ieee paper for street light that glows on detecting vehicle movement
#1

I need proper guidelines ,report and all the information about it .
Reply
#2
Generally, the street lights are turned on all night and during the day, they go out. But during the night, street lights are not necessary if there is no traffic. Saving this energy is a very important factor these days as energy resources are being reduced day by day.

The alternatives for natural resources are much lower and our next generations can face many problems due to the lack of these natural resources. We have already seen the circuit diagram and the operation of the automatic intensity control of the street lights in the previous post. This article describes about the circuit that changes the street lights in the vehicle's motion detection and remains off after fixed time.

Principle behind this circuit

The proposed system consists of Atmega8 microcontroller, LDR, PIR sensor and RTC. This system controls the street lights using a light dependent resistor and a PIR sensor.

The street lights turn on depending on the intensity of sunlight in LDR. If the intensity of sunlight in the light-dependent resistance is low, its resistance value is high. This value increases and becomes high when it is completely dark. This resistance value decides when to turn on street lights.

As the resistance value is maximum in the half-way, the real-time clock comes into play. The controller controls the peak time during which there is no traffic and turns off the lights. When there is a vehicle on the road, it is detected by the PIR sensor.

Whenever the PIR sensor is detected it only indicates that the microcontroller to turn on the street lights. The lights turn on for 2 to 3 minutes and turn off automatically.

Another way to this approach is, one can maintain minimum intensity without completely turning off the lights using PWM and to turn them on at maximum intensity each time the vehicle is detected. But in this article the circuit is designed in such a way that the lights are completely off and will light only when there is any vehicle.

Circuit diagram

[Image: Street-Lights-That-Glow-on-Vehicle-Movem...68x402.jpg]
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: ieee paper for street light glows on detecting vehicle movement base paper, ieee reserch paper on digital light process, introduction to a seminar paper to the topic of swadeshi movement, ieee paper for street light that glows on detecting vehicle movement,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Eyeball movement based Wheelchair Monza 0 586 15-01-2023, 03:50 AM
Last Post: Monza
  Jti(tisco exam paper) 0 660 20-01-2021, 06:15 PM
Last Post:
  BCA 2nd Year All Paper 0 1,242 23-01-2020, 02:00 AM
Last Post:
  Need Doc for Vehicle Investigation System 0 753 04-01-2020, 01:37 PM
Last Post:
  How there celebrating light of unified's living not later than paying it cheeky 0 513 18-10-2019, 07:47 PM
Last Post:
  code for avr atmega16 with gsm 900 to control light 2 1,010 24-01-2019, 12:03 PM
Last Post:
  i need sanmar apptitude question paper 0 3,817 03-01-2019, 05:47 PM
Last Post:
  matdip301 solved question paper in pdf 1 2,314 16-12-2018, 09:33 AM
Last Post:
  vidyarthi mitra kannada news paper today 0 905 25-10-2018, 04:48 PM
Last Post: Guest
  go kart design report in ieee format 0 6,147 06-10-2018, 04:21 PM
Last Post: Guest

Forum Jump: