Hybrid ARQ
#1

Hybrid ARQ (HARQ) is a variation of the ARQ error control method, which gives better performance than ordinary ARQ, particularly over wireless channels, at the cost of increased implementation complexity.

The simplest version of HARQ, Type I HARQ, simply combines FEC and ARQ by encoding the data block plus error-detection information (such as CRC) with an error-correction code (such as Reed-Solomon code or Turbo code) prior to transmission. When the coded data block is received, the receiver first decodes the error-correction code. If the channel quality is good enough, all transmission errors should be correctable, and the receiver can obtain the correct data block. If the channel quality is bad and not all transmission errors can be corrected, the receiver will detect this situation using the error-detection code, then the received coded data block is discarded and a retransmission is requested by the receiver, similar to ARQ.

In practice, the incorrectly received coded data blocks are often stored at the receiver rather than discarded, and when the retransmitted coded data block is received, the information from both coded data blocks are combined (Chase combining) before being fed to the decoder of the error-correction code, which can increase the probability of successful decoding. To further improve performance, Type II/III HARQ, or incremental redundancy HARQ, has also been proposed. In this scheme, different (re)transmissions are coded differently rather than simply repeating the same coded bits as in Chase combining, which gives better performance since coding is effectively done across retransmissions. The difference between type III HARQ and type II HARQ is that the retransmission packets in Type III HARQ can be decoded by themselves.

An example of incremental redundancy HARQ is HSDPA: the data block is first coded with a punctured 1/3 Turbo code, then during each (re)transmission the coded block is (usually) punctured further (i.e. only a fraction of the coded bits are chosen) and sent. The punctuation pattern used during each (re)transmission is different, so different coded bits are sent at each time.

HARQ can be used in stop-and-wait mode or in selective repeat mode. Stop-and-wait is simpler, but waiting for the receiver s acknowledgement reduces efficiency, thus multiple stop-and-wait HARQ processes are often done in parallel in practice: when one HARQ process is waiting for an acknowledgement, another process can use the channel to send some more data.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: arq protocols, selective repeat arq implementation in java, hybrid finanacing, select report arq in opengl, program on selective arq, hybrid cimney, hybrid,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  A Hybrid Disk-Aware Spin-Down Algorithm with I/O Subsystem Support computer girl 0 1,065 07-06-2012, 04:01 PM
Last Post: computer girl
  Analog-Digital Hybrid Modulation for Improved Efficiency over Broadband Wireless Syst electronics seminars 8 5,293 13-03-2012, 10:23 AM
Last Post: seminar paper
  Hybrid Routing Protocols seminar addict 0 786 10-01-2012, 01:34 PM
Last Post: seminar addict
  ARQ Protocols seminar class 0 1,650 09-04-2011, 10:22 AM
Last Post: seminar class
  A HYBRID DATA COMPRESSION SCHEME FOR IMPROVED VNC seminar class 0 919 23-03-2011, 03:45 PM
Last Post: seminar class
  Dynamic Data Reallocation in Hybrid Disk Arrays summer project pal 0 1,257 29-01-2011, 07:44 PM
Last Post: summer project pal
  Malware Detection based on Dependency Graph using Hybrid Genetic Algorithm science projects buddy 0 1,440 28-12-2010, 11:41 PM
Last Post: science projects buddy
  Low-Power High-Speed Hybrid CMOS Full Adder for Embedded System project report helper 0 1,641 15-10-2010, 02:59 PM
Last Post: project report helper
  Exponential Synchronization of Hybrid Coupled Networks With Delayed Coupling project report helper 0 1,005 13-10-2010, 03:22 PM
Last Post: project report helper
  Hybrid Tracking of Human Operators using IMU/UWB Data Fusion projectsofme 0 860 25-09-2010, 09:52 AM
Last Post: projectsofme

Forum Jump: