KALPATARU POWER TRNSMISSION LIMITED
#1
Thumbs Up 

[attachment=7404]
KALPATARU POWER TRNSMISSION LIMITED



BACKGROUND
KALPATARU POWER TRNSMISSION LIMITED, situated in Gandhinagar, Capital of Gujarat State in Western India, is a part of the KALPATARU GROUP, which has vast experience and in Real Estate and property development, Power Transmission Towers, Plastic films and Sheets, Stationary / office supplies and international trading etc. KALPATARU was formerly known as H.T. Power Structure Ltd. (HTPS)
KALPATARU is one of the reputed International Engineering Companies engaged in Design, Testing, Manufacturing and Supplying Of Transmission Line Tower up to 800 kV and is also engaged in Construction of Transmission Line of up to 800 kV on total turnkey basis. The brief of details of KALPATARU are as under:

 Year Of Establishment: 1981
 Turn over: US$ 150
 Year 2007-08 Installed: 54,000 MT
 Capacity Land Area: 48000 Sq. Meter.
 Number Of Employees: 400

Export to countries Domestic customers:
INDIA:
Power Grid Corporation of India Limited (PGCIL)
 STATE ELECTRICITY BOARDS:
 MSEB , Maharashtra
 GEB ,Gujarat
 RSEB , Rajasthan
 TNEB ,Tamil Nadu
 APTRANSCO, A.P.
 GRIDCO, Orissa
 KPTCL, Karnataka
 MPEB, Madhya Pradesh
 OVERSEAS:
 NPC, Nepal
 PEEGT, Syria
 EGAT, Thailand
 POWERLINK, Australia
 HEC, Tasmania(AUS)
 CFE, Mexico
 PT.PLN, Indonesia
 TNB, Malaysia
 EVN, Vietnam
 U.S.A
 QATAR
 OMAN

2. MAJOR RECOGNITIONS FOR KALPATARU

KALPATARU has executed and is executing contracts for various International ECP contractors including ABB SAE-Italy,
ABB-Australia, Alston -France, COBRA- Spain, ETA-UAE,
Etc. Few of these clients have awarded repeat contracts to KALPATARU, which acknowledges the satisfaction and confidence level of these clients with KALPATARU.
KALPATARU is having “Export House” status duly recognized by Ministry of Commerce, Government of India.
KALPATARU has received following Awards for the excellence in Exports.

 “Certificate of Export Excellence” for the year 1995-96 on All India Basis from Engineering Export Promotion Council.
 “Certificate of Merit” from the Government of India Ministry of Commerce and Industry for outstanding Export
Performance during the year 2003-04
 Award for the “Highest Growth in Exports for the year 2004-05” on All India Basis, from Engineering Export Promotion Council.
 Regional Award from M/s CONCOR India for highest regional exports.
 “ISO 9001:2000 Certification” in the year 2004.
 “ISO 14001:2004” Whish was received in March-06
3. DESIGN AND ENGINEERING DIVISION
Engineering department is headed by a Vice-President having over 23 years of experience in transmission line designs.
The department has strength of over 30 persons comparing of Asst. General Managers, Engineers, Draftsmen, and other Technical staff with average experience of over 10 Years.
KALAPTARU adopts latest technology for carrying out its design, drawings and other related activities .Computers
Are extensively used for all its activities .In-House design programs for Space Frames analysis (3D) as well as Plane Frame analysis (2D) have been developed .Internationally reputed STAAD-III packages is also used for developed designs.
Drawings are developed on AUTO-CAD, BOCAD, IT-Tower, PLS Tower, PLS CADD, STAAD, and With the In-House interactive programs, this fabrication drawing converted into CNC machine data for fabrication.

 There are two main machines in which production is carried out
1) Manual Line
2) CNC line

 Manual Line carries Machine Like
 Straightening Machine
 Punching Machine
 Stamping Machine
 Edge cutting

 CNC line carries Machines
CNC machine which is carried out three operations in one Machine.
Three Operations in one M/c
 Stamping Operation
 Punching Operation
 Shear Cutting Operation

 ZINC COATING Plant (section)
Zinc is used for coating purpose.
This section carries
 Na OH Bath
 HCL bath



 Material Handling Equipment
 Cranes(10) (5 Mt)
 Crane Trucks
 Magnetic Cranes
 Various Machine Use
 CNC Machines
 Drilling
 Milling
 Shearing
 Special Purpose Machine
 Hydraulic Presses
 Straightening Machine
 Hydraulic Notching
 Sheet Shearing M/c
 Pilot M/c
 Copying M/c
(A) Mechanical Pressure Straightening Machine
It is manufactured by Radicand Company.
This M/c used for Straightening of angle plate.
• This M/c contains two rollers
• Upper rollers
Upper Rollers are adjustable with help of wheel provide the rollers. They are also adjustable as per as the thickness of the angle plate
• Lower rollers
Lower rollers are driven by electrical motor. They are fixed. They are rotated by electrical motor.
As the plate is passed between two rollers the upper rollers are also rotated.
• Capacity of this M/c is 40*40*3
• Max capacity 110* 6
• Four persons are required on this on this Machines

(B) Mechanical Pressure Shear cutting Machine
In this machine Mechanical pressure is used for cutting purpose. As per length of work piece is cut the fixture is fixed on the Jig. Lever is provided for the movement of cutting edge.
© Hydraulic Stamping M/c
In this M/c Hydraulic pressure is used for stamping purpose.
(D) Mechanical Pressure Punching Machine
This M/c is used for punching the hole.
Stud is used for producing holes at different position.
(E) Edge Cutting Machine
 This M/c is driven by hydraulic pressure
 For cutting angle edge this Machine is used.
 Fixture is fixed on the Jigs as per the angle to be cut.

MATERIAL, FABRICATION, GALVANISING, BANDING, INSPECTION AND STORAGE
Material Quality control
Various grades of steel used in towers details of section, bolts and nuts and other accessories, need a detailed scrutiny and quality control procedure before being processed for fabrication, assembly etc.
Annexure 1 and 2 give chemical composition and mechanical properties of mild steel and high tensile steel used in towers. Annexure 3 (a) to © gives sectional details and properties of hot-rolled angle and channel sections.
Annexure 4 gives unit weights of plates of all sizes. Annexure 5 and 6 give dimensions of hexagon bolt and their mechanical properties respectively. Annexure 7 gives the properties of anchor bolts.
A well planed and executed quality assurance program is necessary to ensure delivery of acceptable material in a timely manner. Appendix 1 is a typical quality assurance plan giving details of the various processes, indicating process controls the various steps that are followed progressively at various stages of production to ensure right product as per the specification.
PRODUCTION CONSISTS OF THREE SECTION
1. FABRICATION
2. GALVANISING
3. BENDING



 FABRICATION
KALPATARU has a single plant at Gandhinagar in Western India with an installed capacity of 54000 MT, which is second largest single unit in India.
The plant is equipped with most modern and sophisticated machinery including Computerized Numerical Controlled (CNC) machines for drilling, punching, cropping and stamping.
CNC machines installed in the plant are purchased from FICEP, Italy and are used most effectively with least down time with available in-house industrial engineering know how.
For better quality and efficiency, KALPATARU’s plant in addition to CNC machine is equipped with automatic coping machines, Plate shearing machines and milling machines, which work to perfection.
 GALVANISING
The plant has in-house galvanizing facility for carrying out hot dips Galvanizing.
The galvanizing plant is equipped with galvanizing bath having dimensions of 8M length with 2.4 M depth and 1 M width.
This is specially designed to dip shorter pieces vertically for higher productions and also maintain the critical temperature band, which is essential to get good and uniform zinc coating.
High velocity burners and automatic temperature control equipments are installed to maintain the required steady temperature.
The tower members, bolts/nuts and other accessories should be hot-dip galvanized and the spring washers electro-galvanized.
Galvanizing should be done in accordance with IS: 2629-1985, after the fabrication and the inspection at black stage is complete. The nuts may be re-tapped after galvanizing so that these are “hand-free” on the galvanizing bolts.
The galvanizing procedure and its in-process inspection are given in “QAP” (Quality Assurance Plan)—Appendix
1. The galvanizing bath should be reasonably free from dross.
Chemically cleaned steel (after pre-treatment) should be dipped in molten zinc carefully.
On removal from the kettle the galvanized material may have excess shelter which may be removed from the surface by bumping or wiping.
The temperature of the shelter in the kettle shall be controlled within close limits by means of accurate pyrometers.
Reply
#2
where is this company?
Reply
#3

Gandhinagar, Capital of Gujarat State in Western India

for more read the report
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: mail kalpataru como owa, rseb bhiwadi, outlook kalpataru, power trnsmission without wire, recognitions, https mail kalpataru com owa, kalpataru mail,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  someone with pecuniary common vindication or someone who power 0 415 09-09-2019, 06:23 AM
Last Post:
  someone with economic orthodox justification or someone who power 0 555 08-09-2019, 07:20 AM
Last Post:
  vijayawada thermal power station internship contact details 0 853 17-10-2018, 11:36 AM
Last Post: Guest
  foot step power generation system wikipedia 0 707 02-10-2018, 12:50 PM
Last Post: Guest
  vijayawada thermal power station internship contact details 1 876 01-10-2018, 04:41 PM
Last Post: Guest
  power plant engineering by rk hegde pdf 0 2,121 27-09-2018, 09:59 AM
Last Post: Guest
  seminar report on limited slip differential pdf 0 739 25-09-2018, 11:59 PM
Last Post: Guest
  how to apply for apprentice training in mettur thermal power station 1 923 17-08-2018, 09:28 PM
Last Post: challurirakesh
  suratgarh thermal power plant internship report 0 581 15-08-2018, 11:00 PM
Last Post: Guest
Lightbulb circuit diagram of power saver for industrial and commercial establishments 0 671 15-08-2018, 02:22 PM
Last Post: Guest

Forum Jump: