1. MOTORISED OBJECT LIFTING JACK
2. KEY CONTROLLED- FORK LIFTER:
3. MATERIAL HANDLING (X, Y, Z MOTION CONTROL):
4. STEPPER MOTOR CONTROL WITH SELECTED STEPS FOR CONVEYOR BELT:
5. OBJECT REJECTION & COUNTING MACHINE:
6. ROBOTIC ARM WITH GRIPPER:
7. PNEUMATIC/HYDRAULIC ROBO ARM:
8. PNEUMATIC/HYDRAULIC CRANE:
9. PNEUMATIC/HYDRAULIC JACK:
10. ROBOTIC CRANE :
11. ROBOTIC TROLLEY FOR MATERIAL HANDLING:
12. AUTOMATIC STAMPING AND SORTING MACHINE FOR POST CARD:
13. WIND MILL:
14. SOLAR SUN SEEKER:
15. THERMAL POWER PLANT USING STEAM:
16. HYDEL POWER DAM:
17. ELECTRICAL ENERGY FROM AMUSEMENT PARK RIDES (SEA-SAW, SWING, SLIDE, ROLLER ETC.)
18. ELECTRICAL ENERGY FROM SPEED BREAKER:
19. PADDLE CONTROLLED MOBILE CHARGER [censored] EMERGENCY LIGHT:
20. HYBRID CHIMNEY
21. SOLAR POWERED REFRIGERATOR:
22. ELECTRICAL ENERGY FROM COMPRESSED AIR-
23. ELECTRICITY FROM D.J. DANCE FLOOR:
24. WIND BELT:
25. ROBOTIC CAR WITH SENSORS:
26. JOY STICK CONTROLLED ROBOTIC CRANE WITH UP/DOWN PULLEY ARRANGEMENT AND CIRCULAR MOTION:
27. LINE TRACER INDUSTRIAL VEHICLE:
28. ROBOTIC RADAR SYSTEM:
29. ROBOTIC FIRE BRIGADE TROLLEY:
30. ROBOTIC LIFT/ ESCALATOR:
31. PC BASED IC-INTERNAL COMBUSTION ENGINE:
32. PC BASED SEWER LINE CLEANING ROBOT:
33. PC BASED ROBOTIC TROLLEY:
34. PC BASED LIFT/ELEVATOR CONTROLLER:
35. PC BASED DISTANCE MEASUREMENT ROBOT:
36. PC BASED LATH MACHINE CONTROL:
37. PC BASED AUTO BRAKING SYSTEM:
38. PC BASED FORK LIFTER:
39. PC BASED EARTHQUAKE PROOF BUILDING:
40. LOCOMOTIVE COACH CLEANER:
41. EXERCISE/PSYCHOTHERAPY MACHINES:
42. GAS BURNER TYPE WATER HEATER:
43. COMPRESSOR LESS THERMO-EMF REFRIGERATOR:
44. DEEP FREEZER USING COMPRESSOR:
45. COOLING TOWER:
46. COMPRESSOR BASED SPRAY GUN:
47. PAPER SHREDDING MACHINE:
48. SUN BLIND CONTROL:
49. HEAT EXCHANGER-PIPES:
50. DOOR OPENER:
51. MOVING BRIDGE:
52. CURTAIN MOVER:
53. EARTH MOVERS:
54. TOFFEE/PACKET VENDING MACHINE:
55. SOLENOID BASED HAMMER:
56. TORQUE TESTING DEVICE:
57. LIQUID DISPENSER MACHINE (WITH AIR CONTROL SYSTEM):
58. AIR COMPRESSED SPRAY GUN (WITH ELECTRIC AIR PUMP):
59. LATHE TOOL PRESSURE DYNAMOMETER:
60. SOLENOID BASED DRILLING /PUNCHING MACHINE WITH AUTOMATIC TIMER BASED/IR SENSOR:
61. SUN TRACKING WATER HEATER WITH MECH. PROCESS (WATER DROP ETC.)
62. DRINKING WATER FROM OCEAN WATER:
63. TEST-TUBE VIBRATING MACHINE WITH DUAL CONTROL-
64. AUTOMATIC VENTILATOR FOR WINDOWS PANELS:
65. LATH MACHINE CONTROLLER:
66. AC COIL CLEANING SYSTEM
67. MOTORIZED WHEEL CHAIR:
68. ENGINE BASED GENERATOR
69. PADDLE CONTROLLED DOOR OPENING SYSTEM:
70. ACCIDENTAL PROOF TRAINS USING RF SIGNALS
71. HEART BEAT PULSE PLOTTER MACHINE
72. LAPPING MACHINE:
73. MAGNETIC LEVITATION PLATFORM:
74. MOVING ESCALATORS:
75. AUTOMATIC MOPPING MACHINE:
76. AUTOMATIC MILLING MACHINE:
77. PCB FABRICATION:
78. UNMANNED RAILWAY CROSSING
79. ANALYSIS OF RECTANGULAR /TRIANGULAR FINS IN HEAT EXCHANGE MACHANISM:
80. MOTORIZED ELECTRIC AIR COMPRESSOR:
81. ENGINE BASED AIR COMPRESSOR:
82. 360 MOTION AIR FLOW COOLER WITH DUAL SIDE AIR FLOW:
83. TEST-TUBE VIBRATING MACHINE WITH DUAL CONTROL-
84. AUTOMATIC VENTILATOR FOR WINDOWS PANELS:
85. LATH MACHINE CONTROLLER:
86. AC COIL CLEANING SYSTEM
87. MOTORIZED WHEEL CHAIR:
88. ENGINE BASED GENERATOR
89. PADDLE CONTROLLED DOOR OPENING SYSTEM:
90. ACCIDENTAL PROOF TRAINS USING RF SIGNALS
91. HEART BEAT PULSE PLOTTER MACHINE
92. LAPPING MACHINE:
93. MAGNETIC LEVITATION PLATFORM:
94. MOVING ESCALATORS:
95. AUTOMATIC MOPPING MACHINE:
96. AUTOMATIC MILLING MACHINE:
97. PCB FABRICATION:
98. UNMANNED RAILWAY CROSSING
99. REGENERATIVE BRAKING SYSTEM:
100. PC/MECHANICAL BASED TIME OPERATED FOIL BENDING / DONA MAKING MACHINE:
101. PC BASED 3D XYZ AXIS MOTOR (MATRIX) CONTROL:
102. PC BASED SCREW/DRILL SYSTEM:
103. PC BASED HEIGHT MEASUREMENT TOOL:
104. PC BASED STICKER/PAPER CUTTING MACHINE:
105. PC BASED THREAD/COIL WINDING MACHINE:
106. PC BASED CONTINUOUS WELDING VEHICLE:
107. PC BASED DIE CUTTING:
108. PC BASED HELICOPTER CONTROL:
109. PC BASED JOINT ASSEMBLY PROJECT:
110. PC BASED AUTO PACKET VENDING MACHINE:
111. PC BASED ROBOTIC SWEEPER:
112. PC BASED ATM MACHINE:
113. PC BASED PROGRAMMABLE PAINT MACHINE:
114. PC BASED CAR PARKING MONITOR:
115. INDUCTION BRAKING:
116. ANTI LOCK SENSOTRONIC BRAKING SYSTEM:
117. PROPELLER BASED FORMULA CAR:
118. DIESEL ENGINE BASED CLUTCH CONTROLLED CAR:
119. DIESEL ENGINE LOCOMOTIVE MODEL:
120. PROPELLER/MOTORIZED MONO RAIL:
121. PNEUMATIC TRANSPORT SYSTEM:
122. HYDRAULIC BRAKES:
123. HYBRID CAR “ ENGINE AND DC MOTOR OPERATED DUAL POWER CAR:
124. WIRELESS TYRE PRESSURE GAUGE:
125. DRIVER LESS CAR:
126. REGENERATIVE BRAKING SYSTEM:
127. INDUCTION BRAKING:
128. ANTI LOCK SENSOTRONIC BRAKING SYSTEM:
129. PROPELLER BASED FORMULA CAR:
130. DIESEL ENGINE BASED CLUTCH CONTROLLED CAR:
131. DIESEL ENGINE LOCOMOTIVE MODEL:
132. PROPELLER/MOTORISED MONO RAIL:
133. PNEUMATIC TRANSPORT SYSTEM:
134. HYDRAULIC BRAKES:
135. HYBRID CAR “ ENGINE AND DC MOTOR OPERATED DUAL POWER CAR:
136. WIRELESS TYRE PRESSURE GAUGE:
137. DRIVER LESS CAR:
138. MICROCONTROLLER AT-89C51 BASED AUTO GEAR SHIFTING SYSTEM:
139. MICRO CONTROLLER AT-89C51 BASED AUTO SPEED LIMITER WITH AUTO BREAKING:
140. DIGITAL AUTO SPEED LIMITER: For limit the speed suto.. if a school or hospital comes in way.
141. ELECTROMECHANICAL BRAKE
142. SOLAR TRICYCLE FOR KIDS:
143. SOLAR TOY CAR:
144. COLLAPSIBLE STEERING MACHANISM:
145. HYBRID MOTORBIKE:
146. FOUR WHEEL STEERING SYSTEM:
147. CONTINUOUS VARIABLE TRANSMISSION:
148. ELECTROMAGNETIC BRAKE USING BRAKE SHOE:
149. DISC OR CLUTCH BRAKE SYSTEM IN AUTOMOBILES

---

MOTORISED OBJECT LIFTING JACK : The object lifting Jack works with the help
of geared motors and worm gear arrangement to lift the objects. The modified version
can even lift car using the same principle.
KEY CONTROLLED- FORK LIFTER: - This Fork lifter lift the floor items and
place at the required space as instructed by Key controls.
MATERIAL HANDLING (X, Y, Z MOTION CONTROL): - A switch controlled
material handling mechanical assembly that can pick or place the goods in all three axis
using three gear motors.
STEPPER MOTOR CONTROL WITH SELECTED STEPS FOR CONVEYOR
BELT: -An automatic system that moves the stepper motor for bottle vending /material
dispenser control system.
OBJECT REJECTION & COUNTING MACHINE: - A conveyor belt based project
that carries goods of different height or material. The object rejection setup removes the
item from the moving belt if it does not fulfill the condition.
ROBOTIC ARM WITH GRIPPER: - A three-geared motor setup of robotic arm is an
interesting project under material handling. Six keys operation controls the whole setup
of the model.
NEUMATIC/HYDRAULIC ROBO ARM: The air pressure is the base behind this to
move the arm to grip, to lift and to rotate the material to handle. A mini compressor will
create the air pressure.
NEUMATIC/HYDRAULIC CRANE: The air pressure is the base behind this to move
the arm to pick and to lift the material handling crane. A mini compressor will create the
air pressure.
NEUMATIC/HYDRAULIC JACK: The air pressure will lift the material using a single
piston. The up/down valves will control the whole operation. A mini compressor will
create the air pressure.
ROBOTIC CRANE : A dual motor crane to lift material from ground level and and
place the material at the other side of it by a moving arm using other motor. One can put
the whole crane on a robotic vehicle with another two motors as moving crane for maetial
handling.
ROBOTIC TROLLEY FOR MATERIAL HANDLING: This trolley can be
implanted on rough surface to carry material and drop at a specific area.
AUTOMATIC STAMPING AND SORTING MACHINE FOR POST CARD: This
machine with a conveyor belt will check the four major cities and sort the post cards in
their corresponding boxes with auto stamped on it.

WIND MILL: The Actual wind mill model that produce electrical energy from wind and
charge the battery to run inverter directly.
SOLAR SUN SEEKER: - It actually track the sun as per its position and move the solar
cell/water heating plates accordingly so as to get maximum power from sun light.
THERMAL POWER PLANT USING STEAM: Steam energy is alternatively used to
generate electrical energy. A traditional arrangement commonly used by any thermal
plant but still very useful to display as teaching aid.
HYDEL POWER DAM: A Device SETUP that generate electrical energy from running
water. The model comprises a pump, a water reservoir, an alternator to gen. electrical
energy.
ELECTRICAL ENERGY FROM AMUSEMENT PARK RIDES (SEA-SAW,
SWING, SLIDE, ROLLER ETC.) : The different amusement rides can be designed to
generate electrical enegy while children are using actually the park.
ELECTRICAL ENERGY FROM SPEED BREAKER: This can be designed to
generate electrical energy when vehicles cross the breaker and roll the roller based speed
breakers connected with an alternator.
PADDLE CONTROLLED MOBILE CHARGER CUM EMERGENCY LIGHT: - It
works as we do cycling for exercise. Besides charging Mobile battery, it burns the extra
calories too. Further it can modified to churn any thing.
HYBRID CHIMNEY : The dual natural energy sources say Wind and Sun energy is
used to generate electrical energy. A good alternate source of energy for areas like deserts
or barren land, where sun light is available but low speed of wind flow is there.
SOLAR POWERED REFREGERATOR: Compressor less refrigerator to provide 12-
15 degree temperature while cooling and is also used to heat if required with the same
Thermo-EMF peltier junction based system works on 12V battery to be charged with
Solar Cells/ Panel.
ELECTRICAL ENERGY FROM COMPRESSED AIR- This ËœAIR GENERATORâ„¢
generate electrical energy from the air stored in a storage chamber using suitable air
compressor.
ELECTRICITY FROM D.J. DANCE FLOOR: An alternate source or energy can be
generated by the modified dance floor using pressure sensor based electricity generators.
WIND BELT: Another alternate energy generation to charge battery by low power wind,
say simple fan etc. A moving belt vibrate when wind strike it from any side.The magnets
on both ends make the generation of electrical energy .

ROBOTIC CAR WITH SENSORS: - This is a simple geared motorized vehicle with
free wheel at front will always take right turn when the Infrared sensors sense any
obstacle in front. An emergency brake can be applied if required.
JOY STICK CONTROLLED ROBOTIC CRANE WITH UP/DOWN PULLEY
ARRANGEMENT AND CIRCULAR MOTION: - This is an interesting project in the
field of material handling. A moving trolley carries a circular disc type-rotating platform
with crane arm. It moves all 360 degree.
LINE TRACER INDUSTRIAL VEHICLE: A material handling vehicle to carry goods
in industry and that follow black line to follow. Any obstacle in front will stop the vehicle
to avoid any accident by using IR or ultrasonic sensors.
ROBOTIC RADAR SYSTEM: - This robotic radar moves 180 degree carries an IR or
light sensor fires with an electromechanical Gun if finds some object.
ROBOTIC FIRE BRIGADE TROLLEY: - This robotic motorized trolley carries with
water tank with it and work automatically if finds the fine in its route.
ROBOTIC LIFT/ ESCALATOR: - This electromechanically System control the model
with keys operation for its clockwise and anticlock movement. It may also controlled
automatically with human sensor to save energy.

LOCOMOTIVE COACH CLEANER: - The model shows how the locomotives can be
washed from both sides using brush arrangement with motors.
EXERCISE/PYSCIOTHEREPY MACHINES: - Numerous types of machines can be
made under this topic with automation.
GAS BURNER TYPE WATER HEATER: The modified arrangement ot heat water
with burner and gas cylinder. It saves 25 to 30% of LPG gas in comparison to ordinary
gas stove to heat water.
COMPRESSOR LESS THERMO-EMF REFRIGERATOR: The fibre made box is
being modified as simple compressor less refrigerator to provide 12-15 degree
temperature while cooling and is also used to heat if required with the same Thermo-
EMF peltier junction based system.
DEEP FREEZER USING COMPRESSOR: A simple compressor based food stuff
storage system with the top opening glass lid. The project shows the use of compressor
in practical shape with voltmeter, ampere meter at display.
COOLING TOWER: The multi layer cooling tower will cool the liquid or water with
the help of water pump.
COMPRESSOR BASED SPRAY GUN: The mini electric compressor is used to spray
the water colours.
PAPER SHREDDING MACHINE: The project will cut the papers in small pieces to
make the use for packing etc.
SUN BLIND CONTROL: - It control the movement of sun shade as per Sun light
falling on the window.
HEAT EXCHANGER-PIPES: The smart cooling system to cool the heat effected area
required continuous cooling as on CPU of systems or machines that radiates heat.
ANALYSIS OF RECTANGULAR /TRIANGULAR FINS IN HEAT EXCHANGE
MACHANISM: An arrangement will help to study the heat exchange efficiency using
different types of fins in a rectangular heat pipe.
MOTORISED ELECTRIC AIR COMPRESSOR: The motorized arrangement with
air pump to store air to be required later.
ENGINE BASED AIR COMPRESSOR: A 12000 rpm 2.5 CC or 3.2 CC diesel engine
work on the mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will
create a sufficient air pressure to show the working.
360 MOTION AIR FLOW COOLER WITH DUAL SIDE AIR FLOW: A smart
cooler with moving blower that circulated the air in all 360 degree of motion all around.
DOOR OPENER: - Automatic gate/Door opener that sense the human presence and
open the door with mechanical motorized arrangement.
MOVING BRIDGE: The geared motor arrangement to lift the bridge on river in case of
free movement of Ships/Boats required.
CURTAIN MOVER: - A mechanical arrangement with optional battery operated
sutomatic remote controlled curtain movers. Useful for stage show etc.
EARTH MOVERS:
TOFFEE/PACKET VENDING MACHINE: - An automatic coin vending machine
that give you a packet (say Matchbox) or Toffee when you insert a 1 rupee coin in it. This
is a timer based motorized Mechanical arrangement.
SOLENOID BASED HAMMER: A electro-mechanical arrangement with IR sensor in
front to drill any hard surface area using solenoid coil arrangement.
TORQUE TESTING DEVICE: The device comprises a moving wheel with motor and
an arrangement to check the torque of that motor to carry the weight etc.
LIQUID DISPENSER MACHINE (WITH AIR CONTROL SYSTEM): The timer
operated arrangement can be used to dispense liquid from the source to fill any liquid say
milk/juice/petrol etc. This can be displayed using conveyor belt system to make the
model more presentable.
AIR COMPRESSED SPRAY GUN (WITH ELECTRIC AIR PUMP): The air pump
controlled spray gun for minor paint jobs normally required by automobile workshops or
artists.
LATHE TOOL PRESSURE DYNAMOMETER: A microcontroller based project is to
calculate the pressure formed at the tip of lathe tool so that one must sure that
SOLENOID BASED DRILLING /PUNCHING MACHINE WITH AUTOMATIC
TIMER BASED/IR SENSOR: The good project for automation in mechanical using a
drilling or punching system that operates automatically when object or work piece is
placed under this.
SUN TRAKKING WATER HEATER WITH MECH. PROCESS (WATER DROP
ETC.) A unique system that uses water itself to get maximum energy to heat water from
sun energy. The concept is to tap sun energy by means of sun tracking system. Also
known as Solar Oven.
DRINKING WATER FROM OCEAN WATER: An arrangement to convert sea water
into drinkable water with high speed evaporation and cooling & condensation process.
TEST-TUBE VIBRATING MACHINE WITH DUAL CONTROL- The arrangement
allows the bottles placed in a chamber to rotate with different angle and at different speed
to mix the setup.
AUTOMATIC VENTILATOR FOR WINDOWS PANELS: The mechanical
arrangement open the ventilators automatically when it sensor more heat or humidity in a
closed area.
LATH MACHINE CONTROLLER: A digital arrangement to move two motors
automatically to complete a process job with a specified speed and time frame.
AC COIL CLEANING SYSTEM : Project will ease the process of cleaning for coils or
similar system normally used in AC plants or even wire mesh in chimneys.
MOTORISED WHEEL CHAIR: The useful device for handicapped person to mive the
chair with the help of battery and motor arrangement. The keys will help to turn left or
right side.
ENGINE BASED GENERATOR : A 2.5 CC or 3.2 CC diesel engine work on the mix
blend of Kerosene, Ether Solvent and Castor Oil with manual start will charge the battery
or directly run small current operated devices.
PADDLE CONTROLLED DOOR OPENING SYSTEM: A very good project for
security persons to open or close the barrier or iron grill gates using paddle system.
ACCIDENTAL PROOF TRAINS USING RF SIGNALS : The automatic braking
system that makes an emergency brakes if two trains are coming on the same track. The
model showing with one static and one moving train on a track.
HEART BEAT PULSE PLOTTER MACHINE : This will draw the pulses from heart
using a finger sensor and will put on paper with the help of solenoid coil assembly.
LAPPING MACHINE: Lapping is an abrading process that is used to produce
geometrically true surfaces, correct minor surface imperfections, improve dimensional
accuracy , or provide a very close fit close between two contact surfaces.
MAGNETIC LEVITATION PLATEFORM: (A) A permanent magnet parallel rails
pulls up the small platform upward and a electromagnetic system pushes the same from
one end to other.(B) Same rail and platform system as above with a dc motor propeller
system to run the car.
MOVING ESCALATORS: The moving arrangement of stairs to move persons from
one floor to another by using IR sensor to detect human presence to save energy.
AUTOMATIC MOPPING MACHINE: The sensor based mopping machine will
change the path automatically and runs in a room to clean the floor area.
AUTOMATIC MILLING MACHINE: The three/two axis motor control system to be
run automatically with a digital circuit.
PCB FABRICATION: Every electronic workbench needs a PCB (PRINTED CIRCUIT
BOARD) to be fabricated to make any electronic circuit.
UNMANNED RAILWAY CROSSING : A crossing barrier gates will automatically
close doun mechanically when it sense the train is coming and open it after the train
crosses the barrier gate at unmanned crossing area to prevent accident.


REGENERATIVE BRAKING SYSTEM: - The system will generate electrical energy
while the wheel is about is stop when applying brakes. The model comprises a moving
wheel arrangement with induction braking system that create regeneration of electrical
energy to charge the battery again to save energy about 20%.
INDUCTION BRAKING: An alternate Electomagnetic braking arrangement to stop the
vehicle without wear n tear of shoe brakes. It can be used by Industries to stop machines
using this SWITCH BRAKES.
ANTI LOCK SENSOTRONIC BRAKING SYSTEM: The concept behind this project
is to demonstrate the wheel braking by electronic system with change in brake timing
using simple shoe brake.
PROPELLER BASED FORMULA CAR: A 2.5 CC or 3.2 CC diesel engine work on
the mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will rotate the
propeller blade in front of car and the air pressure provides the power to run this Formula
Car . An RF remote control unit can be used to provide direction on either side.
DIESEL ENGINE BASED CLUCH CONTROLLED CAR:
A 2.5 CC or 3.2 CC diesel engine work on the mix blend of Kerosene, Ether Solvent and
Castor Oil with manual start will rotate provides the power to run this Car . A clutch
arrangement operates on RF page link will control the whole assembly for speed and direction
on either side.
DIESEL ENGINE LOCOMOTIVE MODEL: A 2.5 CC or 3.2 CC diesel engine work
on the mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will rotate
the gears assembly that provides the power to run this Locomotive engine. The whole
structure can be placed on rail tracks.
PROPELLER/MOTORISED MONO RAIL: This simple propeller based vehicle will
run on the principle of air propel ion. The speed of vehicle is directly propotional to the
speed of propeller blades.
PNEMATIC TRANSPORT SYSTEM: An Age old technique can be used again to
transport the low weight material from one place to another in industries.
HYDRAULIC BREAKES: - A same mech. System that uses fluid as pressure to move
the brake shoes in moving wheels for braking systems.
HYBRID CAR “ ENGINE AND DC MOTOR OPERATED DUAL POWER CAR:
A 2.5 CC or 3.2 CC diesel engine work on the mix blend of Kerosene, Ether Solvent and
Castor Oil with manual start will rotate the propeller blade in front of car and the air
pressure provides the power to run this Formula Car .The solar cells on the top provide
additional power to charge battery and it will also run the car to save fuel. An RF remote
control unit can be used to provide direction on either side.
WIRELESS TYRE PRESSURE GAUGE: The microcontroller based project send the
data from tube/tyre rim to the dash board for the pressure of each tube. One can read at
the attached LCD on the project.
DRIVER LESS CAR: The three wheeler car that sense the path at its own (or follow
black line at the surface). It will aply brakes in someone comes in front of it or change the
path left or right as per requirement.
HYDRAULIC BRAKING SYSTEM FOR CAR/IND. APPLICATION : The paddle
operated or IR sensor operated hydraulic braking system with piston and oil chamber
connected to a motorized rotating wheel.
STEERING CONROLLED HEADLIGHT: The four wheeler usually find difficulty to
drive in hills specially at sharp turns. The model help them to change the focus of
headlight as the steering moves on either direction.
ENGINE/MOTOR VIBRATION CHECKER: The microcontroller based setup reads
the vibration of engine or motor. This helps to tune the engine to get maximum efficiency
with fuel savings.
IR AUTO BRAKING: A simple auto braking in material handling robot that stops
automatically when the obstracle comes in between. It create a switch, induction or
paddle brake to apply to stop the vehicle.
SEAT BELT AUTOMATIC: - An innovative idea to automat the seat belt locking
system using motor with parallel gear arrangement with timer circuit. The arrangement
itself attached inside the car to provide the facility.
ACTUAL CAR LIFTING JACK: A MOTORISED JACK: It actually lift the car
using its own car battery as power source.
ELECTROMAGNETIC SHOCK ABSORBER: A modified shock absorber that
activates automatically when it sense the pothholes on the road. It comprises road sensors
that provide instant response to act while driving.
STEERING BY WIRE : A DC geared motorized arrangement to replace existing
steering system by switch arrangement.
HYDRAULIC /COMPRESSED AIR BASED LIFTING JACK: An air engine
provide pressure to uplift the jack comprises piston filled with oil.
HOOVER CRAFT USING ENGINE: A 2.5 CC or 3.2 CC diesel engine work on the
mix blend of Kerosene, Ether Solvent and Castor Oil with manual start will rotate the
propeller blade and the air pressure provides the power to run the Hoover Craft. An RF
remote control unit can be used to provide direction on either side.
AIR PROPELLED MOTOR BOAT: A DC motor operated boat operates on propeller
blade and the air pressure provides the power to run the boat. An RF remote control unit
can be used to provide direction on either side.
AMPHIBEAN ROBOTIC CAR: The Air propelled or water propelled boat cum car
that runs on water and surface both. The RF modules can be placed to control the same
remotely.
MICROCONTROLLER AT-89C51 BASED AUTO GEAR SHIFTING SYSTEM:
The circuit shows the demo of auto shifting of gears using stepper motor with the change
in speed of vehicle. One can change the speed of DC motor as actual vehicle running
wheel
MICROCONTROLLER AT-89C51 BASED AUTO SPEED LIMITER WITH
AUTO BREAKING: The project is to read the rpm of a automobile and according to
that it limits the speed as Speed Governor. One can change the speed with variable
control.
DIGITAL AUTO SPEED LIMITER: For limit the speed suto.. if a school or
hospital comes in way.
ELECTROMACHANICAL BRAKE : A moving wheel with permanent magnets will
change the flux at the outer ring. The electromagnets can produce electrical energy to
charge battery or can be used to make brake on that wheel.
SOLAR TRICYCLE FOR KIDS: It runs on DC motor placed under the seat with chain
drive. The mains operated charger with Solar power charging option is an added
attraction of this model.
SOLAR TOY CAR: -The solar panel charge the battery. From this rechargeable battery
a dc geared motor drive the mini toy car. RF remote operation for steering control is also
an optional attachment.
COLLAPSIBLE STEERING MACHANISM: The model shows the basics of Steering
system with collapsible mechanism. The project consist of two front wheels with steering
system and an attachment for collapsible parts in case of frontal accident.
HYBRID MOTORBIKE: The ordinary bike can be converted into HYBRID vehicle as
the bike battery will provide power as alternative source when it get fully charged.
FOUR WHEEL STEERING SYSTEM: The driving on the hills will get more easy
with this mechanism.
CONTINEOUS VARIABLE TRANSMISSION: A new technique to run a vehicle
without using clutch to change the speed in continuous mode.
ELECTROMAGNETIC BRAKE USING BRAKE SHOE: The electromaganet will
expand the brake shoes to activate the braking machanism. More the current ,
Easy to brake.
DISC OR CLUCTH BRAKE SYSTEM IN AUTOMOBILES:

.
PC BASED IC-INTERNAL COMBUSTION ENGINE: An animated software project
shows the working of combustion engine and the hardware connected will actually shows
the rpm of engine.
PC BASED SEWER LINE CLEANING ROBOT: Itâ„¢s a 3d moving circular cleaner
that rotates and clean the inner surfaces of sewer pipes and communicate with PC of its
presence etc.
PC BASED ROBOTIC TROLLEY: - A single/double stepper motor based trolley with
an additional MOTOR will run in straight direction to load/unload the material handling.
One can select the stoppage as per requirement and it automatically return back if
obstruction comes into the path.
PC BASED LIFT/ELEVATOR CONTROLLER: - A useful project for all multistory
building to monitor lift operation and control both from lift switches and computer
keyboard. The PC screen will show the graphical representation of the lift up/down
movement. Operates with single stepper Or geared motor control.
PC BASED DISTANCE MEASUREMENT ROBOT: - The IR based robotic trolley
with to and fro movement can travel in a straight pipe to measure the distance traveled till
the obstruction come.
PC BASED LATH MACHINE CONTROL: - A CNC machine control system to
operate two stepper motors in a desired mode to cut works a work piece in specific shape
and size.
PC BASED AUTO BRAKING SYSTEM: - A unique project for automobiles/vehicles
that sense the rpm of the engine and automatically apply the brakes if speed exceeds the
specified limit.
PC BASED FORK LIFTER: - This Fork lifter lift the floor items and place at the
required space as instructed by the computer using stepper motor
PC BASED EARTHQUAKE PROOF BUILDING: - The center of gravity of a
building can be motorized controlled by a moving weights placed on the rooftop. The PC
will sense the earthquake and weight move accordingly.
PC BASED STICKER/PAPER CUTTING MACHINE: - This PC based parallel port
interfaced cutter and motor control circuit will cut the paper or sticker according to oneâ„¢s
requirement.
PC BASED THREAD/COIL WINDING MACHINE: - This PC based automatic
thread winding machine needs the no of turns required as input. The cutters will
automatically cut after the desired output
PC BASED CONTINEOUS WELDING VEHICLE: An GV(Automatic guided
Vehicle) controlled with computer will follow the routes specified once using keyboard
and further it will follow the same to work as contineous welding vehicle or Fire brigade
vehicle or material handling vehicle to drop things.
PC BASED DIE CUTTING: - A CNC based automatic system controlled with digital
circuit or PC controlled that operates two motors to do the job for up/doun of the tool and
movement of the base sheet to cut.
PC BASED HELICOPTER CONTROL: - This PC based system control the top fan
and tail fan with balance movement when you would like to
PC BASED JOINT ASSEMBLY PROJECT: - A mechanical graphic project to plot
two type of joint viz. cotter & knuckle. The hardware assembly can be connected as per
requirement.
PC BASED AUTO PACKET VENDING MACHINE: The packets/juice cans or any
other items can be vend by putting password in the computer.
PC BASED ROBOTIC SWEEPER: The PC controlled sweeper will perform the job as
per schedule and the area /route defined.
PC BASED ATM MACHINE: One can open the account and get the hard money in the
shape of coins.
PC BASED PROGRAMMABLE PAINT MACHINE: - A PC based Programmable
paint machine is CNC type system that completes its work as shedule task given.
PC BASED CAR PARKING MONITOR: - A 20 cars parking monitor cum control
system that check and enter the time and registration no. of each can while entry and exit
with IR/LASER sensors at gate. Parking full indication
PC/MECHINICAL BASED TIME OPERATED FOIL BENDING / DONA
MAKING MACHINE: The stepper motorized based system that manufacture/process
time operated system like bending machine.
PC BASED 3D XYZ AXIS MOTOR (MATRIX) CONTROL: - (a) The two stepper
motors can be controlled jointly with the single command operation to operate two XY
Axis motions to form a matrix at PC screen and a geared motor can be manually operated
to lift or release the material picked by hook or electromagnet.
PC BASED SCREW/DRILL SYSTEM: - This two stepper motor controlled system
either use to screw with the moving bolt jack arrangement or it can be used to drill up to
desired depth at a specific space.
PC BASED HEIGHT MEASUREMENT TOOL: - A rotating disk operated with
stepper motor stops at every 180 degree and read the height of the present

Fabrication of tomato grader
Automatic pneumatic vice and jack
Compressed air production using vehicle suspensor
Fabrication of hydraulic revolving multi-purpose trailer
Solar powered auto charging grinding machine
Remote controlled tilting wheel chair for physically disable
Fabrication of abrasive jet machine
Fully automated chapatti making machine
Fabrication of coin separator machine
Automatic rotating table with sequence operating machine
Automatic double axis welding machine
Automatic scrap collecting vehicle
Pneumatic operated three axis modern trailer
Waste chill recovery heat exchanger
Water collar cum air conditioner
Fabrication of friction welding machine
Electronic assisted hydraulic braking system
Fabrication of mist coolant system
Combined hydraulic and disk break
Fabrication of sub-marian (model)
Automatic wheel chair cum bed
Fabrication of tube rolling machine
Fabrication of switch board cutter
Fabrication of spring testing machine
Fabrication of pedestal spot welding machine
Fabrication of oil pump testing equipment
Fabrication of pedal washing machine
Automatic potato chips making machine
Fabrication of miniature boiler
Portable circular saw machine
Pneumatic operated chapathi making machine
Intelligent motorized wall painting crane
Fabrication of cylindrical grinding machine
Automatic high speed bottle washing machine
Fabrication of maize de-husker
Fabrication of hydro power plant
Fabrication of multi-process cutter
Automatic paint spraying pick and place equipment
Fabrication of vacuum conveyor for industrial application
Automatic pneumatic grinding machine
Accident preventing system for automatic pneumatic printing press
Automatic pneumatic multi-purpose press
Fabrication of automatic typical pipe cutting machine
D & f of automatic coil winding machine
Fabrication of pipe thread cutting machine
Fabrication of auto feed pneumatic vice
Fabrication of hydraulic pallet truck
Fabrication of automatic punching/printing conveyor
Digital locking system for material handling vehicle
Fabrication of escalator
D & f of injection moulding machine
Fabrication of potato chips making machine
Fabrication of non-conventional air compressor
Fabrication of multi-engine compressor
Fabrication of ground dryer
D & f of pneumatic ramming machine
D & f of pneumatic auto feed drilling machine
Fabrication of slotting attachment in drilling machine
Fabrication of pneumatic sheet cutting machine
D & f of manual coil winding machine
Fabrication of automatic foot dust cleaning machine
Automatic power saving conveyor for industrial application
Fabrication of floor cleaning machine
Fabrication of cylindrical tapping machine
Fully automated drilling machine
D & f of pneumatic auto feed punching and riveting machine
Fabrication of cam operated valve
Fabrication of pantograph universal gas cutting machine
Fabrication of spring loaded fan
Fabrication of automatic sofa comports
Fabrication of pneumatic quick return mechanism
Fabrication of multi-speed gear box
D & f of pneumatic auto feed punching machine
Fabrication of automatic cold chamber die casting machine
D & f of pneumatic printing press machine
Automatic car parking system for apartment building
Sensor based automatic paint marking machine for sprocket industries
Automatic packing control machine for industrial application
Design & fabrication of conveyor automation
Automatic accident avoiding system for machines
Sensor based inspection conveyor
Automatic visitor guided with material handling vehicle
Self centering 4-jaw chuck for lathe
Simple indexing stepper motor in shaper machine
Automatic water level sensing crane
Fabrication of accident preventing system in cutting machine
Pc based wireless material handling vehicle for industrial application
Remote controlled material handling crane
Fabrication of pneumatic machining time reduction in shaping machine
Fabrication of electromagnet scrap collecting machine
Accident avoiding system in heavy cutting machine
Fabrication of automatic bottle washing machine
D & fabrication of hydraulic lift using pressure booster
D & f of pneumatic multipurpose press
Automatic break failure and engine over heating indication
Fabrication of domestic floor mill
Fabrication of hybrid vehicle
D & fabrication of portable slotting machine
Fabrication of automatic dish washing machine
Fabrication of pneumatic high speed reciprocation hack saw machine
Fabrication of pneumatic drill jig
D & f of automatic lubrication machine
Fabrication pneumatic leaf-cup making machine
Fabrication of pneumatic multipurpose machine
D & fabrication of hydro-pneumatic vice using pressure booster
Fabrication of hydraulic pipe bending machine
Fabrication of oil pump testing equipment
Fabrication of mini water service station
Fabrication of multi drill holder
Fabrication of special purpose tapping machine
Fabrication of hydraulic vice with power pack
Fabrication of pneumatic slotting machine
Fabrication of high speed portable pipe cutting machine
Fabrication of pneumatic paper cup making machine
Fabrication of pneumatic injection moulding machine
Fabrication of mini hydraulic hand operated zip crane
Fabrication of lamination machine
Fabrication of universal tapping machine
Fabrication of twin spindle drill holder
Fabrication of pneumatic bearing puller
Fabrication of marine engine model
Fabrication of coir making machine
Fabrication of cylinder block boring machine
Fabrication of road marking machine
Fabrication of bottling of sugarcane juice machine
Fabrication of grass cutting machine
Fabrication of lathe coolant pump with fitting arrangement
Fabrication of tool post grinder
Fabrication of concave attachment for lathe
Fabrication of arbor presses machine
Fabrication of eccentric press machine
Fabrication of fly press machine
Fabrication of level operated conical bending machine
Fabrication of hand operated edge folding machine
Fabrication of semi-circular cutting machine
Fabrication of hydraulic hand operated pipe bending machine
Fabrication of rotary gear pump
D & f of self primary centrifugal pump
D & f of two stage self primary pump
Automatic cylinder boring machine
Automatic motorized door open/close mechanism
Motorized focus light mechanism (in all direction)
Automatic acrylic sheet bending machine (heater control)
Automatic lamination machine
Mini crushing machine
Electrical spot welding machine
Automatic plant water moistering system for garden
Automatic water level indicator and controlling system
Aero plane controlling system (glider model)
Digital controlled coil winding machine
Fabrication of air leak detector
Temperature controller with cooling system
Spark plug tester
Automatic pneumatic gear changer
Automatic dam shutter control system
Portable pipe cutting machine
Fabrication of variable drive gear box
Fabrication of hydraulic disk brake
Fabrication of automatic steering mechanism
Fabrication of pneumatic belt conveyor
D & f of contour turning attachment for lathe
Shocks absorber testing machine
Energy saving light arrangement
Power saving system for lathe
D & f of pneumatic reciprocating water pumping system
Fabrication of electronic hack saw machine
Automatic pressure controller cum valve open/close arrangement
Automatic gate open/close system
Robot controlled vacuum cleaner
Automatic moisture and light controlling system
Automatic vulcanizing machine
Paper counting machine
Industrial boiler flame remote adjustment system
Fabrication of motorized crane
Remote control dish antenna tracking system
Fabrication of mosaic polishing machine
Fabrication of sensor operated automatic ramming machine
Fabrication of pneumatic multipurpose grinder
Pedestal spot welding machine

AUTOMATION & MECHATRONICS BASED PROJECTS

A. Automatic rotating table with sequence operating machine
B. Electronic Fuel Injection (EFI) system for Two wheeler
C. SMS based Automatic two wheeler locking system
D. Remote controlled Vacuum Cleaning Robot
E. Automatic Scrap Collecting Vehicle
F. Automatic Fire fighting cum material handling vehicle
G. Sensor Based Automatic paint marking machine for sprocket Industries
H. Automatic railway track crack detecting Vehicle
I. Remote controlled tilting Wheel chair
J. Automatic Three axis hydraulic modern Trailer
K. SMS based Pick and place Robot
L. Automatic Spring End Grinding Machine
M. Automatic Pneumatic vice and jack
N. Fabrication of Automatic typical Pipe Cutting Machine
O. SMS controlled automatic pneumatic ramming machine
P. Fabrication of Automatic cold chamber Die Casting Machine
Q. Design & Fabrication of Conveyor Automation
R. Remote operated weapon System
S. Automatic Car Parking System for apartment Building
T. Cell phone controlled pick and place robot
U. SMS based automatic pneumatic Punching and riveting machine
V. Video Analyzing remote controlled vacuum Cleaner
W. Automatic drunken drive avoiding system for automobile
X. Intelligent active Suspension system for two wheeler
Y. Automatic Packing control Machine for Industrial Application
Z. Automatic Double Axis Welding Machine
AA. Automatic Pneumatic Paper cup folding Machine
BB. Automatic Wheel chair cum bed
CC. Automatic Sky Car parking System
DD. Automatic Pneumatic Reciprocating Water Pumping System
EE. Automatic Visitor Guided with Material Handling Vehicle
FF. SMS based Bomb detecting robot
GG. Automatic Vegetable (or) Lemon Cutting machine
HH. Remote controlled air craft (Flying Model)
II. Automatic sensor based wall painting robot
JJ. Automatic accident avoiding system for machines
KK. Electronic assisted hydraulic braking system
LL. Two Wheeler Automation with security System
MM. SMS based automatic pneumatic punching machine
NN. Automatic Pneumatic Grinding Machine
OO. Fabrication of Unaided Guided Vehicle (UGV)
PP. Automatic Power Saving Conveyor for Industrial Application 43. Fabrication of sub marine (Model)
QQ. Auto head-lamp Alignment system for automobile
RR. Railways accident Avoiding System (Level crossing and Fire Alarm)
SS. Fabrication of Automatic Magnetic Accident preventer for Train
TT. SMS based automatic drilling machine
UU. Fabrication of Solar automatic cell phone charger with pay system
VV. Fabrication of Automatic Vehicle Over speed controlling system for School Zone
WW. Fabrication of Automatic car overtaking system

---

AUTOMOBILE BASED PROJECTS

A. Fabrication of Foldable Electric Go Bed Drive
B. Fabrication of four wheel steering system
C. Over speed indication and Automatic accident Avoiding System for four wheeler
D. Efficiency Increasing System in Automobile by using preheating method
E. Electronic Fuel Injection (EFI) system for Two wheeler
F. D & F of Triangular air Compressor with Common Compression Chamber
G. SMS based automatic two wheeler locking system
H. Fabrication of man less defense
I. Fabrication of Two Engine Synchronization for Four Wheeler
J. Automatic sensor based wall painting robot
K. Fabrication of Electric Two Wheeler
L. Automatic Differential Unit locking system for Automobile
M. Electronic assisted hydraulic braking system
N. SMS based vehicle Ignition controlling system
O. Electrical Power Generation system using Railway track
P. Fabrication of Automatic Vehicle Over speed controlling system for School Zone
Q. Fabrication of three axis pneumatic modern trailer
R. Automatic Break Failure indicator and Engine Over Heating Alarm
S. Two Wheeler Automation with security System
T. Combined hydraulic and disk break
U. Compressed air production using vehicle suspensor
V. Remote controlled air craft (Flying Model)
W. Automatic Pneumatic welding Robot
X. Intelligent Active Suspension system for two wheeler
Y. Remote operated weapon system
Z. Fabrication of Sub-Marine (Model)
AA. Automatic Scrap collecting Vehicle
BB. Fabrication of Gear Level Indicator for Automobile
CC. Automatic Vehicle Over speed Controlling System
DD. Fabrication turbo charger for two wheeler
EE. Video analyzing remote controlled vacuum cleaner
FF. Fabrication of Electro-Magnetic braking System For Automobile
GG. Fabrication of Go Ped Drive
HH. Fabrication of Foldable two wheeler
II. Intelligent Way Searching Pick and Place Robot
JJ. Automatic paint spraying pick and place Equipment
KK. Fabrication of Path finding Vehicle
LL. Automatic Electro-magnetic Clutch
MM. Cell phone controlled pick and place robot
NN. Remote controlled Pick and Place video analyzing robot
OO. Fabrication of Automatic pneumatic jack
PP. Fabrication of Automatic steering control system for automobile
QQ. Fabrication of Multi-Engine compressor
RR. Fabrication of Solar Race Car
SS. Fabrication of Multi Nut (Wheel) Tightner
TT. Electro-Hydraulic System for Automation in Four Wheeler
UU. Automated Guided Vehicle (AGV)
VV. Automatic material handling Fire Fighting Robot
WW. Aero plane Controlling System (Flying Model)
XX. Intelligent Braking System in Four Wheeler (IBS) a

---

A. SMS based Solar Vehicle
B. Solar lighting with auto changeover system
C. Solar automatic cell phone charger with pay system
D. Hybrid system for home (Wind mill with Solar Power)
E. Solar Birds Scrarer
F. SMS based solar pick and place robot
G. Domestic wind mill
H. Auto charging grinding machine with solar power
I. Solar powered remote controlled bomb detecting robot
J. Solar Automobile Fridge
K. Solar powered remote operated weapon system
L. SMS controlled solar moving vehicle for industrial Application
M. Grid Interactive inverter (Wind Mill)
N. Solar Electric go bed Drive
O. Electrical power generation using steam power plant
P. Solar Powered automatic temperature controller with cooling system
Q. Solar powered fire fighting with visitor guided vehicle
R. Electrical Power Generation system using Railway track
S. Solar Electric two wheeler with Rechargable battery
T. Solar Power Generation With Auto Tracking
U. Electrical Power generation using thermal power plant
V. Solar Agricultural Water Pumping System
W. Horizontal Turbine Type Domestic Wind Mill
X. Solar Air conditioner
Y. Artificial Intelligent based Solar Vehicle
Z. Solar remote controlled video analyzing pick and place vehicle
AA. Solar Automated Track Guided Vehicle (Solar ATGV)
BB. Battery Cycle
CC. Solar Powered Voice controlled vehicle
DD. Solar Wheel Chair for physically Disabled
EE. Solar powered automatic vehicle accident information system
FF. Solar Powered Unaided Guided Vehicle (Solar UGV)
GG. PC based solar car
HH. Solar race car
II. Solar Powered Automatic Railway Gate Controller
JJ. Solar Powered Path Finding Robot
KK. Remote controlled Solar Car
LL. Solar UPS with auto tracking
MM. Solar Lighting System
NN. Solar Fan with Lighting System
OO. Solar Car (Running Model)
PP. Automatic Solar street light controller
QQ. Solar Cycle
RR. Solar Water Heater
SS. Wind Turbine Power Generation System
TT. Solar railway track crack detecting vehicle
UU. Electrical Power Generation using Speed Breaker
VV. Solar powered accident preventer for train
WW. Solar Train
XX. Solar Automated Guided Vehicle (Solar AGV)

---

A. Waste chill recovery heat exchanger
B. Solar Air Conditioner
C. Mist Coolant system
D. Water Cooler cum Air Conditioner
E. Transformer heat reduction system
F. Water cooler cum Water heater by using refrigeration System
G. Fabrication of Automatic temperature controller with cooling system
H. Fabrication of Hot and Cold Water Dispenser
I. Fabrication of Solar air conditioning Machine
J. Fabrication of Solar Fridge
K. Fabrication of Solar Air Cooler
L. Automatic Electro-plating coating process
M. Electrical Power Generation using Thermal Power Plant
N. Fabrication of Solar refrigeration system
O. Fabrication of Bottle Cooler
P. Fabrication of Activated Carbon Manufacturing Plant
Q. Fabrication of Mini Water Heater
R. Modern Thermal Power Plant (Model)
S. Automatic pneumatic vulcanizing Machine using heat sensor
T. Fabrication of Water cooler cum Air Cooler
U. Fabrication of Solar Air Cooler cum Heater
V. Fabrication of refrigeration system (trainer)
W. Fabrication of L.L.D.P. Material extruder
X. Fabrication of Water Heater
Y. Fabrication of double reflection solar Cooker
Z. Solar Kettle (or) Solar Parabolic Collector
AA. Fabrication of Cooling tower
BB. Electrical Power Generation using Steam Power Plant
CC. Fabrication of Solar Water Disalation (Purification)
DD. Multi-Purpose Ground Dryer (or) Multi-Purpose Dryer and Room Heater
EE. D & F of Chemical Processing Plant
FF. Fabrication of solar water disalation by using photovoltaic method
GG. Fabrication of automatic humidification system
HH. Solar Water Purification by using thermal method
II. Paper cup folding Machine by using heater
JJ. Fabrication of Ground Dryer
KK. Fabrication of Micro Wave Oven
LL. Fabrication of Mini Boiler
MM. Fabrication of Air Dryer
NN. Fabrication of Lube oil cooler
OO. Fabrication of double effecting solar cooker

a. SPM for grinding of Radome Shell (Internal grinding to reduce the weight)
b. Design of cam for radial shell grinding (CAM profile for copying attachment)
c. Fixture design for VMC (Cylinder Head)
d. Fixture design for HMC (Cylinder Head)
e. Process Capable Tolerancing (Setting proper tolerances early in the design phase to achieve quality production and reducing production cost)
f. Reverse Engineering process (3D scanning developing 3D surface or point data, converting 3D point data to virtual design and manufacturing the model with desired alterations)
g. Composite material analysis in cosmos
h. Check valve flow analysis Cosmo Floworks
i. Manufacturing Process & process planning for a component or Job
j. Process tooling for complete production cycle (Tool Design)
k. Combination Tool Design

1290. DESIGN AND FABRICATION OF LOW SPEED SUCTION TYPE WIND TUNNEL

1291. PASSIVE SOLAR TRACKING SYSTEM

1292. PLASTIC INJECTION MOULDING MACHINE

1293. DESIGN,FABRICATION AND PRELIMINARY TESTING OF TWO AXES PASSIVE TYPE SOLAR TRACKING SYSTEM

1294. DESIGN AND FABRICATION AND PERFORMANCE STUDY ON WATER LUBRICATED JOURANAL BEARINGS

1295. NUMERICALLY CONTROLLED GEAR CUTTING ATTACHMENT TO MLLING MACHINE

1296. FLUIDIZED BED COATING

1297. PERFORMANCE ANALYSIS OF CETRIFUGAL PUMP RUN AS TURBINE

1298. DESIGN AND FABRICATION PORTABLE PUFFING MACHINE

1299. INVESTIGATION OF FAST BURNIGN OF THE LEAN MIXTURES IN SMALL CAPCITY SPARK IGNITED ENIGNES USING IN CYLANDERS CERONMIC CAOTING

1300. INVESTIGARION ON REDUCTION OF CO ANND UBHC IN TWO WHEELER SI ENGINE WITH CARTALIC CONVETER USING SILVER COATED 13 X ZEOLITE AS CATALYST

1301. STAIR CASE CLIMBER

1302. DEVELOPMENT OF SOLAR ENERGY BASED NEW DESALINATION UNIT

1303. UNIVERSAL CUTTING MACHINE

1304. DESING NAD FABRICATION OF TRANSMISSIBILITY ANALYSER FOR SHOCK ABSORBER

1305. OPIMAZATION OF PERFORMANCE AND POLLUTION IN A DIESEL ENGINE USING ESTERIFIED HOGNE OIL AS AN ALTERATIVE FUEL

1306. DECISION ORIENTED MANAGEMENT INFORMATION SYSTEM FOR KOODAL SANGAM DEVELOMENT PROJECT

1307. DESING AND FABRICATION OF WHIRL POOL TUBE

1308. COMPUTER AIDED DESIGN AND DRAFTING OF SPUR GEAR PUMP

1309. EFFECT OF DUAL IGNITION AND LEANING OF THE MIXTURE ON THE PERFORMANCE AND EMISSION OF A SAMALL CAPACITY 2S 4S IGNITION ENGINE

1310. SEED SOWER

1311. DESIGN AND FABRICATION OF COST EFFECTIVE CATALYTIC CONVERTER

1312. MINTO WHEEL

1313. ADIBATIC ENGINE

1314. A ADJUSTABLE DORNING HEAD

1315. HAND OPERATED HYDRUALIC PRESS

1316. DESIGN AD FABRICATION OF SEMI AUTOMATIC BAMBOO SLICING MACHINE

1317. MULTIPURPOSE METTALIC AND FIBGRE SHEET PROCESSING

1318. DESIGN AND FABRCIATION OF COFFEE ULPING MACHINE

1319. COTTON DUST EXTRACTOR

1320. DESIGN AND FABRICATION OF GAS INJECTOR FOR LPG

1321. PEDAL OPERATED GROUND NUT POD PLUCKING MACHINE

1322. SOFTWARE DEVELOPMET FOR THE DYNAMICALLY BALANCING OF TOOL MANAGEMENT BY EXPERT SYSTEM

1323. DESIGN AND FABRICATION OF PORTABLE TYPE PNEUMATIC DRILL

1324. FABRICATIO OF THERMAL CONDUVTIVITY

1325. AN EXPERIMENTAL INVESTIGATION AND THEORETICAL DEVELOPMAENT FOR HEAT TRANSFER AND THERMAL STORAGE CHARACTERSTICS OF A PACKED BED SOLAR AIR HEATER

1326. DESIGN AND FABRICATION OF SOLAR STERILISER

1327. EVALUTION OF EPOX BRAKE LINERS FOR AUOMABILES

1328. DESIGN AND FABRCIATION OF HYDRAULIC BOO TYPE LIFTING PLATFORM

1329. DESIGN AND FABRICATION OF GO KART

1330. DESIGN AND FABRICATION OF BARREL LIFTER AND TILTER

1331. DESIGN AND DEVELOPMENT OF NEWS PAPER VENDING MACHINE

1332. PERFORMANCE OF A TWO STROKE S I ENGINE WITH TIMED PETROL INJECTION IN ANTE CHABER

1333. SAFETY DEVICE TO AVOID OVERHEAT OF DIESEL ENGINE

1334. SPRING MANUFACTURE MACHINE

1335. L P G CARBURETTOR FOR 4 STROKE MULTICYLIDRICAL S I ENGINE

1336. DESIGN AND FABRICATION OF LOW COST TRACTOR MOUNDED MULTIPURPOSE D D T POWDER DISSEMINATOR

1337. MULTIPURPOSE MINI FLOUR MILL

1338. DESIGN FABRICATIO AND PROGRAMMING OF ROBOT OBJECT SORTING AND ASSEMBLY

1339. DESIGN AND MANUFACTURE OF SPINNING DIE AND TOOL

1340. REMOTE CONTROLLED JACK

1341. DESIGN AND FABRICATION OF AUTOMATED CHALKI MAKING MACHINE

1342. SIMPLIFIED HYDRAULIC PRESS

1343. MINI HYDEL POWER GENERATION UNIT

1344. DESIGN ADN FABRICATION OF NON CONTACT AUTOSIZING DEVICE FOR CYLINDRICAL GRINDING

1345. AUTOMATION OF LEVEL CROSSING SYSTEM

1346. SOLAR PUMP

1347. GINGER SKIN SCRATCHER

1348. DESING AND FABRICATION OF LOAD CELL AND MEASURMNE OF LOAD I A VEHICLE USING THE MEMBERS PF VEHICLE AS LOAD CELL

1349. SOFTWARE DEVELOPMENT OF AIR SEPARATION COLUMN FOR CRYOGINE

1350. BIOMASS GASIFIER WITH REFERENCE TO MODIFIED COMBUSTION CHAMBER FOR BURNING TYRES AND HUSK MANUFACTURE OF PUFFED RICE

1351. DESIGN AND FABRICATION OF A PICO-HYDEL TURBINE

1352. COMPUTER AIDED DESIGN OF CAMS

1353. SCRATCH INDENTATION TEST ON THERMAL BARRIER COATING OF DIESEL ENGINE PARTS

1354. PREPARATION OF THERMAL BARRIER COATING POWDER AND THE THERMAL SHOCK RESISTANT TEST RIG

1355. DESIGN AND DEVELOPMENT OF MINI PAPER RECYCLING MACHINE

1356. AIR AND NOISE POLLUTION IN BANGALORE CITY - MEASUREMENT AND ANALYSIS

1357. DEVELOPMENT AND CHARACTERISATION OF JUTE REINFORCED POLYESTER COMPOSITES

1358. PC BASED FLOW METER AND ELECTRONIC PORTABLE METER

1359. PRODUCTION OF BIOGAS AND CONVERSION OF DIESEL ENGINE TO RUN ON BIOGAS IN DUAL FUEL MODE

1360. STEAM GENERATION BY SOLAR ENERGY

1361. DESIGN,FABRICATION AND CALIBRATION OF CAPILLARY FLOW METER FOR MEASURING LOW FLOWS FOR USE IN PRESSURE DROP ACROSS POROUS MEDIA

1362. HOT AND COLD LAMINATING MACHINE

1363. DESIGN AND FABRICATION OF PEDAL OPERATED DIAPHRAGM PUMP

1364. HAND AND PEDAL OPERATED ROPE AND WASHER PUMP FOR RURAL DEVELOPMENT

1365. MULTIBLADE ROTOR FOR WATER PUMPING APPLICATION

1366. HAND FOOT OPERATED MODIFIED WASHING MACHIE

1367. HEAT TRANSFER LONG A VERTICAL HEATED TUBE ATTACHED TO A THERMALLY INSULATED CHIMNEY

1368. OPTIMIZATION OF SPARK IGNITION TIMING USING MICROPROCESSOR AND THEREBY INCREASING ENGINE EFFICIENCY AND REDUCING UBHCS IN THE EXHAUST

1369. OPTIMISING PRODUCTIVITY OF A BRICK MANUFACTURING UNIT

1370. AN ANALYTICAL MODEL FOR PNEUMATIC TYRE TRACTION TECHNIQUE

1371. PERFORMANCE ANALYSIS OF A THREE WHEELAR DI DEISEL ENGINE USING DI ETHYL EHER AS AN OXYGENATED FUEL ADDITIVE

1372. DETERMINATION OF STEFAN BOLTZMANN CONSTANT USING DIFFERENT FLUIDS

1373. PNEUMATIC AUTO LOADER

1374. PLASTIC CUP MAKING MACHINE

1375. COMPARATIVE STUDY OF HEAT TRANSFER CO-EFFICENT BY NATURAL CONVECTION THROUGH CYLINDER OF DIFFERENT MATERIAL AT DIFFERENT ORIENTATIONS FOR FLUIDS

1376. SOLAR POWERED WATER PUMP

1377. CASCADE SYSTEM OF SOLAR COLLECTOR

1378. APPLICATION OF AUTOCAD IN GARMENT INDUSTRY

1379. PNEUMATIC ROBOT

1380. AN EXPERIMENTA INVESTIGATION ON PACKED BED SOLAR AIR HEATER

1381. AUTOMATIC FEEDING ARRANGEMENT FOR WHEEL HEAD OF ACCUGRIND 300 SURFACE GRINDER

1382. HYDRAULIC NUMBER PUNCHING MACHINE

1383. PICK-N-PLACE PNEUMATIC ROBOT

1384. SHAPER ATTACHMENT ON LATHE

1385. ANALYSIS AND AFBRICATION OF ASOLAR GRAIN DRYER

1386. FLUIDISED BED COMBUSTION

1387. SOFTWARE DEVELOPMENT ON SPUR GEARS TROUGH COMPUTER AIDED ANALYSIS

1388. DIGITALLY OPERATED GEAR SYSTEM

1389. MINI ECONOMIC CAR

1390. VIBROSCREEN

1391. DESIGN OF SUITABLE PRESS FOR PUNHING ON WATCH CASE BACK COVERS

1392. SPARK PLUG CLEANER AND TESTER

1393. MICROPROCESSOR LINEAR TEMRATURE CONTROLLER

1394. HYDRAULIC OPERATED BAKELITE MOULDING PRESS

1395. PROFILE PROJECTOR

1396. DESIGN AND FABRICATION OF MULTIPLE POWERPRESS

1397. MULTY PURPOSE PACKING MACHINE

1398. DESIGN AND FABRICATION OF A BEBEL GEAR FOR A BICYLE

1399. FUEL SAVAR TWO STROKE PETROL ENGINE

1400. PNEUMATIC ACTUATOR FOR NOZZLE MOVEMENT

1401. INTERMITTENT JET ENGINE

1402. DESIGN AND FABRICATION OF SEMI AUTOMATIC POTOTO SOWING MACHINE

1403. REMOTE OPERATED TRAIN COTROLLED RAILWAY GATE CROSSING

1404. DESIGN AND FABRICATION OF PEPPER SEPARATOR

1405. OPTO ELECTRONIC VIBROMETER USING LASER

1406. REDUCTION IN PERCENTAGE OF CARBON MONOXIDE IN THE EXHAUST MAKING USE OF BASE METAL OXIDES IN THE CATALYTIC CONVERTER

1407. MODIFIED ABRASIVE JET MACHINE

1408. MAGNETIC SUSPENSION SYSTEM

1409. DESIGN AND FABRICATION OF SOLAR DRIER

1410. THERMO ELCTRIC REFRIGERATOR SYSTEM

1411. 3D GENERATION FROM 2D DRAWING

1412. MEASURMENTS OF LOAD ON SIMULATED MODEL OF AVEHICLE

1413. SOLAR ASSISTED WASTE WATER TREATMENT SYSTEM

1414. MICROPROCESSOR BASED ALTERNATOR SYNCHRINIZER

1415. DESIGN AND FABRCATION

1416. FABRICATIO OF GLASS CUTTING TEST RIG

1417. DESIGN AND FABRICATION OF MANUALLY OPERATED TENDER COCONUT PERCIN DEVICE

1418. FABRICATION AND TESTING OF HEAT PIPES

1419. DESIGN AND COOLING SYSTEM FOR DISTILLATION UNIT

1420. MICROCONTROLLER BASED DIGITAL OEVER VOLTAGE RELAY

1421. MODERIZATION OF COOLING TOWEST FOR IMPROVED PERFORMANCE

1422. DESIGN AND ANIMATION OF INTERNAL COMBUSTION ENGINE PARTS USING C GRAPHICS

1423. FABRCIATION OF AN EQUIPMENT FOR DIGGING THE GROUND IN ORDER TO LAU TELEPHONE ELECTRIC CABLES

1424. ANALYSIS OF VARIATION OF TEMRATURE PROFILE IN FORCED AND NATURAL CONVECTION OVER CYLINDRICAL OBJECT

1425. DESIGN AND TECHNO ECONOMIC FEASIBILITY ANALYSIS OF PHOTOVOVTIC SYSTEM FOR BEC HOSTEL

1426. REMOTE CONTROLLED ROLLING SHUTTER

1427. COMPARATIVE STUDY OF THERMAL CONDUCTIVITY OF SOLID AND HALLOW METAL RODS

1428. EXPERIMENTAL DERERMINATION OF THERMAL CONDUCTIVITY OF VEGETABLES AND FRUITS

1429. DESIGN AND FABRICATION OF A MODEL OF PNEAMATIC ELEVATOR FOR TWO STOREY BUILDINGS

1430. DESIGN AND FABRICATION OF TEST TIG FOR THE IMPACT OF JET

1431. MICROPROCESSOR BASED MAGNETIC SHOCK ABSORBER

1432. DESIGN AND FABRICATION OF CHILLI SEEDS EXTRACTOR

1433. DESIGN AND FABRICATION OF RAISIN SEPARATOR AND SORTING MACHINE

1434. DESIGN AND FABRICATION OF EQUIPEMENT FOR FINDING COMPACT OF JET VANE

1435. WAX APPLICATOR FOR FRUITS

1436. MODELLING OF THEMAL PERFORMANCE OF BUILDINGS

1437. AUTOMATIC WEIGHING AND PACKING MACHIENE

1438. DESIGN AND FABRICATION OF SOLAR WATER DISTILLATION UNIT

1439. DESIGN AND FABRICATION OF PC BASED IC ENGINE TEST RIG

1440. METALLURGICAL GRINDING AND POLISHNG MACHINE

1441. FARM PULVIRESER

1442. DTERMINATION IF STRESS USING ROSETTE STRAIN GAUGE

1443. ROTATIONAL PAINT MIXTURE

1444. MULTI JET SPARE PARTS CLEANING MACHINE

1445. MULTI PURPOSE AGRICULTURE EQUIPMENT

1446. LEAF PLATE MOULDING MACHINE

1447. POST HOLE DIGGING ATTACHMENT FOR TRACTORS

1448. SOLAR POWER AEGENERATIVE ENGINE

1449. COMPUTER SIMULATION OF 4STROKE SPARK IGNITION ENGINE USING C++

1450. DESIGN AND FABRICATION OF DIESEL PARTICULATE FILTER SYSTEM FOR STATIONERY DIESEL GENERATOR SET TO REDUCE PARTICULATE EMISSIONS

1451. DEVELOPMENT OF BIODEGRADABLE FIBRE REINFORCED POLYFORCED POLYSTER COMPSITE ARTICLES FOR INDOOR AND OUTDOOR APPLICATION

1452. ALLEGIANCE ROBOT

1453. MACHINABILITY OF COMPOSITES AND ANALYSIS OF COMPOSITE BEARING USING FINITE ELEMENT METHOD

1454. DESIGN AND DEVELOPMENT OF ELECTRIC DRIVE PICK AND PLACE ROBOTIC ARM

1455. DESIGN AND DEVELOPMENT OF A COMPUTER CONTROLLED MOBILE BASE FOR ROBOTIC SYSTEMS

1456. DESIGN AND FABRICATION OF A COMPUTER CONTROLLED AUTOMATIC SPRAY PAINTING ROBOT

1457. SELF-GUIDED VEHICLE

1458. EXPERIMENTAL TEST RIG TO DETERMINE THERMAL CONDUCTIVITY OF FRUITS AND VEGETABLES

1459. INSTRUMENTATION FOR SIMULTANEOUSMESURMENT OF RUT PATH

1460. STUDIES ON MICROSTRUCTURAL EVALUTION OF EUTECTIC AL-SI ALLOYS A NEW APPROACH

1461. EVALUATION OF PROPERTIES OF SUGARCANE WASTES FOR USE AS A FUEL IN COGENT PLANT

1462. AUTOMATED SMART PESTICIDE SPRAYER

1463. FORCED CONVECTION IN-DIRECT TYPE SOLAR DRIER

1464. STUDY ON THERMAL PROPERTIES OF FOOD STUFFS AND FRESH VEGETABLES

1465. LEVER AND PEDAL OPERATED COCONUT DEHUSKER

1466. SOLAR POWERED SMART WATER LEVEL CONTROLLER

1467. REMOTE CONTROLLER JACK

1468. MICROPROCESSOR BASED CONTROL OF STEERING SYSTEM USING JOYSTICK

1469. DESIGN AND FABRICATION OF HYDRAULIC TRANSMISSION SYSTEM IN TWO WHEELER

1470. REMOTE OPERATED PESTICIDE SPRAYER FOR ARECANUT

1471. PC BASED PICK N PLACE WIRELESS MOBILE ROBOT

1472. MAKING FOSSIL FUEL BLOCKS FROM AGRICULTURE WASTAGES

1473. SOLAR POWER DRIVEN THREE WHEELED VECHILE FOR HANDICAPPED

1474. ECO-FRIENDLY AQUA SILINCER

1475. STRECH-O-BED

1476. MAGNETIC SHOCK ABSORBER AND GENERATION OF ELECTRIC USING SHOCK ABSORBERS

1477. CARDAMOM DRIER

1478. COIR EXTRACTOR

1479. AUTO GYRATOR

1480. DESIGN AND FABRICATION OF FLOOR CLEANER

1481. DESIGN AND FABRICATION OF ADVANCED WHEEL CHAIR

1482. RAPID PROTOTYPING

1483. DESIGN AND FABRICATION OF WOOL CUTTING MACHINE

1484. ONLINE THICKNESS MEASUREMENT OF ROLLED STRIPS

1485. DESIGN AND FABRICATION OF INTEGRATED TYPE SOLAR WATER HEATER

1486. DESIGN, FABRICATION AND ANALYSIS OF TEST RIG TO DETERMINE THERMAL CONDUCTIVITY OF LIQUIDS

1487. DESIGN , FABRICATION AND TESTING OF DIESEL PARTICULATE FILTER FOR STATIONARY DIESEL ENGINE TO REDUCE PARTICULATE EMISSION

1488. FABRICATION OF ABRASIVE WEAR TESTER AND EVALUATION OF ABRASIVE WEAR RESISTANCE OF AL. ALLOY MMCS

1489. DEVELOPMENT OF ELECTROLESS, NICKEL-SILICON CARBIDE COMPOSITES

1490. A LOW COST DEVICE FOR THE PRODUCTION OF COUNTRY ROOFING TILES

1491. COMPUTER CONTROLLED DUAL PURPOSE MOBILE ROBOT

1492. WORKING MODEL OF A COMPUTER CONTROLLED PNEUMATIC EXCAVATOR

1493. PERFORMANCE OF DI-CI ENGINE BY USING BLEND OF HONGE OIL AND DIESEL FUEL

1494. MANUALLY OPERATED WATER LIFTING DEVICE

1495. VIBRO-THERMAL DISINFESTOR

1496. TRADITIONAL WATER HARVESTING TECHNIQUES OF RAJASTHAN

1497. ENERGY AUDITING OF SHARAVATI HOSTEL

1498. DESIGN AND FABRICATION OF BAMBOO SPLITTER

1499. REMOTE CONTROLLED MOBILE ROBOT WITH PESTICIDE SPRAYER

1500. PNEUMATIC JACKET

1501. SEED SOWING MACHINE

1502. SOLID MODELLING,DESIGN, FABRICATION OF TORQUE MOTOR & ITS INTERFACE WITH MICRO PROCESSOR FOR ELECTRO-HYDRAULIC SERVO SYSTEM & ITS TESTING

1503. DESIGN AND FABRICATION OF PNEUMATIC COMPARATOR

1504. HIGH QUALITY BRICKS USING COIR PITH

1505. COMPUTERIZED VECHICLE TRACKING SYSTEM USING RF TECHNOLOGY

1506. FLY-ASH-A RESOURCE MATERIAL FOR FLOORING TILES

1507. COMPUTER INTERFACING OF GENERATOR

1508. SOME MECHANICAL TESTS ON POLYPROPYLENE/BIOFIBRE COMPOSITES AND ALSO ANALYSING AGEING EFFECT ON MECHANICAL PROPERTIES

1509. RAILWAY ACCIDENT PREVENTION SYSTEM-A MODEL

1510. HIGH QUALITY BRICKS USING COIR PITH

1511. MICRO POWER PLANT

1512. DESIGN AND FABRICATION OF HEATING OF BIOGAS PLANT USING SOLAR ENERGY

1513. PNEUMATIC POWERED PNP ROBOT

1514. DISTILLATION OF WATER USING PARABOLIC SOLAR CONCENTRATOR

1515. AMPUTEE CYCLE

1516. PRODUCTIVITY IMPROVEMENT BY SCRAP HANDLING AND AUTO EJECTION SYSTEM

1517. ASSESSMENT OF A1-TI-B GRAIN REFINERS FOR THE GRAIN REFINEMENT OF AL-SI ALLOYS BY COMPUTER AIDED COOLING CURVE ANALYSIS (CA-CCA)

1518. SEPERATION OF HYDROGEN FROM WATER USING SOLAR ENERGY

1519. LPG GEYSER

1520. LOW COST OPTO-ELECTRONIC SMOKE METER

1521. PERFORMANCE STUDIES ON A DUAL FUEL CI-ENGINE WITH BIOGAS

1522. DETERMINATION OF DRYING RATE OF FRUITS AND VEGETABLES DURING DEHYDRATION USING SOLAR ENERGY

1523. PEDAL OPERATED PUMP

1524. SMART IRRIGATION

1525. DESIGN AND FABRICATION OF BREAKNIL EGG TRAY

1526. WIRELESS CONTROL OF FIRE EXTINGUISHER

1527. DESIGN AND FABRICATION OF PACKING CLIPS MAKING MACHINE

1528. ANALYSIS OF ROAD ACCIDENTS & REMEDIAL SUGGESTIONS

1529. SOLENOID OPERATED PNEUMATIC DIRECTION CONTROL VALVE INTEGRATED SHOCK TUBE FOR METAL FORMING OPERATION

1530. ANALYSIS OF SPRAY PATTERN AND IGNITION CHARACTERSTICS OF BLENDED FUELS TO BE USED IN C.I ENGINES

1531. FEASIBILITY STUDY OF INSTALLING HYDROTURBINES IN AND AROUND CHIKMAGLUR

1532. AIR CONDITIONING OF MOTOR VECHILE USING EXHAUST GAS HEAT

1533. AIR CONDITIONING OF MOTOR VEHICLE USING EXHAUST GAS HEAT

1534. DESIGN AND FABRICATION OF UNMANNED AIRSHIP

1535. DESIGN AND FABRICATION OF WALL SLIMBING ROBOT USING PNEUMATICS

1536. LOW COST LIFT

1537. DESIGN FABRICATION AND TESTING OF TAPER ROLLER BEARING TEST RIG

1538. MEASUREMENT OF THERMAL CONDUCTIVITY OF INSULATING MATERIAL (FABRICATION AND TESTING OF THERMAL CONDUCTIVITY MEASURING INSTRUMENT)

1539. FRIED VEGETABLE OIL AS BIO-DIESEL

1540. EDIBLE OIL AS AN ALTERNATIVE FUEL FOR I.C. ENGINE

1541. SOLAR WATER HEATING USING EVACUATED GLASS TUBE COLLECTOR

1542. FABRICATION AND TESTING OF SOLAR WATER HEATING SYSTEM USING HEAT PIPES WITH EVACUATED GLASS TUBE

1543. DESIGN AND FABRICATION OF VERTICAL AXIS WIND TURBINE

1544. ANALYSIS OF BIO-DEGRADABILITY OF POLYPROPYLENE PLASTIC ENFORCED WITH BIO-FIBERS TO REDUCE ENVIRONMENTAL POLLUTION

1545. DESIGN AND FABRICATION OF PROTOTYPE BIOGAS PLANT WITH NON CONVENTIONAL HEATING SOURCE

1546. ACCELERATED BIO-DGRADATION OF GLASS FIBRE REINFORCED POLYPROPYLENE COMPOSITES

1547. AUTOMATIC MULTIPURPOSE SEED DRILL

1548. TORSION TESTING ATTACHMENT ON UTM

1549. ANALYSIS OF BLOOD FLOW IN CAPILLARIES DURING PULMONARY HYPERTENSION

1550. STUDY ON HYDRAULIC SYSTEM OF LD CONVERTER AT LD#2 & SC

1551. A DEVICE FOR MAKING PACKING MATERIALS BY RECYCLING OF WASTE PAPER

1552. INCREASING THE EFFICIENCY OF SOLAR WATER HEATER USING ACETONE

1553. PERFORMANCE STUDIES ON HAMARA ST -5 STIRLING ENGINE

1554. PROJECTION OF LINES USING C-GRAPHICS

1555. COMPARATIVE STUDY OF EXPERIMENTAL STRESS ANALYSIS WITH F.E.M.

1556. ECO-FRIENDLY KITCHEN CHIMNEY

1557. INTELLIGENT ROUTE NAVIGATION SYSTEM

1558. PERFORMANCE EVALUATION OF SEMI-ADIABATIC C.I. ENGINE USING EDIBLE AND NON-EDIBLE OILS

1559. DISPENSING AND SEALING EQUIPMENT FOR POWDER FILLING

1560. DESIGN AND FABRICATION OF SOLAR DRIER

1561. DESIGN AND FABRICATION OF A QUAD BIKE QUADZILLA

1562. DESIGN AND FABRICATION OF DISH WASHER

1563. EXTRACTION OF BIO-DIESEL FROM SOLVENT WASTE OF VEGETABLE OIL

1564. EXTRACTION OF BIODIESEL FROM PONGAMIA OIL BY TRANSESTERIFICATION AND DISTILLATION PROCESS

1565. DESIGN AND FABRICATION OF PORTABLE EROSIVE-COROSIVE TEST SETUP FOR COMPOSITE MATERIAL

1566. PATIENT TRANSFER DEVICE

1567. VIBRO THERMAL DRIER AND DISINFESTOR

1568. A SURVEY ON THE AVAILABILITIES OF SOLID FUEL WASTES IN CHIKAMAGALUR DISTRICT

1569. TEST RIG DEVELOPMENT FOR THE USE OF VEGETABLE OILS IN CI ENGINES

1570. IGNITABILITY STUDY OF GLASS/COIR (HYBRID) FIBER REINFORCED POLYMER COMPOSITES

1571. DESIGN AND FABRICATION OF EVENTS COUNTER WITH CONVEYOR SYSTEM

1572. DESIGN AND FABRICATION OF GASIFIER

1573. FAILURE ANALYSIS,VALIDATION AND REDESIGN OF COMPONENTS OF A HYDRAULIC EXCAVATOR

1574. THE STUDY AND DEVELOPMENT OF SPIRAL BLADE PROFILE

1575. ENERGY AUDIT IN ARECANUT PROCESSING UNIT

1576. IDENTIFICATION OF ENERGY LOSSES IN JAGGERY INDUSTRY THROUGH AN ENERGY AUDIT

1577. DOMESTIC DISH TYPE CONCENTRATING COLLECTOR SOLAR COOKER CUM WATER HEATING SYSTEM USING AUTOMATIC TRACKING MECHANISM

1578. ROBOT ARM OPERATED BY BINARY ITERATIVE NAVIGATION

1579. AUTOMATIC RAIN SENSING WIPER AND AUTOMATIC DIM/BRIGHT HEAD LIGHT SYSTEM

1580. MECHANISM TO TRAP TRESPASSING VEHICLE

1581. DESIGN AND DEVELOPMENT OF SMALL SCALE OIL EXPELLER

1582. ENHANCEMENT OF EFFICIENCY OF SOLAR AIR HEATER USING ARTIFICIAL RIB ROUGHNESS ON THE ABSORBER PLATE

1583. EFFECT OF MOISTURE AND TEMPERATURE ON THE SPECIFIC HEAT OF BREAD

1584. NON-CONVENTIONAL AUTOMOBILE SERVICE LIFT

1585. VIBRATING PEANUT DIGGER

1586. RUMA CAR

1587. INTERGRAL HYDRAULIC PULLER AND INSTALLER

1588. TRANSESTERIFICATION OF NON EDIBLE OILS AND THEIR FEASIBILITY AS CI ENGINE FUEL

1589. DESIGN AND FABRICATION OF THE THREE WHEEL VEHICLE FOR HANDICAPS

1590. ELECTRIC SCOOTO

1591. MINI AIR VEHICLE

1592. INSTRUMENTATION FOR C-I ENGINE TESTRIG AND PERFORMANCE EVALUATION WITH AND WITHOUT PREHEATING BIO-DIESEL AS ALTERNATIVE FUEL

1593. ARECA NUT HUSK AS AN ALTERNATIVE FUEL

1594. AIR COOLER

1595. AERO WIND GENERATOR (HYBRID SYSTEM)

1596. PRODUCTION OF BIODIESEL FROM ALGAE

1597. DESIGN AND FABRICATION OF SOLAR STILL

1598. PERFORMANCE ANALYSIS OF IC ENGINE RUNNING ON DIESEL FUEL BLENDED WITH WASTAGE RESTAURANT OIL

1599. FOOD GRAIN CLEANING BY SUCTION METHOD

1600. DESIGN AND FABRICATION OF A MICROCONTROLLER BASED WHEEL CHAIR WHICH CAN BE UNFOLDED INTO A STRETCHER

1601. CHARACTERISATION OF BIOMASS FUELS IN AND AROUND TUMKUR

1602. GASIFICATION OF LANTANA

1603. CALCIUM PHOSPHATE POLYMER COMPOSITE FOR USE AS AN INJECTABLE BONE SUBSTITUTE WITH DESIGN OF DISPENSING TOOL/GUN FOR MIXING 2 ADHESIVES

1604. SOLAR REFRIGERATOR

1605. STUDY OF TOOL TIP TEMPERATURE PROFILE

1606. DESIGN AND DEVELOPMENT OF IMPROVISED FLOUR MILL

1607. VARIOMATIC DRIVE FOR BICYCLE

1608. DESIGN AND FABRICATION OF AN IMPROVISED EXPLOSIVE DEVICE HANDLING ROBOT

1609. PERFORMANCE COMPARISION OF CONVENTIONAL CORRUGATED TYPE SOLAR AIR HEATER WITH V-GROOVE

1610. POLLUTION CONTROL ISSUES OF SUGAR INDUSTRIES OF NORTH KARNATAKA-A CASE STUDY

1611. DEVELOPMENT OF ROBUST PRE-PROCESSOR FOR KINETIC UPWIND AND INCOMPRESSIBLE POTENTIAL FLOW USING PANEL METHOD

1612. EXPERIMENTAL INVESTIGATION OF HONGE OIL METHYL ESTER FUELED DI DIESEL ENGINE

1613. TRACKING OF SOLAR PANEL BY HYDRAULIC SYSTEM

1614. E-READINESS ASSESSMENT OF ENGINEERING COLLEGES

1615. DESIGN AND FABRICATION OF FRICTION DRILLING MACHINE

1616. STUDY AND ANALYSIS OF TORSION BOX OF WING OF TYPICAL AIRCRAFT

1617. EFFECT OF UNBALANCE IN BALL BEARING WITH DEFECT

1618. POWER OPERATED SUNFLOWER SEED DEHULLER

1619. HEAT RECOVERY FROM REFRIGERATION/AIR CONDITIONING UNIT

1620. INBUILT HYDRAULIC JACK FOR CARS

1621. STAIR LIFT (BATTERY POWERED)

1622. AUTOMATIC DISPENSING OF LIQUID INTO 2 DIFFERENT SIZE OF CONTAINERS

1623. PRODUCTION OF NANOCOATINGS FOR IMPROVED CORROSION RESISTANCE

1624. SOLAR POWERED/FOOT OPERATED WINNOWING MACHINE

1625. DESIGN AND DEVELOPMENT OF HAND LAY UP PROCESS SET UP FOR A FIBRE REINFORCED MONO LEAF COMPOSITE SPRING USED IN LIGHT DUTY COMMERCIAL VEHICLE

1626. DESIGN AND FABRICATION OF SMART WEAR TEST RIG FOR COMPOSITE BEARINGS

1627. WIRELESS DATA ACQUISITION FOR PROCESS INDUSTRY

1628. ELECTRO MECHANICAL REMOTE CONTROLLED SPY ROBOT

1629. THE PNEUMATIC APPLICATIONS

1630. MECHANICAL CHARACTERIZATION OF ARECA COMPOSITES-AN EXPERIMENTAL STUDY

1631. DESIGN AND FABRICATION OF ARECA DEHUSKING MACHINE

1632. AUTOMATED WINDOW CLEANER

1633. DESIGN AND FABRICATION OF HAND LEVER OPERATED PEDA MOULDER

1634. DESIGN AND FABRICATION OF MICROCONTROLLER BASED UTILITY VEHICLE

1635. DESIGN AND MULTI NUT TIGHTNER AND REMOVER FOR 4 WHEELER AUTOMOBILE

1636. FABRICATION AND RECIPROCATING WEAR TESTING MACHINE

1637. PREPARATION,ANALYSIS OF PHYSICAL PROPERTIES AND PERFORMANCE OF BIODIESEL IN CE ENGINE

1638. REMOTE CONTROLLED AIR DUCT CLEANER

1639. HYDROGEN AS AN ALTERNATIVE FUEL FOR IC ENGINES

1640. PREPARATION AND PERFORMANCE TEST OF KARANJA OIL

1641. WATER PURIFIER FOR DRINKING WATER USING SOLAR

1642. DESIGN AND FABRICATION OF BATTERY CONTROLLED WHEEL CHAIR

1643. AUTOMATIC SOLAR PANEL TRACKING SYSTEM,BY USING MECHANICAL DEVICES

1644. HYBRID GASIFIER

1645. DESIGN AND PERFORMANCE ANALYSIS OF PNEUMATIC ENGINE DEVELOPED FOR IC-ENGINE HYBRIDIZATION

1646. OPTIMIZATION OF DUAL PHASE STEEL

1647. EXPERIMENTAL INVESTIGATION OF RAW HONNE,DIESEL AND METHYL FORMATE FUELD DIESEL ENGINE

1648. PLATFORM SANITARY CODE ENFORCER FOR ONBOARD RAILWAY COACH

1649. DEFECT DETECTION IN SINGLE ROW DEEP GROOVE BALL BEARING USING FFT ANALYZER

1650. DEVELOPMENT AND FABRICATION OF PALLETIZING STATION WITH MECHATRONIC APPLICATION

1651. JOYSTICK CAR

1652. MULTI AXIS CUT OFF MACHINE WITH MILLING AND DRILLING ATTACHMENT

1653. RECYCLED PLASTIC INJECTION MOULDING

1654. DESIGN AND FABRICATION OF HYDRAULIC PVC PIPE TEST RIG

1655. FABRICATION AND TESTING OF DOUBLE TAPERED FRP COMPOSITE MONO LEAF SPRING FOR LIGHT DUTY AUTOMOTIVE SUSPENSION SYSTEM

1656. A STUDY OF EPOXY-EGLASS-NYLON6/6 LAMINATES UNDER DIFFERENT ENVIRONMENT CONDITIONS

1657. KITCHEN WASTE BASED COMPACT BIOGAS PLANT

1658. PREPARATION OF COMPOSITE MATERIALS AND STUDY OF VOIDS

1659. WEAR TESTING OF COMPOSITE MATERIAL MADE THROUGH R T M

1660. PREPARATION AND PROPERTY EVALUATION OF ALUMINIUM-HEMATITE COMPOSITE

1661. STUDY OF EFFECT OF AGEING HEAT TREATMENT ON ALUMINIUM METAL MATRIX COMPOSITES

1662. EXPERIMENTAL STUDY OF BIO-DIESEL AS A FUEL FOR WICK STOVE

1663. CYLINDER PRESSURE MODELING AND SPARK ADVANCE CONTROL IN FOUR STROKE SPARK IGNITION ENGINES

1664. CHARACTERIZATION AND PROPERTY EVALUATION OF RICE HUSK FILLED POLYMER MATRIX COMPOSITES

1665. EFFECT OF MATRIX AND COMPOSITE CURING TIME ON MECHANICAL BEHAVIOUR OF ARECA COMPOSITES-AN EXPERIMENTAL STUDY

1666. PRODUCTION OF BIOMASS BRIQUETTES BY ARECA NUT SHELLS AND ARECA NUT POWDER

1667. SEMI AUTOMATIC CLOTH WASHING MACHINE ATTACHED TO GYMNASIUM EQUIPMENT

1668. ZERO EMISSION VEHICLE

1669. PRODUCTION OF BIODIESEL FORM LOW COST FEEDSTOCK

1670. DESIGN AND FABRICATION OF COCONUT STICK REMOVER

1671. DESIGN AND FABRICATION OF SOIL MIXING AND FILLING MACHINE

1672. STUDIES ON REDUCING NOX THROUGH EXHAUST GAS RECIRCULATION AND ITS EFFECT ON PERFORMANCE OF A SINGLE CYLINDER STATIONARY DI DIESEL ENGINE

1673. EXPERIMENTAL ANALYSIS OF FLUID FLOW WITHIN A CALANDRIA BASED REACTOR

1674. DESIGN AND FABRICATION OF SLURRY WEAR TESTER

1675. STUDY OF DRY SAND ABRASIVE WEAR BEHAVIOR AND CORROSIVE PROPERTY OF HOT FORGED AI-6061 AND NI-P-TIO2 COMPOSITE FOR THE APPLICATION IN THE MANUFACTURE OF WINDMILL BLADES

1676. STUDY ON BIO-DEGRADABILITY OF POLYMER COMPOSITES AND ITS EFFECTS ON ENVIRONMENTAL POLLUTION CONTROL

1677. PASSIVE INDIRECT TYPE SOLAR-COCONUT DRYER

1678. DOMESTIC SOLAR WATER HEATER NY USING THERMAL FLUID

1679. A DEVICE TO EXTRACT POMEGRANATE SEEDS

1680. ENERGY CONSERVATION IN WASTE WATER RECYCLING

1681. IDENTIFYING ENERGY SAVING OPPORTUNITIES IN SUGAR INDUSTRIES THROUGH ENERGY AUDIT AND ENERGY MANAGEMENT

1682. MODELLING AND NUMERICAL ANALYSIS OF PARTICULATE COMPOSITES

1683. APPLICATION OF NEURAL NETWORKS TO GAS-SOLID FLUIDIZED BED USING MATLAB

1684. SEED COATING MACHINE

1685. VARIABLE FLUSH TANK

1686. POLLUTION CONTROL,PREVENTION OF FUEL WASTAGE AND ACCIDENTAL HAZARDS BY MINIMIZING THE UNNECESSARY USAGE OF TWO WHEELERS-(SURVEY)

1687. SOME INVESTIGATIONS ON EFFECT OF FILLER MATERIALS ON FIRE RESISTANCE OF POLYMER MATRIX COMPOSITES

1688. DEVELOPMENT OF JUTE ROVING REINFORCED EPOXY COMPOSITES AND STUDY OF THEIR EFFECT ON MECHANICAL PROPERTIES

1689. MODIFICATION ON KITCHEN WASTE BIOGAS PLANT AND ITS PERFORMANCE ANALYSIS

1690. QUICK CHAP-AN INSTANT CHAPATHI MAKER

1691. PHOENIX-AN ELECTRIC VEHICLE

1692. PERFORMANCE STUDY OF COMPRESSION IGNITION ENGINE USING METHYL ESTER OF WASTE VEGETABLE OIL AS A FUEL

1693. HYBRID NANO CAR

1694. STUDIES ON COEFFICIENT OF THERMAL EXPANSION OF GRAIN REFINED AL-SI ALLOY USING TIBAL AND ALSR AS GRAIN REFINERS

1695. EXPERIMENTAL INVESTIGATION OF DRILL GEOMETRY FOR BURR MINIMIZATION IN DRILLING

1696. CRASH SLIDING SYSTEM

1697. CONSTRUCTION OF AN AUTOMATED PACKING MACHINE

1698. ENERGY GENERATION USING FOOT STEPS

1699. IMPROVEMENT OVER EXISTING VAPOUR COMPRESSION REFRIGERATION TEST RIG

1700. PROXIMITY SENSOR BASED PROGRAMMABLE TURNING CENTER

1701. PROXIMITY SENSOR BASED PROGRAMMABLE TURNING CENTER

1702. EXPERIMENTAL STUDY ON MECHANICAL CHARACTERIZATION OF GLASS ARAMID POLYMER COMPOSITE

1703. DEVELOPMENT OF WEAR RESISTANT HIGH VELOCITY OXY-FUEL COATING ON SUPER ALLOYS

1704. ANALYSIS OF POLLUTION IN BANGALORE CITY USING ARTIFICIAL NEURAL NETWORK
1705.INVESTIGATION OF THE USE OF QUARRY DUST AS CONSTRUCTION MATERIAL

---

RECOVERY OF COPPER FROM CHITRADURGA WASTE COPPER TAILINGS
LASER SURFACE METING OF DUCTILE IRON

1. Mechatronic Strategies for Torque Control of Electric Powered Screwdrivers
2. Vegetable Cutter
3. Microbial Fuel Cells
4. Surface Lapping Machine
5. VANOS (Variable Nockenwellen Steuerung)
6. Online Analytical Processing
7. Antiskid System Of Supersonic
8. Quality function deployment
9. Piston less dual chamber rocket fuel pump
10. Scrubber
11. Hydroplanning
12. DEVELOPMENT OF AN AGV MATERIAL Development Of High Performance
13. Vacuum Chuck
14. Pneumatic based Intelligent Active Suspension system for two wheeler
15. Solar Agricultural Water Pumping System
16. Water Pumping system using Wind Power
17. Automatic steering control Mechanism using sensor
18. Automatic Acrylic Sheet Bending Machine (Heater Control)
19. Selective Plating
20. THE PNEUMATIC APPLICATIONS
21. IR controlled robot
22. Intelligent Braking System in Four Wheeler (IBS)
23. Mechanical Properties Of Mmcâ„¢s- An Experimetnal Envestigation
24. HEART BEAT PULSE PLOTTER MACHINE
25. REMOTE OPERATED PESTICIDE SPRAYER FOR ARECANUT
26. MINI ECONOMIC CAR
27. MultiJack Bolt Tensioners
28. COMPUTER INTERFACING OF GENERATOR
29. Two Stage Fuel Injection System
30. Fabrication of Electro-Magnetic braking System For Automobile
31. Steam Cars
32. Fabrication of Portable Service Unit
33. Vermi compost separator
34. Thermostatic Refrigerator
35. Electrical Power generation using Railway Track
36. DESIGN AND FABRICATION OF A COMPUTER CONTROLLED AUTOMATIC SPRAY PAINTING ROBOT
37. MAGNETIC SHOCK ABSORBER AND GENERATION OF ELECTRIC USING SHOCK ABSORBERS
38. Automatic Water level Sensing Crane
39. Multi-Purpose Ground Dryer (or) Multi-Purpose Dryer and Room Heater
40. Future car concept (Basic)
41. Electromagnetic Embossing machine
42. Emergency Braking System in Four Wheeler (EBS)
43. D & F of Pneumatic Four-Axis Material Handling Equipment
44. Fabrication of Solar Air Conditioner
45. Automatic paint spraying pick and place Equipment
46. Power Saving System for Lathe
47. Load tests and many other tests on composite material (for automobile industries)
48. D & F of Involute Gear Profile Error Detector
49. How To Increase Starting Torque Of A Locomotive
50. Effect Of Stacking Sequence On Notch Strength In Laminates
51. Family tables & relation using CATIA
52. Active Front Lighting System
53. PC BASED HEIGHT MEASUREMENT TOOL:
54. TOFFEE/PACKET VENDING MACHINE:
55. Marine electric propulsion
56. Vibration Analysis Of Flywheel Using Finite Element Analysis
57. Therrmophoresis
58. EXTRACTION OF BIODIESEL FROM PONGAMIA OIL BY TRANSESTERIFICATION AND DISTILLATION PROCESS
59. D & F of Pneumatic Auto Feed Drilling Machine
60. Recent Advances In Statistical Quality Control
61. Natural Air cooler (Non Conventional energy based)
62. Fabrication of Two Wheeler Automation with Security System
63. Fabrication of Motorized Crane
64. Emission Control Techniques
65. Types Of Tires
66. Types Of Bearing
67. Automatic Birds scrarer Machine
68. Electronic assisted hydraulic braking system
69. Robotic Assistants For Aircraft Inspectors
70. A FLUID-SOLID INTERACTION MODEL OF THE SOLID PHASE Epitaxy In Stressed Silicon Layers
71. PC BASED EARTHQUAKE PROOF BUILDING:
72. Plant Layout (Study)
73. Mechanosynthesis
74. Micro-Scale Milling
75. CONSTRUCTION OF AN AUTOMATED PACKING MACHINE
76. Launching Space Vechicles from Moon
77. Efficiency increasing system in automobile
78. Testing of Welds
79. MANUALLY OPERATED WATER LIFTING DEVICE
80. Solar Powered Automatic Rain Operated Wiper
81. Microengines for microprocessors
82. Fabrication of potato chips making machine
83. Transformer heat reduction system
84. Fabrication of Detra fan for Industrial Application
85. Software Based Reengineering
86. Liquified Natural Gas
87. Computer Modelling
88. Quality Function Deployment (QFD) For Total Quality Management
89. WORKING MODEL OF A COMPUTER CONTROLLED PNEUMATIC EXCAVATOR
90. Gauges
91. CONDITION MONITORING OF BEARINGS BY ECHO PULSE METHOD
92. Magnetorhilogical Semi-isolator to reduce noise and vibration transmibility to automobile
93. SMS controlled solar Vehicle
94. Fabrication of Automatic Pneumatic Hammer
95. Conditional monitoring & fault Diagnosis
96. DESIGN AND FABRICATION OF A MICROCONTROLLER BASED WHEEL CHAIR WHICH CAN BE UNFOLDED INTO A STRETCHER
97. MICROPROCESSOR LINEAR TEMRATURE CONTROLLER
98. D & F of two stage Self Primary Pump
99. Fabrication of hydraulic operated adaptive breaking system
100. DESIGN FABRICATION AND TESTING OF TAPER ROLLER BEARING TEST RIG
101. Warm Gas Thruster Development Useing Gaeous Hydrogen And Oxygen With Catalytic Ingintion
102. Hologram
103. PC controlled winding machine
104. Thermal Conductivity Of Poros Material
105. NANOTECHNOLOGY FOR CANCER THERAPY
106. Automatic high speed Bottle Washing Machine
107. Automatic sensor based wall painting robot
108. Fabrication of Automatic Electro hydraulic Jack
109. Automatic pneumatic vulcanizing Machine using heat sensor
110. Fabrication of Non conventional Air compressor
111. FABRICATION OF ABRASIVE WEAR TESTER AND EVALUATION OF ABRASIVE WEAR RESISTANCE OF AL ALLOY MMCS
112. Bioreactors
113. Space Shuttle
114. Constitutive Modelling of Shape Memory Alloy Using Neural Networks
115. Automatic temperature controller with cooling system for car
116. Application Of Cryotreatment
117. Distribution Side Management For Urban Electric Utilities In India
118. Complex System Development
119. Applications Of Micro-Controller In Auotomobile
120. Fabrication of Smart shock absorber
121. DESIGN AND FABRICATION OF BAMBOO SPLITTER
122. F Track Design And Safety
123. Fabrication of solar powered remote controlled weapon system
124. Near Net Shape Fabricatons Via Vacuum Plasma Spray Forming
125. Fabrication of Floor Cleaning Machine
126. Study Of Biodegradation Of Polyesters
127. Fabrication of Hybrid Vehicle
128. Magnetic refrigeration
129. Fabrication of Solar Power Generation With Auto Tracking
130. OPTIMIZATION OF DUAL PHASE STEEL
131. Wind Mill Power Generation System
132. Solar Aircraft
133. Fabrication of mantles defense
134. Hydrodynamids & gas liquid
135. D & F of Multi-Engine Air Compressor
136. Solar Multi-Purpose Sprayer (or) Solar Seed and Fertilizer Sprayer
137. Micro Pumps
138. Bicycle Floor Mill
139. Catalytic Converters
140. PC based wireless solar powered vehicle
141. Liquid Injection Thrust Vectoring (LITV)
142. Noise Analysis For Optical Fiber Communication Systems
143. COMPRESSOR LESS THERMO-EMF REFRIGERATOR:
144. Development In Arc Welding Process Using Robot
145. Turbofan Engines
146. Low Gloss ABS system
147. Heat recovery steam generator (HRSG)
148. Failure Analysis of Lap & Wavy-Lap Composite Bonded
149. SOFTWARE DEVELOPMENT ON SPUR GEARS TROUGH COMPUTER AIDED ANALYSIS
150. In Mould Lamination Technique
151. CASCADE SYSTEM OF SOLAR COLLECTOR
152. Portable Power
153. Energy Conversion and Management
154. EXPERIMENTAL DERERMINATION OF THERMAL CONDUCTIVITY OF VEGETABLES AND FRUITS
155. Indian Manufacturing Scenerio
156. Fabrication of Dosai Maker
157. Hydrogen Fuel Tank
158. Fabrication of Electric Two Wheeler with Rechargable Battery
159. Transfer Machines
160. Solar powered tea leaf cutting machine
161. All- wing Technology
162. Highways high speed indication and Automatic Pneumatic Braking System
163. Fabrication of Sub-Marine (Model)
164. Pasteurization
165. Lean Manufacturing
166. TRANSESTERIFICATION OF NON EDIBLE OILS AND THEIR FEASIBILITY AS CI ENGINE FUEL
167. Micro-Electromechanical Systems
168. PREPARATION OF COMPOSITE MATERIALS AND STUDY OF VOIDS
169. Machine Vision
170. Namotechnology Shaping the future
171. D & F of Activated Carbon Manufacturing Plant
172. Hydraulic free pistan engine
173. A Study Of A Displacement Amplifier
174. D & F of Pneumatic High Speed Hack Saw Machine
175. Friction Welding Of Austenitic Stainless Steel And Optimizatin Of Weld Quality
176. Fabrication of Seeds Sprayer
177. Fuel Cell Airplane
178. Fabrication Automatic differential unit locking System
179. D & F of Mini Hydraulic Press
180. Automatic Power Saving Conveyor for Industrial Application
181. INNOVATION IN AUTOMOBILE INDUSTRIES
182. Industrial Boiler Flame Remote Adjustment System
183. Condition Monitoring Through Vibration Measurement
184. Rocket Powered Aircraft
185. Electric Automobiles
186. Automatic reserve indication system
187. AEMS automotive engine management system using Meqa Squirt Kits
188. Opto-Electronic Sensor System
189. Effect Of Pressure On Arc Welding Process
190. Active roll-over protection system in Automobiles
191. DEVELOPMENT OF ELECTROLESS, NICKEL-SILICON CARBIDE COMPOSITES
192. HalBach array
193. DESIGN AND DEVELOPMENT OF HAND LAY UP PROCESS SET UP FOR A FIBRE REINFORCED MONO LEAF COMPOSITE SPRING USED IN LIGHT DUTY COMMERCIAL VEHICLE
194. Jelly Filled Telephone Cables
195. Boimetrics: An Unparelled Security Check System
196. Aero plane Controlling System (Flying Model)
197. Return Of Two Stroke Engine
198. Automatic Packing control Machine
199. Bicycle Water Pump (Centrifugal)
200. Torque And BHP
201. New Age Tyres()
202. Jatropa oil- Alternative fuel
203. D & F of Pneumatic Automatic Printing Press
204. Infrared
205. Process Steam Generation
206. Sensor Operated Automatic Reverse Braking System
207. STUDIES ON COEFFICIENT OF THERMAL EXPANSION OF GRAIN REFINED AL-SI ALLOY USING TIBAL AND ALSR AS GRAIN REFINERS
208. WANKEL ENGINE
209. Tabletop Thermoacoustic Refrigerator For Demonstrations
210. Digital manufacturing
211. Automatic Break Failure and Engine Over Heating Indication
212. Fabrication of Automatic Sofa Comports
213. Stereoscopic Projection Systems
214. Guided Missile
215. Dose Evaluation In Moving/Deforming Anatomy: Methods And Clinical Implications
216. Weber Carburetors
217. COMPRESSOR BASED SPRAY GUN:
218. AUTOMATIC DISPENSING OF LIQUID INTO DIFFERENT SIZE OF CONTAINERS
219. Autonomous Submarines
220. DESIGN AND FABRICATION OF A PICO-HYDEL TURBINE
221. Rubber
222. Intelligent Way Searching Pick and Place Robot
223. Computer Aided Production Engineering (CAPE)
224. Semi automatic transmission
225. Fabrication of Pneumatic Ball Printing Robot
226. Active Electrically Controlled Suspension
227. Shaft speed differential (different design but same idea as automotive axel differential)
228. Heat caps
229. PC BASED JOINT ASSEMBLY PROJECT:
230. Six Sigma
231. Natural Water cooler (Non Conventional energy based)
232. EFFECT OF DUAL IGNITION AND LEANING OF THE MIXTURE ON THE PERFORMANCE AND EMISSION OF A SAMALL CAPACITY S S IGNITION ENGINE
233. D & F of Multipurpose Pneumatic Pressing Machine
234. Fabrication of Agricultural Motor Pump Running using Solar Power
235. Regenerative braking
236. LPG GEYSER
237. COAL GASIFICATION
238. Multipurpose Cooler
239. Packaging
240. Snake Well Drill
241. Fabrication of queries controlling system for two wheeler
242. Fabrication of Solar Hybrid Car
243. Fabrication of thermo-electric solar air conditioner
244. Hy-Wire Car()
245. INDUCTION BRAKING:
246. Fabrication of Pneumatic -axis JCB Equipment
247. Automatic Car Parking System for apartment Building
248. Super Air Nozzles
249. Automated MIG weld torch cleaner (all on the market are [censored], million dollar idea)
250. Conversion of tap or Salty bore well water into purest, tastiest bottled Quantity Drinking Water
251. Pneumatic Operated Chapathi Making Machine
252. Fabrication of Cooling tower
253. SIMPLIFIED HYDRAULIC PRESS
254. Fabrication of solar Water Heater
255. Fabrication of Automatic Pneumatic Bottle Washing machine
256. Turbine Technology In Car
257. Aspheric lenses
258. REMOTE CONTROLLED AIR DUCT CLEANER
259. Fabrication of Lawn Mover
260. Oil well drilling
261. Micro Fluidic Chips
262. DESIGN AND FABRICATION OF GO KART
263. Fabrication of Pantograph Universal Gas Cutting Machine
264. Wind energy turbine
265. Centrifugal Compressors
266. AUTOMATED WINDOW CLEANER
267. SOME MECHANICAL TESTS ON POLYPROPYLENE/BIOFIBRE COMPOSITES AND ALSO ANALYSING AGEING EFFECT ON MECHANICAL PROPERTIES
268. Fabrication of Remote Operated Belt Conveyor
269. LAPPING MACHINE:
270. MECHANICAL CHARACTERIZATION OF ARECA COMPOSITES-AN EXPERIMENTAL STUDY
271. Sensor Operated Auto feed Punching Machine
272. Robotic roller coasters
273. DEVELOPMENT AND CHARACTERISATION OF JUTE REINFORCED POLYESTER COMPOSITES
274. Versatile robotic arm
275. IC Engine (Internal Combustion)
276. Fiber-Optic Telecommunication And The Economic Benefits
277. Combustion Control Using Optical Fiber

ELECTRICAL ENERGY FROM SPEED BREAKER

hi
for more details on 'ELECTRICAL ENERGY FROM SPEED BREAKER' , please visit:
http://studentbank.in/report-power-gener...ed-breaker

Smart Solar Tracking System For Optimal Power Generation
• Automatic Electrolyte Battery Filling Using Conveyer System
• GPS Based Intelligent Guided Vehicle With Collision Mitigation

If you're interested in object motion and enjoy taking mechanical objects apart to see how they work, then it sounds like you'd be interested in mechanical engineering. Check out one of the science fair project ideas below and you could find exactly what you're looking for. Here are a few of the topics that are covered:

* Projectile launches, such as the trajectory of cannonballs
* Springs, levers, and mechanical mechanisms
* Stability, equilibrium, momentum, and inertia of various systems; for example, the results of differently shaped objects rolling down an incline
* How different surface types affect motion

thank you kevinpeter.

Solar Thermal Power Plant using Organic Rankine Cycle

to get information about the topic Mechanical Engineering Project Ideas List full report ,ppt and related topic refer the page link bellow

http://studentbank.in/report-mechanical-...ideas-list

http://studentbank.in/report-mechanical-...ect-topics

http://studentbank.in/report-mechanical-...ject-ideas

http://studentbank.in/report-mechanical-...g-projects

http://studentbank.in/report-mechanical-...r-students

http://studentbank.in/report-mechanical-...ect-1-list

http://studentbank.in/report-mechanical-...eas?page=2

http://studentbank.in/report-mechanical-...ist?page=7

---