mechanical engineering research topics and papers
#1

1. Manufacturing Optimisation + Quality Improvement for Small Orifice Manufacture in Engine Components
2. Effect of Vibration in Cancer Cells -
3. Optimum Tool Paths for Two and Half Milled Components
4. Investigation of lubrication and wear in engines using acoustic emission
5. Moulding of a fan blade composite material using various manufacturing processes
6. A Study of the Thermal Error in Turning Due to Cutting Tool Expansion
7. Transport of Non-physical Variables for Multiphase-change & Solidification Modelling
8. The Effect of Particulate Geometry and Quality on Direct Laser Deposition
9. Development of Smart Cloth
10. Investigation of Osteoporosis in the Biomechanical Performance of the Dynamic Distraction Frame
11. Design Analysis & Synthesis of a Non-conventional Parallel Manipulator with Innovative Joints
12. Statistical process control of thermal spray coatings using acoustic emission
13. An Investigation of Heat Partition in High Speed Machining Using Uncoated and Coated Tools
14. Laser Cutting of Carbon Fibre Composite Materials
15. Modelling Of Laser Cutting Striation Formation
16. Carbon Dioxide Storage
17. Physics-based modelling for analysis and diagnostics
18. The Design and Evaluation of Variable Fuel-Placement Airblast Atomizers
19. Development of a New, Multiple Pulsed Percussion Laser Drilling Mathematical Model
20. Improved Modelling of Fires
21. Dynamic Behaviour of Cellular Solids
22. Spray Modelling Without Droplet Size Segregation
23. Laser Cleaning of Micro-Slots and Cracks
24. Fabrication of Cu-H13 Tool Steel Parts Using Selective Laser Melting (SLM) Technique
25. Single Molecule Detection using Micro and Nano Systems
26. Reliability of an Utility Plant
27. Crashworthiness of Sandwich Panels
28. Creep Lifetime Predictions of Welded Structures Using Parallel Processing Algorithms
29. Residual Stresses Induced with Thermal Spraying
30. Thermal Transport Modelling of Woven Ceramic Matrix Composites
31. A Study of Electro-Discharge Drilling using gas dieiectrics
32. A Novel Model to Aid Femoral Derotational Osteotomy Surgery
33. Finite Element Analysis of Cutting Tool Boundary Effects in Dry High Speed Machining
34. Dynamics of Long Rod Penetration
35. A Methodology for Modelling Fluid-Structure Interaction Applied to Turbine Fan Blades
36. Photodynamic Therapy on Keloids
37. An Investigation into the Use of the Ilizarov Frame for the Correction of congenital Talipes Equinovarus (clubfoot)
38. High Speed Fibre Laser Cutting and Machining
39. Laser Surface Texturing and Coating of Ti-6Al-4V for Improving Biocompatibility
40. Foam-Filled Corrugated Board Manufacture
41. Experimental & Finite Element Modelling of High Speed Machining Process: Establishing Integrity of Model Inputs
42. Numerical Simulation of Laser Direct Metal Deposition Flow Processes
43. An Extendible Computer-Aided Process Planning System for Turn - Milled Components
44. The Effect of the Skin Tension on the Formation of Keloid Scars - PhD Student - Edna Suarez Pozos
45. Modelling of Mass Addition for Laser Direct Deposition
46. Simulation of Human Model - PhD Student
47. Force Modelling in High Speed Ball End Milling
48. In-Process Electrochemical Discharge Dressing of Metal-Bonded Diamond Grinding Wheels
49. Photovoltaics and Solar Energy: Renewable-energy Powered Desalination Systems
50. Mechanical Behaviour of Rubber Toughened Polymers over a Wide Range Of Strain Rate and Temperature
51. Spray Modelling
52. The Effects of Rayleigh Waves on Improving the Surface Finish of Castings
53. Integrated Information Systems to Support Quality Management
54. The Influence of the Osteoporosis in The Mechanical Behavior of Hip Replacements
55. Fast Track Design and Reliability of Total Care Systems
56. Design of a 5-axis micromachining centre
57. Optical Engineering
58. Statistical Experimental Analysis of a Two-Fluid Sprayer and Its Use to Develop the Number Size Distribution Moments Model of Sprays
59. Surfaces, Materials and Monitoring
60. Size Effect in Micro-Mechanical Machining -
61. Nanocomposite material and coating design for micro-sensor and microacturator applications
62. Modelling & Failure Analysis of Ferritic Steel Used in Pressure Vessels & Piping Applications
63. Performance Improvement of MEMs Sensor in Vibration Based Diagnosis
64. Inspection of Micro-Scale Components Using Reverse Engineering Techniques
65. The Use of Parameter Identification Methods for the Condition Monitoring of Electric Motor Drives
66. Crack-Free Laser Cutting of Thick-Section Ceramic Materials
67. Optimisation of Low Concentrating Line-axis Dielectric Photovoltaic Concentrator
68. Structural Heath Monitoring
69. Stratified Multi-Phase Flow Behaviour in Vertical and Horizontal Pipes
70. Design, Manufacture and Robotics
71. Design & Manufacture of Electromagnetically Unobtrusive Composite Radome Structures
72. New Materials and Processes for Micro- and Nano-Devices
73. Turbulence Modelling for Free-Surface and Costal Flow Simulations
74. A Study of Intelligent Pulsating Blankholder Technology for Deep Drawing
75. The Computation Three-Dimensional, Time-Dependent Flows in Rotating Cavities, using High-Reynolds-number Models of Turbulence
76. BioMEMS for Cell Studies
77. Optimisation of Laser Forming Process for Tube/Sheet Bending
78. Modular Design Principles for Bespoke Mechatronic Control Systems
79. The Laser Cleaning of Aerospace Titanium Alloys for Joining
80. An Efficient Solution for Scheduling Preventive Maintenance Tasks of Cogeneration Plants Using Integer Programming and Simulation
81. Fibre Laser Cutting of Stents
82. Laser Cutting of Material of Non-Uniform Thickness
83. Modelling and Analysis of Melt Pool Effects in Laser Cladding
84. Effect of Non-Conventional Beam Geometry in Laser Processing of Engineering Materials
85. Modelling Surface Waves Using The Hypersingular Boundary Element Method
86. Reliability and Maintainability of High Speed Packaging
87. Compressor fault detection and management
88. Combined Wire and Powder Deposition in Direct Laser Metal Additive Manufacturing
89. Microfluidic lab-on-chip device based on acoustic wave technology
90. Oscillating vapour bubbles and heat transfer
91. Mode Transformation in Carbon Nanotubes
92. Vibration Diagnosis of Blades of Rotating Machines
93. Laser Drilling Of Cooling Holes for Aeroengine Components
94. Breast Implant Surface Development
95. Design Optimisation & Health Monitoring Techniques for Composite Structures
96. Thermoacoustic Technologies for Energy and Building
97. Heat transfer in magnetic liquids
98. An Investigation of Tool Chip Contact Length and Phenomena in High Speed Turning Using Uncoated and Coated Tools
99. The Modeling and Practice of Multiple Track Laser Direct Metal Deposition (LDMD) -
100. Three-Dimensional Imaging for Atomisation & Sprays
101. Combined Laser and Mechanical Micro-Drilling of Nickel-Base Super-Alloy
102. Micro Milling of Hardened Tool Steel: Process Fundamentals & Extended Life Tool Coatings
103. Manufacture of Advanced Carbon Fibre Composites by Resin Transfer Moulding of Preforms
104. Speed Based Fault Detection for Large Diesel Engine Applications
105. Energy Technology, Heat Transfer and Fluid Mechanics
106. Local Impact Effects of Hard Projectiles on Concrete Targets
107. Large Eddy Simulation of Buoyant Flows
108. Renewable Energy
109. BioMEMS and Nanotechnology
110. Microdeivces based on shape memory alloys and polymers for biological applications
111. Modelling of Cutting Forces in High Speed Ball-end Milling
112. Development of Smart Ankle-Foot-Orthosis
113. Electrical Dressing of Grinding Wheels
114. Investigation on the Mechanisms of the Strain Growth Phenomenon in Containment Vessels Subjected to Internal Blast Loading
Reply
#2

I really like your forum here. So I decided to be a part of it :)

And here I am saying HELLO EVERYBODY!! :D
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: ieee papers topics on ecommerce, sychology research topics, papers onultracane, karmosongstan papers, research paper on mechanical engineering free pdf download, physics research topics, research topics of the,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  mechanical engineering phd research ideas project topics 2 5,141 27-05-2016, 12:45 PM
Last Post: dhanabhagya
  Research on Computer Science? shakir_ali 1 3,238 30-10-2014, 07:45 PM
Last Post: seminar report asees
  research topics on psychology computer science crazy 7 14,893 24-07-2013, 12:33 PM
Last Post: Guest
  Mechanical project suggestions in Cement industry Hapz 0 2,838 25-03-2013, 10:20 PM
Last Post: Hapz
  How to Write a Research Proposal project topics 0 2,760 24-10-2011, 11:04 AM
Last Post: project topics
  mechanical engineering phd thesis topics project topics 1 7,509 31-05-2011, 12:11 PM
Last Post: anandyjoshi
  research topics in computer science and engineering project topics 1 6,792 26-02-2011, 11:38 PM
Last Post: sunitha_dodda
  research topics on climate change computer science crazy 2 3,822 16-02-2011, 11:20 AM
Last Post: johnpeter
  research topics in computer science project topics 1 4,443 16-02-2011, 11:09 AM
Last Post: johnpeter
  psychology research paper and titles computer science crazy 0 3,769 09-11-2010, 06:58 PM
Last Post: computer science crazy

Forum Jump: