fabrication and maintenance of batteries seminars topic ppt
#1

Iam in the need of seminar. Provided in above links Fabrication & maintenance of batteries. I request u to provide me PDF + Ppt of seminar topic & documents
Reply
#2
Iam in need of details report of seminar topic fabrication & maintenance of batteries .I want PDF ppt
Reply
#3
fabrication and maintenance of batteries seminar topic ppt

The lithium-polymer differentiates itself from conventional battery systems in the type of electrolyte used. The original design, dating back to the 1970s, uses a dry solid polymer electrolyte. This electrolyte resembles a plastic-like film that does not conduct electricity but allows ions exchange (electrically charged atoms or groups of atoms). The polymer electrolyte replaces the traditional porous separator, which is soaked with electrolyte. The dry polymer design offers simplifications with respect to fabrication, ruggedness, safety and thin-profile geometry. With a cell thickness measuring as little as one millimeter (0.039 inches), equipment designers are left to their own imagination in terms of form, shape and size. Unfortunately, the dry lithium-polymer suffers from poor conductivity. The internal resistance is too high and cannot deliver the current bursts needed to power modern communication devices and spin up the hard drives of mobile computing equipment. Heating the cell to 60°C (140°F) and higher increases the conductivity, a requirement that is unsuitable for portable applications. To compromise, some gelled electrolyte has been added. The commercial cells use a separator/ electrolyte membrane prepared from the same traditional porous polyethylene or polypropylene separator filled with a polymer, which gels upon filling with the liquid electrolyte. Thus the commercial lithium-ion polymer cells are very similar in chemistry and materials to their liquid electrolyte counter parts. Lithium-ion-polymer has not caught on as quickly as some analysts had expected. Its superiority to other systems and low manufacturing costs has not been realized. No improvements in capacity gains are achieved - in fact, the capacity is slightly less than that of the standard lithium-ion battery. Lithium-ion-polymer finds its market niche in wafer-thin geometries, such as batteries for credit cards and other such applications.
Reply
#4
PDF + ppt of especially & detail report of fabrication & maintenances of batteries provide me .
Reply
#5

Battery Care & Maintenance

Taking good care of your battery will help to extend its service life. For tips on how to keep your battery in top condition, please follow the links below.

Regular Inspection and Maintenance

Battery Testing

Battery Charging

Factors Affecting Battery Life

Technical Tips

Why do Batteries Fail?


Regular Inspection and Maintenance
Regular testing and inspection will help to maximise battery life. A routine inspection at least once a month is recommended to maintain optimum performance.

Use the following as a guide when examining your battery:

1. Ensure the battery top is clean and dry, free of dirt and grime. A dirty battery can discharge across the grime on top of the battery casing.

2. Inspect the terminals, screws, clamps and cables for breakage, damage or loose connections. These should be clean, tight and free of corrosion.

3. Apply a thin coating of high temperature grease to posts and cable connections for added protection.

4. Inspect the battery case for obvious signs of physical damage or warpage. This usually indicates the battery has overheated or has been overcharged.

5. Check electrolyte levels to ensure that fluid levels are over the top of battery plates. If necessary top up using distilled or demineralised water. Never top up fluid levels with acid.

6. Test the battery using either a hydrometer or voltmeter and charge if necessary.

If you are unsure about the condition or state of charge of the battery, take it to your local Century battery reseller. They can inspect and test your battery and provide you with professional advice and assistance.

Battery Testing
Battery testing should form part of a regular maintenance routine. Pre-emptive battery replacement can help eliminate many of the costs and problems associated with a flat battery.
Voltage and Specific Gravity

Voltage (V) and Specific Gravity (SG) are measurements used to determine a battery’s state of charge. Voltage is a quick and easy way of measuring charge levels and is measured by connecting either a multi-meter or voltmeter and obtaining a DC reading. Always connect the multi-meter parallel to the circuit being tested, observing polarity; otherwise the result will be negative.

Hydrometers measure the Specific Gravity of the electrolyte and indicate the density of electrolyte compared to water. As this requires access to acid reservoirs, it is only suitable for use with maintainable batteries.
Testing Methods

Unloaded Testing

This is performed using either device, when there is no current draw on the battery. A specific gravity reading of 1.275 to 1.290 shows a full charge whereas a reading below 1.240 indicates that the battery should be recharged. If the stabilised open circuit voltage is below 12.55V, this also indicates recharging is required.
Low Load Testing

This is conducted using a multi-meter or volt meter whilst running an accessory, such as the headlights, and taking a voltage reading. The battery in a 12V system should have at least 11.5V DC with the lights on. If the voltage drops below this level, the battery needs charging.

Battery Charging
Always read the manufacturer’s instructions before attempting to charge a battery and ensure you have a good quality Australian-approved battery charger. The battery type and its internal components will determine which type of charger is required.

Important Note:
Avoid quick charging as this only charges the surface of the battery plates and can increase the chance of overheating, leading to permanent battery damage.

Be aware of all safety precautions that should be observed during the charging operation before attempting to charge a battery.

1. Turn the charger off before attaching, rocking or removing the terminal clamps.

2. Keep open flames and sparks away from the battery.

3. Keep vent caps in place.

4. Charge in well ventilated area.

5. Follow the battery charger manufacturer’s instructions to avoid overheating.

Specific charging rates or times are difficult to detail due to a number of other features, such as:

1. The electrical capacity of the battery.

2. Temperature of the electrolyte.

3. Battery state of charge at the start of the charging period.

4. Battery age and condition.

Factors Affecting Battery Life
As batteries age they gradually lose their capacity as their function is performed. The constant charge and discharge eventually leads to failure. Components corrode over time, electrical shorts occur and vibration causes damage; all eventually causing failure. Overcharging and undercharging of a battery will also have a bearing on battery life.
Battery Inspection

Check electrolyte level - fluid below the tops of the separators indicates overcharging or poor maintenance. Overcharge condition may be due to incorrect voltage setting, low voltage caused by heat or internal defects, or old age deterioration.

Is there electrolyte on the top of the battery? This can indicate overcharging or overfilling.

Is the battery loose in the carrier? This can cause failure from vibration.

Does the battery have signs of damage or mistreatment? This can also cause failure.
Discharged (flat) Batteries

A flat battery should be checked with a hydrometer. A low Specific Gravity reading of 1.220 or less in all cells indicates a discharged battery and it must be charged before further examination and testing can occur. The discharged condition may be due to a problem in the electrical system (slipping alternator belt, faulty regulator or alternator, high resistance due to corrosion). Internal shorts may also be due to manufacturing defects or shorts through the ageing process or vibration damage.
Early Warning Signs

Batteries often fail when least expected. The usual warning is a slower than normal battery ability to crank the engine. Other less noticeable factors, such as changed driving patterns and colder/hotter weather will all have an effect on the life of a battery. Encourage your customers to ask for a ‘FREE Battery Test’. It’s good public relations and if the battery is near failure, it may avoid the inconvenience of a roadside breakdown.

Technical Tips
Vibration can reduce a battery’s life. Always use an approved battery clamp to limit vibration. Century batteries are built tough, using robust internal components to resist damage through abrasion and puncture from vehicle vibration.

Many alleged ‘dead batteries’ are merely flat batteries. Drivers simply leave lights on or can have faulty voltage regulators.
Ensure your battery is properly tested before replacing a battery.

It’s impossible to know exactly when a battery might fail. A slow starting engine is sometimes an indication.
Old batteries can give trouble in colder weather.
Equally, if an engine area becomes overheated in very hot weather and the battery is under strain from air conditioners it may fail. Regular battery checks are always advised.

Why do Batteries Fail?

Batteries have a finite life, determined by the application and the operating conditions. Battery failure can be attributed to various factors, however the causes of failure fall under two distinct categories: manufacturing and non-manufacturing faults.
Manufacturing Faults

Typically occur within the first 3 months.
Short Circuits/Dead Cells

Where one cell will show a dramatically lower Specific Gravity (SG) reading than the other cells.
Internal Break

Usually resulting from physical damage to a battery during transportation.

Century’s stringent quality assurance and inspection processes demanded by leading vehicle manufacturers ensure genuine manufacturing faults in Century Batteries are negligible.
Non Manufacturing Faults

These fall outside of Century’s strict quality control systems and are more likely to occur the longer the battery is in service. They are often attributed to a problem with the vehicle’s electrical system, its operation or the battery application.
Wear and Tear

As a battery ages, grid metal corrodes and active material is lost from the plate. Over time this leads to a point where the battery will no longer be able to start a vehicle. High temperature will accelerate the degradation rates.
Physical Damage

Incorrect fitment, handling and storage often leads to external damage and subsequent battery failure.
Incorrect Application

Fitting a smaller, less powerful battery or a battery designed for another application can lead to early failure.
Negligence

Failure to maintain fluid levels exposes internal components and accelerates battery failure.
Sulphation

Occurs when the battery is allowed to stand in a discharged state for an extended period of time.
Over-Charging

Often caused if the alternator is incorrectly set or the alternator voltage control fails.
Under-Charging

Short journeys, stop start driving or faulty alternators will not fully recharge a battery.
Discharge

Lights or other accessories left on for extended periods.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: fabrication maintenance of batteries ppt report, seminartopic maintanance,
Popular Searches: machines maintenance seminars, seminartopic aeronatical, seminar ppt on fabrication, ppt on micro batteries for seminar, operation maintenance of substation seminar topic, robosand seminartopic, electrical seminar ppt micro batteries,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  ambient security expert systems seminars ppt 2 10,986 25-08-2018, 09:19 PM
Last Post: Zik
  sample impression after seminars elln deped 4 8,359 08-02-2018, 03:55 PM
Last Post: Guest
Smile download wi vi technology seminars report pdf 2 15,691 24-01-2018, 11:27 PM
Last Post: sultan@123
  fabrication of spring rolling machine pdf 2 1,707 15-01-2018, 07:34 AM
Last Post: AustinnuAke
  interesting seminars topics in entomology 3 8,534 28-09-2017, 11:51 AM
Last Post: jaseela123d
  FABRICATION OF A WIND POWERED VEHICLE help with a project hunain zafar 4 2,165 02-08-2017, 12:20 PM
Last Post: jaseela123d
Thumbs Up online catering management system on php with report and source code and ppt 4 8,715 29-04-2017, 10:59 AM
Last Post: jaseela123d
  solar powered aircraft seminars report pdf 2 7,806 11-10-2016, 09:36 AM
Last Post: sachinkoli
  pdf seminars report fog computing 1 7,647 09-10-2016, 06:52 PM
Last Post: hiiire
  sample impression message after a seminars for teachers 1 14,684 23-08-2016, 11:17 AM
Last Post: ijasti

Forum Jump: