Hi,
I want ieee paper on accident alert with automatic dialer topic.
Posts: 14,118
Threads: 61
Joined: Oct 2014
The project titled “Accident Alert with Automatic Dialer ECE Project” has designed an accident alert system that can scrutinizes automotives/ vehicles.The generations of cars that are developed in the market have been creatively designed so as to reduce the risk of accidents. Ideas such as alarm systems and control devices have been formulated which have increased the safety factor.
accident-alert-with-automatic-dialer-ece-projectVehicles which are very big face problems sometimes as there are spots from the driver’s seat which cannot be seen. Also, conditions like fog disable the visibility rate which is also an accident causing factor. This project not only prevents accidents but also informs the emergency if at all accidents are caused.
The project Accident alert with automatic dialler makes use of glass breakage sensor that detects glass breakages. A smoke detector in the vehicle shows the presence of smoke caused by fire in the vehicle. Both the sensors transmit a signal to the microcontroller. To the microcontroller, a DTMF chip is attached and onto this a telephone unit is interfaced. Through this mechanism accident alert is transmitted.
At times, one of the lights of a four wheeler might not be working due to some problem. This makes four wheeler look like a two wheeler. This factor causes accidents. Hence to avoid such problems, a proximity detector is incorporated in the circuit which alerts the driver about vehicles passing in its close range.
Conclusion:
This project can be best applied in vehicles especially those which travel long distances and highways. By applying high technology, add-on features could be added. The most important advantage that the project offers is sophisticated security that takes care of potential hazards and threats. The driver could be alerted by means of an alarm that would aid him to act quickly in case of a problem.
Posts: 6,843
Threads: 4
Joined: Mar 2015
This is a good Electronics and Communication project report on Accident Alert with Automatic Dialer and is designed to prevent the accident and to inform emergency about an accident that has occurred. This project uses a glass breakage sensor that detects breakage of glass and smoke detector that detects any smoke due to fire in the vehicle. These sensors send a signal to microcontroller. A DTMF dialler is connected to the microcontroller. A basic telephone unit is interfaced to the DTMF dialler chip that sends call to the predefined mobile or emergency number and informs about this accident. You can also Subscribe to FINAL YEAR PROJECT'S by Email for more such projects and seminar.