18-02-2015, 03:19 AM
What equation would I use to find the indexing time and processing time of a geneva mechanism given the RPM and number of slots?
|
methods of disuniting of structures in prefabricated structures
|
What equation would I use to find the indexing time and processing time of a geneva mechanism given the RPM and number of slots?
25-03-2017, 04:12 PM
Prefabrication is the method of construction that includes assembling components of a structure at a manufacturing or production site, transporting complete assemblies or partial assemblies. To the place where the structure is to be located. It is a combination of good design with modern high-performance components and quality-controlled manufacturing processes. This work is done in two stages, the manufacture of components in a place other than the final location and its erection in position.
Prefabricated sections are produced in large quantities in a factory and then shipped to various construction sites. This procedure can allow the work to continue despite bad weather conditions and should reduce any wastage of time and material on the site. Prefabricated concrete units are cast and hardened before being used for construction. Sometimes, builders throw components at the construction site and place them in place after they harden. This technique allows the rapid construction of structures.
Prefabrication
Prefabrication as defined will be carried out in two stages
1. Manufacture in factory conditions and assembly of
2. Components in the required location.
Prefabricated sections are produced in large quantities in a factory and then shipped to various construction sites. This procedure can allow the work to continue despite bad weather conditions and should reduce any wastage of time and material on the site. Prefabricated concrete units are cast and hardened before being used for construction. Sometimes, builders throw components at the construction site and place them in place after they harden. This technique allows the rapid construction of structures.
Prefabrication
Prefabrication as defined will be carried out in two stages
1. Manufacture in factory conditions and assembly of
2. Components in the required location.
|
« Next Oldest | Next Newest »
|
