It is needed for my project

LSP designed the PowerPump so that coolant can be delivered to PowerMist nozzles under pressure without the the need to go into pressurized vessels. Up to 25 PowerMist units can be supplied with coolant from a centralized PowerPump. PowerMist nozzels can be dispersed throughout the plant, or multiple nozzels can be located on one machine.The OptiMist Package is unique in its ability to combine high performance with economy and efficiency. The reservoirs, for example, are constructed of strong chemical-resistant long chain polyethylene. The nozzle assembly is of a proven design. Combining our dependable mist coolant nozzle with the corresponding reservoir we deliver a total system that is economically priced and convenient to use. Whether you make the OptiMist a permanent part of the machining tool or use it as a portable system, its service and durability make it a wise investment for any manufacturing plant.The BasicMist uses the Venturi principle for operation. When air (shown in gray) is introduced to a typical unit, like the M-122 MagnaMist at the right, and the “Air Valve” is open, it passes completely through and is released at the “Nozzle Tip”. The air stream forms a “Venturi”, creating suction that draws coolant (shown in blue) from a coolant reservoir to the “Coolant Port” where it joins the air to form a mist spray. The force of the spray is easily regulated by adjusting the “Air Valve” to control both air volume and velocity. To adjust the coolant volume one has only to turn the “Nozzle Housing.”