24-11-2012, 12:07 AM
The Z-200 unit allows almost any number of analogue or
digital input values to be wirelessly transmitted to a remote
receiver with either analogue 4-20mA, 0-10V , Ethernet or
RS232 outputs.
The transmitter unit has one universal analogue input but the
system can be expanded through the use of the optional
slice I/O modules.
These modules connect automatically via the DIN rail
mounted bus connector allowing the easy addition and
removal of extra I/O.
The built-in display allows local monitoring of the individual
inputs and outputs, a useful commissioning and operations
tool.
The Z-200 has typically two uses:
1) To transmit a single variable to a receiver unit which
outputs a 4-20mA or 0-10V signal corresponding to
the input
2) To transmit multiple input values to a receiver unit
which provides either multiple 4-20mA or 0-10V
outputs or a single Ethernet or RS232 connection.
The transmitter and receiver units are identical units factory
configured for either function.
Outputs
DC Current and Voltage
0-20mA, 4-20mA, 0-10mA into 750Ω
0-1 V, 0-10 V, 1-5V into a minimum 2kΩ
Transmits up to 1024 I/O Values
through ZigBee Wireless Link
Simple Cable Replacement System
Local indication of Input Values
Expand the number of Inputs through
Iso-Slice I/O Modules
Receiver Output either analogue or
Ethernet/RS232 Connection with
Local Display
Inputs
The input types and ranges included below are our standard
ones only. Contact Sales for others.
DC Current & Voltage
0-20mA, 4-20mA, 0-10mA into 15/30 Ω
0-1V, 0-10V, 1-5V into 100kΩ / 1MΩ
0-25mV, 0-100mV, 0-500mV into >10MΩ
Min & Max Full Scale Ranges are:
DC Current 0 - 1mA 0 - 5A
Bipolar DC Current ±5mA ±10mA
DC Voltage 0 - 25mV 0 - 300V*
Bipolar DC Voltage ±5V ±10V
2 Wire Pot 0 - 125Ω 0 - 1kΩ
3 Wire Pot 0 - 1kΩ 0 - 100kΩ
* Note: For input voltages greater than 60Vdc a Divider unit
must be specified.
Thermocouples
Types E,J,K,N,R,S,T,B linearised or non-linearised
Ranges: Wide range of inputs
Cold junction compensation (can be turned off)
Upscale or downscale t/c burnout options
Resistance Thermometers
2, 3 or 4 wire PT100 or PT1000, linearised or non-linearised
Ranges: Wide range of inputs
Upscale or downscale RTD burnout options
Frequency Input
Wide range of freq inputs to 250kHz. Specify -FREQ
Additional I/O
Extra analogue and digital inputs and outputs are available
through the ISO-SLICE slice I/O modules.