Posts: 2,300
Threads: 878
Joined: Sep 2010
[attachment=7001]
FOUR-QUADRANT CHOPPER DRIVE FOR UNIVERSAL DC MOTOR
#G-5, Ratna Complex, Ameerpet,
#310, OPP. Kalaniketan, Dilshukh Nagar
AIM:
The main aim of the project is to develop a speed control system for DC motor using four-quadrant chopper. Using four-quadrant chopper it is possible to demonstrate forward &reverse motoring and braking.
PURPOSE:
The purpose of the project is to implement a simple and cost effective process to control the speed of DC motors using the most popular technique four-quadrant chopper method.
DESCRIPTION:
In this project armature is excited by a variable dc supply obtained from four-quadrant chopper. The system is provided with various control keys, such as START, STOP, REVERSE MOTORING, REVERSE BRAKE, FORWARD MOTORING, FORWARD BRAKE, INCREMENT and DECREMENT. Using these keys, the user can set the motor to run in any one of the following modes, namely Forward motoring, Reverse motoring, Forward braking and reverse braking. The speed can be varied by varying the voltage given to the PWM converter (using keypad).
Moreover, the system is provided with Soft start facility i.e., starting the motor without allowing the armature current to exceed the full load current. The Hardware of this system includes uncontrolled rectifier using diodes, chopper using IGBT’S, control keys, speed adjust potentiometer and other logical circuits.
Posts: 5,362
Threads: 2,998
Joined: Feb 2011
[attachment=10959]
FOUR-QUADRANT CHOPPER DRIVE FOR DC MOTOR
Objective:
The aim of the project is to develop a speed control system for DC motor using four-quadrant chopper. Using four-quadrant chopper it is possible to demonstrate forward &reverse motoring and braking.
Theory:
The speed of DC motor is directly proportional to armature voltage and inversely proportional to flux. By maintaining the flux constant, the speed can be varied by varying the armature voltage. The direction of rotation is reversed by reversing either field or armature voltage.
Functioning:
In this project, motor field is excited by the fixed dc voltage obtained from uncontrolled rectifier. The armature is excited by a variable dc supply obtained from four-quadrant chopper.
The system is provided with various control keys, such as START, STOP, FORWARD, REVERSE, FORWARD BRAKE, and REVERSE BRAKE. Using these keys, the user can set the motor to run in any one of the following modes, namely Forward motoring, Reverse motoring, Forward braking and Reverse braking. The speed can be varied by varying the voltage given to the PWM converter (using potentiometer).
Moreover, the system is provided with Soft start facility i.e., starting the motor without allowing the armature current to exceed the full load current.
Hardware:
The Hardware of this system includes uncontrolled rectifier using diodes, chopper using either MOSFETs or IGBTs, control keys, speed adjust potentiometer and other logical circuits.
Posts: 3
Threads: 0
Joined: Jul 2011
why v have used 314 volts in optocouplers igbt circuit
Posts: 6,566
Threads: 1,107
Joined: Jul 2011
To get more information about the topic "FOUR-QUADRANT CHOPPER DRIVE FOR UNIVERSAL DC MOTOR " please refer the page link below
http://studentbank.in/report-four-quadra...8#pid53938