait The air compressor adds ~ .8 cubic feet of air. Plan a test while observing the main high pressure gauge to see how low it is during what you expect to be a normal operation.


Related video is here :

Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: hydraulic machine vice ppt,
Popular Searches: fabrication of tilting vice pdf, project about hydraulic vice, 2d diagram of machine vice, hydraulic vice design, fabrication of hydraulic vice, synopsis for pnematic vice, design for hydraulic vice,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  seminar report on 3d solar cells ppt paper presentation ppt seminars report on 3d solar cells ppt paper presentation ppt 5 43,145 15-04-2018, 08:39 AM
Last Post: Guest
  design and fabrication of welding slag cleaning machine 4 9,131 17-03-2018, 02:58 PM
Last Post: Guest
  hydraulic cylinder liner puller ppt johnmercy 3 2,350 15-03-2018, 04:32 PM
Last Post: sudhajini
  floor cleaning machine mini project report 1 2,118 11-03-2018, 05:55 PM
Last Post: Guest
Rainbow mini project on hydraulic punching machine 1 1,296 02-10-2017, 12:57 AM
Last Post: Ladhava Jayesh
  hydraulic crane project synopsis pdf 4 4,902 22-09-2017, 08:55 PM
Last Post: hudsong2
  automatic paper cutting machine by using geneva mechanism working 2 6,938 14-08-2017, 01:09 PM
Last Post: Guest
  bhel haridwar fabrication block 2 ppt 3 2,612 15-07-2017, 04:16 PM
Last Post: jaseela123d
  mini hydraulic press ppt 2 1,384 22-04-2017, 01:31 AM
Last Post: Guest
Wink mechanical multi operation machine project pdf 4 1,649 20-04-2017, 09:08 AM
Last Post: jaseela123d

Forum Jump: