flywheel based battery charger ppt
#1

Hi im Ahmad i study mechanical engineering. I'm interested in this topic . please if you can help me.
Reply
#2
Flywheel energy storage (FES) works by accelerating a rotor (flywheel) to a very high speed and maintaining the energy in the system as rotational energy. When energy is extracted from the system, the flywheel's rotational speed is reduced as a consequence of the principle of conservation of energy; adding energy to the system correspondingly results in an increase in the speed of the flywheel.

Most FES systems use electricity to accelerate and decelerate the flywheel, but devices that directly use mechanical energy are being developed. Since FES can be used to absorb or release electrical energy, such devices may sometimes be incorrectly[not in citation given] and confusingly described as either mechanical or inertia batteries.

Advanced FES systems have rotors made of high strength carbon-fiber composites, suspended by magnetic bearings, and spinning at speeds from 20,000 to over 50,000 rpm in a vacuum enclosure. Such flywheels can come up to speed in a matter of minutes – reaching their energy capacity much more quickly than some other forms of storage.
A typical system consists of a rotor suspended by bearings inside a vacuum chamber to reduce friction, connected to a combination electric motor and electric generator.

First generation flywheel energy storage systems use a large steel flywheel rotating on mechanical bearings. Newer systems use carbon-fiber composite rotors that have a higher tensile strength than steel and are an order of magnitude less heavy.[5]

Magnetic bearings are sometimes used instead of mechanical bearings, to reduce friction.

Other components are hub and shaft.
The expense of refrigeration led to the early dismissal of low-temperature superconductors for use in magnetic bearings. However, high-temperature superconductor (HTSC) bearings may be economical and could possibly extend the time energy could be stored economically. Hybrid bearing systems are most likely to see use first. High-temperature superconductor bearings have historically had problems providing the lifting forces necessary for the larger designs, but can easily provide a stabilizing force. Therefore, in hybrid bearings, permanent magnets support the load and high-temperature superconductors are used to stabilize it. The reason superconductors can work well stabilizing the load is because they are perfect diamagnets. If the rotor tries to drift off center, a restoring force due to flux pinning restores it. This is known as the magnetic stiffness of the bearing. Rotational axis vibration can occur due to low stiffness and damping, which are inherent problems of superconducting magnets, preventing the use of completely superconducting magnetic bearings for flywheel applications.

Since flux pinning is an important factor for providing the stabilizing and lifting force, the HTSC can be made much more easily for FES than for other uses. HTSC powders can be formed into arbitrary shapes so long as flux pinning is strong. An ongoing challenge that has to be overcome before superconductors can provide the full lifting force for an FES system is finding a way to suppress the decrease of levitation force and the gradual fall of rotor during operation caused by the flux creep of the superconducting material.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: design of flywheel ppt, battery charger ppt, ppt theory of machine flywheel, ppt for flywheel battery, download free ppt about flywheel, ppt on speed control flywheel, function and application of flywheel ppt,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  project report on battery level indicator pdf 0 1,890 25-09-2018, 05:50 PM
Last Post: Guest
  mobile charger project report pdf 1 906 20-09-2018, 03:31 PM
Last Post: Guest
  amara raja battery internships 1 493 19-09-2018, 12:04 PM
Last Post: Guest
  behavior based safety in hindi ppt presentation 0 738 15-07-2018, 11:07 AM
Last Post: Guest
  download the azure service bus cloud based messeging seminar pdf and ppt 0 831 07-06-2018, 08:21 PM
Last Post: Guest
  microprocessor based lift overload preventer project ppt 0 529 14-05-2018, 05:21 PM
Last Post: Guest
  fabrication of flywheel based battery charger full detailed pdf 0 597 10-05-2018, 05:37 PM
Last Post: Guest
  seminar report on wireless solar mobile charger pdf 0 785 07-04-2018, 01:36 PM
Last Post: Guest
  seminar report on wireless solar mobile charger pdf 0 586 07-04-2018, 01:35 PM
Last Post: Guest
  gps based border alert system for fishermen ppt 0 464 06-04-2018, 02:17 PM
Last Post: Guest

Forum Jump: