ETHICAL HACKING A SEMINAR REPORT
#1

A SEMINAR REPORT ON
ETHICAL HACKING

Submitted by: SANDEEP NAIR NARAYANAN
COMPUTER SCIENCE & ENGINEERING
SCHOOL OF ENGINEERING
COCHIN UNIVERSITY OF SCIENCE & TECHNOLOGY,
KOCHI-682022
AUGUST
ABSTRACT
Today more and more softwares are developing and people are getting more and more options in their present softwares. But many are not aware that they are being hacked without their knowledge. One reaction to this state of affairs is a behavior termed Ethical Hacking" which attempts to proactively increase security protection by identifying and patching known security vulnerabilities on systems owned by other parties. A good ethical hacker should know the methodology chosen by the hacker like reconnaissance, host or target scanning, gaining access, maintaining access and clearing tracks. For ethical hacking we should know about the various tools and methods that can be used by a black hat hacker apart from the methodology used by him. From the point of view of the user one should know atleast some of these because some hackers make use of those who are not aware of the various hacking methods to hack into a system. Also when thinking from the point of view of the developer, he also should be aware of these since he should be able to close holes in his software even with the usage of the various tools. With the advent of new tools the hackers may make new tactics. But atleast the software will be resistant to some of the tools
1.INTRODUCTION
Ethical hacking ,also known as penetration testing or white-hat hacking, involves the same tools, tricks, and techniques that hackers use, but with one major difference that Ethical hacking is legal. Ethical hacking is performed with the targetâ„¢s permission. The intent of ethical hacking is to discover vulnerabilities from a hackerâ„¢s viewpoint so systems can be better secured. Itâ„¢s part of an overall information risk management program that allows for ongoing security improvements. Ethical hacking can also ensure that vendorsâ„¢claims about the security of their products are legitimate.
1.1 Security
Security is the condition of being protected against danger or loss. In the general sense, security is a concept similar to safety. In the case of networks the security is also called the information security. Information security means protecting information and information systems from unauthorized access, use, disclosure, disruption, modification, or destruction. Usually the security is described in terms of CIA triads. The CIA are the basic principles of security in which C denotes the Confidentiality , I represents Integrity and the letter A represents the Availability. Confidentiality
Confidentiality is the property of preventing disclosure of information to unauthorized individuals or systems. This implies that the particular data should be seen only by the authorized personals. Those persons who is a passive person should not see those data. For example in the case of a credit card transaction, the authorized person should see the credit card numbers and he should see that data. Nobody others should see that number because they may use it for some other activities. Thus the confidentiality is very important. Confidentiality is necessary for maintaining the privacy of the people whose personal information a system holds.

Integrity
Integrity means that data cannot be modified without authorization. This means that the data seen by the authorized persons should be correct or the data should maintain the property of integrity. With out that integrity the data is of no use. Integrity is violated when a computer virus infects a computer, when an employee is able to modify his own salary in a payroll database, when an unauthorized user vandalizes a web site, when someone is able to cast a very large number of votes in an online poll, and so on. In such cases the data is modified and then we can say that there is a breach in the security.
Availability
For any information system to serve its purpose, the information must be available when it is needed. Consider the case in which the data should have integrity and confidentiality. For achieving both these goals easily we can make those data off line. But then the data is not available for the user or it is not available. Hence the data is of no use even if it have all the other characteristics. This means that the computing systems used to store and process the information, the security controls used to protect it, and the communication channels used to access it must be functioning correctly.
All these factors are considered to be important since data lacking any of the above characteristics is useless. Therefore security is described as the CIA trio. Lacking any one of the CIA means there is a security breach.
1.2 Need for Security
Computer security is required because most organizations can be damaged by hostile software or intruders. Moreover security is directly related to business. This is because if a company losses a series of credit card numbers of it`s customers then many customers would be hesitant to go back to the same company and that particular company will lose many customer and hence the business. There may be several forms of damage which are obviously interrelated which are produced by the intruders. These include:
lose of confidential data damage or destruction of data damage or destruction of computer system loss of reputation of a company There may be many more in the list due to security breaches. This means that security is absolutely necessary.
1.3 Hacking
A hacker is a person who is interested in a particular subject and have an immense knowledge on that subject. In the world of computers a hacker is a person intensely interested in the arcane and recondite workings of any computer operating system. Most often, hackers are programmers with advance knowledge of operating systems and programming languages. Eric Raymond, compiler of The New Hacker's Dictionary, defines a hacker as a clever programmer. A "good hack" is a clever solution to a programming problem and "hacking" is the act of doing it. Raymond lists five possible characteristics that qualify one as a hacker, which we paraphrase here:
A person who enjoys learning details of a programming language or system
A person who enjoys actually doing the programming rather than just theorizing about it
A person capable of appreciating someone else's hacking
A person who picks up programming quickly
A person who is an expert at a particular programming language or system
1.4 Types of Hackers
Hackers can be broadly classified on the basis of why they are hacking system or why the are indulging hacking. There are mainly three types of hacker on this basis Black-Hat Hacker A black hat hackers are individuals with extraordinary computing skills, resorting to malicious or destructive activities. That is black hat hackers use their knowledge and skill for their own personal gains probably by hurting others. These black hat hackers are also known as crackers White-Hat Hacker White hat hackers are those individuals professing hacker skills and using them for defensive purposes. This means that the white hat hackers use their knowledge and skill for the good of others and for the common good. These white hat hackers are also called as security analysts.
Grey-Hat Hackers
These are individuals who work both offensively and defensively at various times. We cannot predict their behaviour. Sometimes they use their skills for the common good while in some other times he uses them for their personal gains.
1.5 Can Hacking Be Done Ethically Due to some reasons hacking is always meant in the bad sense and hacking means black hat hacking. But the question is can hacking be done ethically? The answer is yes because to catch a thief, think like a thief. Thatâ„¢s the basis for ethical hacking. Suppose a person or hacker try to hack in to a system and if he finds a vulnerability. Also suppose that he reports to the company that there is a vulnerability. Then the company could make patches for that vulnerability and hence they could protect themselves from some future attacks from some black hat hacker who tries to use the same vulnerability. So unless some body try to find a vulnerability, it remains hidden and on someday somebody might find these vulnerability and exploit them for their own personal interests. So this can be done using ethical hacking.
1.6 Ethical hacking is also known as penetration testing, intrusion testing or red teaming. With the growth of the Internet, computer security has become a major concern for businesses and governments. They want to be able to take advantage of the Internet for electronic commerce, advertising, information distribution and access, and other pursuits, but they are worried about the possibility of being hacked. At the same time, the potential customers of these services are worried about maintaining control of personal information that varies from credit card numbers to social security numbers and home addresses. In their search for a way to approach the problem, organizations came to realize that one of the best ways to evaluate the intruder threat to their interests would be to have independent computer security professionals attempt to break into their computer systems. This scheme is called Ethical Hacking. This similar to having independent auditors come into an organization to verify its bookkeeping records. This method of evaluating the security of a system has been in use from the early days of computers. In one early ethical hack, the United States Air Force conducted a security evaluation of the Multics operating systems for potential use as a two-level (secret/top secret) system. With that they found out that the particular software is better than the conventional systems. But it also brought out some of its vulnerabilities.

Successful ethical hackers possess a variety of skills. First and foremost, they must be completely trustworthy. While testing the security of a client's systems, the ethical hacker may discover information about the client that should remain secret. In many cases, this information, if publicized, could lead to real intruders breaking into the systems, possibly leading to financial losses. During an evaluation, the ethical hacker often holds the keys to the company, and therefore must be trusted to exercise tight control over any information about a target that could be misused. The sensitivity of the information gathered during an evaluation requires that strong measures be taken to ensure the security of the systems being employed by the ethical hackers themselves: limited-access labs with physical security protection and full ceiling-to-floor walls, multiple secure Internet connections, a safe to hold paper documentation from clients, strong cryptography to protect electronic results, and isolated networks for testing. Ethical hackers also should possess very strong programming and computer networking skills and have been in the computer and networking business for several years. Another quality needed for ethical hacker is to have more drive and patience than most people since a typical evaluation may require several days of tedious work that is difficult to automate. Some portions of the evaluations must be done outside of normal working hours to avoid interfering with production at live targets or to simulate the timing of a real attack. When they encounter a system with which they are unfamiliar, ethical hackers will spend the time to learn about the system and try to find its weaknesses. Finally, keeping up with the ever-changing world of computer and network security requires continuous education and review.
1.7 What do an Ethical Hacker do An ethical hacker is a person doing ethical hacking that is he is a security personal who tries to penetrate in to a network to find if there is some vulnerability in the system. An ethical hacker will always have the permission to enter into the target network. An ethical hacker will first think with a mindset of a hacker who tries to get in to the system. He will first find out what an intruder can see or what others can see. Finding these an ethical hacker will try to get into the system with those information in whatever method he can. If he succeeds in penetrating into the system then he will report to the company with a detailed report about the particular vulnerability exploiting which he got in to the system. He may also sometimes make patches for that particular vulnerability or he may suggest some methods to prevent the vulnerability.

2. Ethical hacking is a process in which an authenticated person,who is a computer and network expert, attacks a security system on behalf of it`s owners a security system on behalf of its owners, seeking vulnerabilities that a malicious hacker could exploit. In order to test the system an ethical hacker will use the same principles as the usual hacker uses, but reports those vulnerabilities instead of using them for their own advantage.
2.1 Analogy with Building Robbing
The methodology of a hacker is similar to the one used for usual thefts. Lets consider the case of a bank robbery. The first step will be to find information about the total transaction of the bank, the total amount of money that may be kept in the bank, who is the manager, if the security personals have a gun with them etc. This is similar to the reconnaissance phase of hacking. The next step will be to find the ways through which we can enter the building, how many doors are present in the building, if there is a lock at each door etc. This is similar to the second stage the scanning in which we will check which all hosts are present, which all services are running etc. The third step will be to enter the building which is similar to gaining access. For entering in to a building we need some keys. Like that in case of network we need some ids and passwords. Once we entered the building our next aim will be to make an easier way inside when I come next time which is analogous to the next step maintaining access. In the hacking case we use Trojans,back door worms etc like placing a hidden door inside the building. Then the final step in which we will try to hide the fact that I entered the building which is analogous to the clearing of tracks in the case of hacking
2.2 Methodology of Hacking
As described above there are mainly five steps in hacking like reconnaissance, scanning, gaining access, maintaining access and clearing tracks. But it is not the end of the process. The actual hacking will be a circular one. Once the hacker completed the five steps then the hacker will start reconnaissance in that stage and the preceding stages to get in to the next level. The various stages in the hacking methodology are
Reconnaissance
Scanning & Enumeration
Gaining access
Maintaining access
Clearing tracks
2.3 Reconnaissance
The literal meaning of the word reconnaissance means a preliminary survey to gain information. This is also known as foot-printing. This is the first stage in the methodology of hacking. As given in the analogy, this is the stage in which the hacker collects information about the company which the personal is going to hack. This is one of the pre-attacking phases. Reconnaissance refers to the preparatory phase where an attacker learns about all of the possible attack vectors that can be used in their plan. In this pre-attack phase we will gather as much as information as possible which are publicly available. The information includes the domain names, locations contact informations etc. The basic objective of this phase is to make a methodological mapping of the targets security schema which results in a unique organization profile with respect to network and system involved. As we are dealing with the Internet we can find many information here which we may not intend to put it publicly. We have many tools for such purposes. These include tools like samspade, email tracker, visual route etc. The interesting thing to note is that we can even use the simple googling as a footprinting tool.
2.3.1 Google
Google is one of the most famous search engines used in the Internet. Using some kind of specialized keywords for searching we can find many such information that is put in publicly. For example if we use some keywords like for internal use only followed by the targets domain name we may get many such useful information. Some times even if the company actually removed from its site, it sometimes get preserved in the Google`s caches. Some times even the job advertisement in Internet can also be used in footprinting. For example if some company is looking for professional who are good in oracle database, this can be telling to the world that they are using th oracle database in their company. This can be helpful for the hacker since he can look for the vulnerabilities of that particular object. One of the main advantages of Google is it`s advanced search option. The advanced search have many options like searching for particular domain, documents published after a particular period of time, files of particular format, particular languages etc.
2.3.2 Samspade
Samspade is a simple tool which provides us information about a particular host. This tool is very much helpful in finding the addresses, phone numbers etc The above fig 2.1 represents the GUI of the samspade tool. In the text field in the top left corner of the window we just need to put the address of the particular host. Then we can find out various information available. The information given may be phone numbers, contact names, IP addresses , email ids, address range etc. We may think that what is the benefit of getting the phone numbers, email ids, addresses etc. But one of the best way to get information about a company is to just pick up the phone and ask the details. Thus we can much information in just one click.
2.3.3 Email Tracker and Visual Route
We often used to receive many spam messages in our mail box. We don`t know where it comes from. Email tracker is a software which helps us to find from which server does the mail actually came from. Evey message we receive will have a header associated with it. The email tracker use this header information for find the location.
The above fig 2.2 shows the GUI of the email tracker software. One of the options in the email tracker is to import the mail header. In this software we just need to import the mails header to it. Then the software finds from which area does that mail come from. That is we will get information like from which region does the message come from like Asia pacific, Europe etc. To be more specific we can use another tool visual route to pinpoint the actual location of the server. The option of connecting to visual route is available in the email tracker. Visual route is a tool which displays the location a particular server with the help of IP addresses. When we connect this with the email tracker we can find the server which actually send the mail . We can use this for finding the location of servers of targets also visually in a map.
The above fig 2.3 depicts the GUI of the visual route tool. The visual route GUI have a world map drawn to it. The software will locate the position of the server in that world map. It will also depict the path though which the message came to our system. This software will actually provide us with information about the routers through which the message or the path traced by the mail from the source to the destination. We may wonder what is the use of finding the place from which the message came. Suppose you got the email id of an employee of our target company and we mailed to him telling that u are his greatest friend. Some times he may reply you saying that he don`t know you. Then you use the email tracker and the visual route to find that he is not working from the office. Then you can understand that there are home users in the company. We should understand the fact that the home users are not protected like the employees working from office. This can be helpful for the hacker to get in to the system.
2.4 Scanning & Enumeration
Scanning is the second phase in the hacking methodology in which the hacker tries to make a blue print of the target network. It is similar to a thief going through your neighborhood and checking every door and window on each house to see which ones are open and which ones are locked. The blue print includes the ip addresses of the target network which are live, the services which are running on those system and so on. Usually the services run on predetermined ports. For example the web server will be making use of the port no 80. This implies that if the port 80 is open in a particular system we can understand that the targets web server is running in that host. There are different tools used for scanning war dialing and pingers were used earlier but now a days both could be detected easily and hence are not in much use. Modern port scanning uses TCP protocol to do scanning and they could even detect the operating systems running on the particular hosts.
2.4.1 War Dialing
The war dialers is a hacking tool which is now illegal and easier to find out. War dialing is the practice of dialing all the phone numbers in a range in order to find those that will answer with a modem. Earlier the companies used to use dial in modems to which their employees can dial in to the network. Just a phone number is enough in such cases. War dialing software makes use of this vulnerability. A war dialer is a computer program used to identify the phone numbers that can successfully make a connection with a computer modem. The program automatically dials a defined range of phone numbers and logs and enters in a database those numbers that successfully connect to the modem. Some programs can also identify the particular operating system running in the computer and may also conduct automated penetration testing. In such cases, the war dialer runs through a predetermined list of common user names and passwords in an attempt to gain access to the system.
2.4.2 Pingers
Pingers and yet another category of scanning tools which makes use of the Internet Control Message Protocol(ICMP) packets for scanning. The ICMP is actually used to know if a particular system is alive or not. Pingers using this principle send ICMP packets to all host in a given range if the acknowledgment comes back we can make out that the system is live. Pingers are automated software which sends the ICMP packets to different machines and checking their responses. But most of the firewalls today blocks ICMP and hence they also cannot be used.
2.4.3 Port Scanning
A port scan is a method used by hackers to determine what ports are open or in use on a system or network. By using various tools a hacker can send data to TCP or UDP ports one at a time. Based on the response received the port scan utility can determine if that port is in use. Using this information the hacker can then focus their attack on the ports that are open and try to exploit any weaknesses to gain access. Port scanning software, in its most basic state, simply sends out a request to connect to the target computer on each port sequentially and makes a note of which ports responded or seem open to more in-depth probing. Network security applications can be configured to alert administrators if they detect connection requests across a broad range of ports from a single host. To get around this the intruder can do the port scan in strobe or stealth mode. Strobing limits the ports to a smaller target set rather than blanket scanning all 65536 ports. Stealth scanning uses techniques such as slowing the scan. By scanning the ports over a much longer period of time you reduce the chance that the target will trigger an alert.
2.4.4 Super Scan
SuperScan is a powerful TCP port scanner, that includes a variety of additional networking tools like ping, traceroute, HTTP HEAD, WHOIS and more. It uses multi- threaded and asynchronous techniques resulting in extremely fast and versatile scanning. You can perform ping scans and port scans using any IP range or specify a text file to extract addresses from. Other features include TCP SYN scanning, UDP scanning, HTML reports, built-in port description database, Windows host enumeration, banner grabbing and more.
The fig 2.4 show the GUI of the superscan. In this either we can search a particular host or over a range of IP addresses. As an output the software will report the host addresses which are running. There is another option port list setup which will display the set of services which are running on different hosts.
2.4.5 Nmap
Nmap ("Network Mapper") is a free and open source utility for network exploration or security auditing. Many systems and network administrators also find it useful for tasks such as network inventory, managing service upgrade schedules, and monitoring host or service uptime. The fig 2.5 shows the GUI of the Nmap. Nmap uses raw IP packets in novel ways to determine what hosts are available on the network, what services those hosts are offering, what operating systems they are running, what type of packet filters or firewalls are in use, and dozens of other characteristics. It can even find the different versions. It was designed to rapidly scan large networks, but works fine against single hosts. We also have the option of different types of scan like syn scan, stealth scan, syn stealth scan etc and using this we can even time the scanning of different ports. Using this software we just need to specify the different host address ranges and the type of scan to be conducted. As an output we get the hosts which are live, the services which are running etc. It can even detect the version of the operating system making use of the fact that different operating systems react differently to the same packets as they use their own protocol stacks.
2.4.6 Enumeration
Enumeration is the ability of a hacker to convince some servers to give them information that is vital to them to make an attack. By doing this the hacker aims to find what resources and shares can be found in the system, what valid user account and user groups are there in the network, what applications will be there etc. Hackers may use this also to find another hosts in the entire network. A common type of enumeration is by making use of the null sessions. Many of the windows operating systems will allow null sessions through which a hacker can log on. A null session is a connection which uses no user name and password. That is a null session is created by keeping the user name and password as null. Once the hacker is logged in then he start enumeration by issuing some queries to find the list of users and groups either local or active including SID`s, list of hosts, list of shares or processes etc. One of the tools used after logging in using null sessions is NBTscan which allows the hacker to scan the network this helps the hacker to get the user name, resource shares etc. Other tools used are NAT(Netbios Auditing Tool), DumpSec etc. Another way of enumerating is the enumeration of the SNMP(Simple Network Management Protocol). Using this protocol the managing entities send messages to the managed entities. In enumerating this SNMP protocol the hacker sniffs the network to get the various information. The SNMP versions till 3 sends data as text files so it is very easy to get data. While from SNMP version 3 there the data is encrypted and send. But still we can enumerate those protocols and get information. Some of the tools used for this are SNMPutil, IP Network Browser etc.
2.5 System Hacking
This is the actual hacking phase in which the hacker gains access to the system. The hacker will make use of all the information he collected in the pre- attacking phases. Usually the main hindrance to gaining access to a system is the passwords. System hacking can be considered as many steps. First the hacker will try to get in to the system. Once he get in to the system the next thing he want will be to increase his privileges so that he can have more control over the system. As a normal user the hacker may not be able to see the confidential details or cannot upload or run the different hack tools for his own personal interest. Another way to crack in to a system is by the attacks like man in the middle attack.
2.5.1 Password Cracking
There are many methods for cracking the password and then get in to the system. The simplest method is to guess the password. But this is a tedious work. But in order to make this work easier there are many automated tools for password guessing like legion. Legion actually have an inbuilt dictionary in it and the software will automatically. That is the software it self generates the password using the dictionary and will check the responses. Many types of password cracking strategies are used today by the hackers which are described below.
Dictionary cracking
In this type of cracking there will be a list of various words like the persons children`s name, birthday etc. The automated software will then make use of these words to make different combinations of these words and they will automatically try it to the system.
Brute force cracking
This is another type of password cracking which does not have a list of pre compiled words. In this method the software will automatically choose all the combinations of different letters, special characters, symbols etc and try them automatically. This process is of course very tedious and time consuming.
Hybrid cracking
This is a combination of both dictionary and hybrid cracking technique. This means that it will first check the combination of words in it inbuilt dictionary and if all of them fails it will try brute force.
Social Engineering
The best and the most common method used to crack the password is social engineering. In this technique the hacker will come in direct contact with the user through a phone call or some way and directly ask for the password by doing some fraud.

2.5.2 Loftcrack
This is a software from @stake which is basically a password audit tool. This software uses the various password cracking methodologies. Loftcrack helps the administrators to find if their users are using an easy password or not. This is very high profile software which uses dictionary cracking then brute force cracking. Some times it uses the precompiled hashes called rainbow tables for cracking the passwords.
The fig 2.6 given above shows the GUI of loftcrack. Usually in windows the passwords are stored in the sam file in the config directory of system 32. This file operating system protected that is we cannot access this file if the operating system is running. But with this loftcrack we just need to run a wizard to get the details of the passwords stored in the sam file. As seen from the figure the software used the dictionary of 29156 words in this case. It also got options to use the brute force and pre-compiled hashes.
2.5.3 Privilege escalation
Privilege escalation is the process of raising the privileges once the hacker get in to the system. That is the hacker may get in as an ordinary user. And now he tries to increase his privileges to that of an administrator who can do many things. There are many types of tools available for this. There are some tools like getadmin attaches the user to some kernel routine so that the services run by the user look like a system routine rather than user initiated program. The privilege escalation process usually uses the vulnerabilities present in the host operating system or the software. There are many tools like hk.exe, metasploit etc. One such community of hackers is the metasploit.
2.5.4 Metasploit
Metasploit is actually a community which provides an online list of vulnerabilities. The hacker can directly download the vulnerabilities and directly use in the target system for privilege escalation and other exploits. Metasploit is a command line tool and is very dangerous as the whole community of black hat hackers are contributing their own findings of different vulnerabilities of different products.
2.5.5 Man in the Middle Attack
In this type of system hacking we are not actually cracking the password instead we let all the traffic between a host and a client to go through the hacker system so that he can directly find out the passwords and other details. In the man in the middle attack what a hacker does is he will tell to the user that he is the server and then tell the server that I am the client. Now the client will send packets to the hacker thinking that he is the server and then the hacker instead of replying forwards a copy of the actual request to the actual server. The server will then reply to the hacker which will forward a copy of the reply to the actual client. Now the client will think that he got the reply from the server and the server will think that it replied to the actual client. But actually the hacker,the man in the middle, also have a copy of the whole traffic from which he can directly get the needed data or the password using which he can actually hack in.
2.6 Maintaining Access
Now the hacker is inside the system by some means by password guessing or exploiting some of it`s vulnerabilities. This means that he is now in a position to upload some files and download some of them. The next aim will be to make an easier path to get in when he comes the next time. This is analogous to making a small hidden door in the building so that he can directly enter in to the building through the door easily. In the network scenario the hacker will do it by uploading some softwares like Trojan horses,sniffers, key stroke loggers etc.
2.6.1 Key Stroke Loggers
Key stroke loggers are actually tools which record every movement of the keys in the keyboard. There are software and hardware keystroke loggers the directly records the movement of keys directly. For maintaining access and privilege escalation the hacker who is now inside the target network will upload the keystroke logging softwares in to the system. The software keystroke loggers will stay as a middle man between the keyboard driver and the CPU. That is all the keystroke details will directly come to the software so that the tool keeps a copy of them in a log and forwarding them to the CPU.

2.6.2 Trojan Horses & Backdoors
A Trojan horse is a destructive program that masquerades as a benign application. Unlike viruses , Trojan horses do not replicate themselves but they can be just as destructive. One of the most insidious types of Trojan horse is a program that claims to rid your computer of viruses but instead introduces viruses on to your computer. The term comes from a Greek story of the Trojan war in which the Greeks fie a giant wooden horse to their foes, the Trojans, ostensibly as a peace offering. But after the Trojans drag the horse inside their city walls, Greek soldiers sneak out of the horse`s hollow belly and open the city gates, allowing their compatriots to pour in and capture Troy. Generally a Trojan is a malware that runs programs that you are either unaware of or don`t want to have tunning on your system. The hackers will place these Trojan softwares inside the network and will go out. Then after sometimes when he come back the Trojan software either authenticate the hacker as a valid user or opens some other ports for the hacker to get in. There are many genere of Trojans like
password sending/capturing
FTP Trojans
Keystroke captures Trojans
Remote access Trojans
Destructive Trojans
Denial of Service Trojans
Proxy Trojans
The Trojans can be introduced through chat clients, email attachments,physical access to systems,file sharing,wrappers and through other P2P softwares. There are many examples for trojans like Tini, netcat, subseven, barkorffice etc. Tini is a very tiny Trojan which just listens to the port 7777. so after introducing the tini the hacker can send his commands to that port number. Netcat is another Trogen which have the ability to connect to any local port and could start out bound or inbound TCP or UDP connections to or from any ports. It can even return the command shell to the hacker through which the hacker can access the system. Subseven and barkorffice are other Trojans which have a client server architecture which means that the server part will reside in the target and the hacker can directly access the server with the knowledge of the user.
2.6.3 Wrappers
In the maintaining access phase in the hacking we usually upload some software in to the system so that for some needs. In order to keep the softwares and other data to be hidden from the administrator and other usual user the hackers usually use wrapper software to wrap their contents to some pictures, greeting cards etc so that they seem usual data to the administrators. What the wrapper softwares actually does is they will place the malicious data in to the white spaces in the harmless data. There are some tools like blindslide which will insert and extract the data into just jpeg or bmp pictures. Actually what they does is that they will insert the data into the white spaces that may be present in the files. The most attractive thing is that most of the time they will not alter the size of the file.
2.6.4 Elitewrap
This is a very notorious wrapper software. Elitewrap is a command line tool which wraps one or more Trojans in to a normal file. After the processing the product will look like one program while it will contain many softwares. The speciality of this is that we can even make the Trojans,packed in to it, to get executed when the user open that file. For example consider the case in which the netcat Trojan is packed to a flash greeting card. Now when the user opens the card, in the background, the netcat will start working and will start listening to some ports which will be exploited by the hackers.
2.7 Clearing Tracks
Now we come to the final step in the hacking. There is a saying that everybody knows a good hacker but nobody knows a great hacker. This means that a good hacker can always clear tracks or any record that they may be present in the network to prove that he was here. When ever a hacker downloads some file or installs some software,its log will be stored in the server logs. So inorder to erase those the hacker uses man tools. One such tool is windows resource kit`s auditpol.exe. This is a command line tool with which the intruder can easily disable auditing. There are some other tools like Eslave which directly clears all the event logs which tell the administrator that some intruder has come in. Another tool which eliminates any physical evidence is the evidence eliminator. Sometimes apart from the server logs some other informations may be stored temporarily. The Evidence Eliminator deletes all such evidences.

2.7.1 Winzapper
This is another tool which is used for clearing the tracks. This tool will make a copy of the log and allows the hackers to edit it. Using this tool the hacker just need to select those logs to be deleted. Then after the server is rebooted the logs will be deleted.

3. CONCLUSION
One of the main aim of the seminar is to make others understand that there are so many tools through which a hacker can get in to a system. There are many reasons for everybody should understand about this basics. Lets check its various needs from various perspectives. Student A student should understand that no software is made with zero vulnerabilities. So while they are studying they should study the various possibilities and should study how to prevent that because they are the professionals of tomorrow. Professionals Professionals should understand that business is directly related to security. So they should make new software with vulnerabilities as less as possible. If they are not aware of these then they wont be cautious enough in security matters. Users The software is meant for the use of its users. Even if the software menders make the software with high security options with out the help of users it can never be successful. Its like a highly secured building with all doors open carelessly by the insiders. So users must also be aware of such possibilities of hacking so that they could be more cautious in their activities. In the preceding sections we saw the methodology of hacking, why should we aware of hacking and some tools which a hacker may use. Now we can see what can we do against hacking or to protect ourselves from hacking. The first thing we should do is to keep ourselves updated about those softwares we and using for official and reliable sources. Educate the employees and the users against black hat hacking. Use every possible security measures like Honey pots, Intrusion Detection Systems, Firewalls etc. Every time make our password strong by making it harder and longer to be cracked. The final and foremost thing should be to try ETHICAL HACKING at regular intervals.

REFERENCES
1. http://netsecurity.about.com
2. http://researchweb.watson.ibm.com
3. http://eccouncil.org
4. http://ethicalhacker.net
5. http://infosecinstitute.com
6. http://searchsecurity.techtarget.com
Reply
#2
ppt please
Reply
#3
ethical hacking, needs a seminar report and presentation
Reply
#4
PLease send full report on "ETHICAL HACKING".
Reply
#5
hiii
i want dis report with project
Reply
#6


To get more information about the topic " ETHICAL HACKING A SEMINAR REPORT " please refer the page link below
http://studentbank.in/report-ethical-hac...5#pid53295
Reply
#7
To get more information about the topic " ethical hacking full report" please refer the page link below

http://studentbank.in/report-ethical-hac...7#pid52827

http://studentbank.in/report-ethical-hac...ull-report
http://studentbank.in/report-ethical-hac...ort?page=2

http://studentbank.in/report-ethical-hac...ort?page=3

http://studentbank.in/report-ethical-hac...ort?page=4
Reply
#8

To get more information about the topic " ethical hacking full report" please refer the page link below

http://studentbank.in/report-ethical-hac...7#pid52827

http://studentbank.in/report-ethical-hac...ull-report
http://studentbank.in/report-ethical-hac...ort?page=2

http://studentbank.in/report-ethical-hac...ort?page=3

http://studentbank.in/report-ethical-hac...ort?page=4
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: dmpec com cn mail,
Popular Searches: hacking seminar on system implementation, hacking mini project, ports, technology related ethical, ethical hacking report docvable machines impact factor, firecell hacking seminardical engineering, full details about in uindi ethical hacking,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Optical Computer Full Seminar Report Download computer science crazy 46 66,337 29-04-2016, 09:16 AM
Last Post: dhanabhagya
  ethical hacking full report computer science technology 41 74,441 18-03-2016, 04:51 PM
Last Post: seminar report asees
  Digital Signature Full Seminar Report Download computer science crazy 20 43,684 16-09-2015, 02:51 PM
Last Post: seminar report asees
  HOLOGRAPHIC VERSATILE DISC A SEMINAR REPORT Computer Science Clay 20 39,229 16-09-2015, 02:18 PM
Last Post: seminar report asees
  Computer Sci Seminar lists7 computer science crazy 4 11,412 17-07-2015, 10:29 AM
Last Post: dhanyasoubhagya
  Steganography In Images (Download Seminar Report) Computer Science Clay 16 25,712 08-06-2015, 03:26 PM
Last Post: seminar report asees
  Mobile Train Radio Communication ( Download Full Seminar Report ) computer science crazy 10 27,937 01-05-2015, 03:36 PM
Last Post: seminar report asees
  A SEMINAR REPORT on GRID COMPUTING Computer Science Clay 5 16,208 09-03-2015, 04:48 PM
Last Post: iyjwtfxgj
  SQL INJECTION A SEMINAR REPORT Computer Science Clay 10 12,099 18-10-2014, 09:50 PM
Last Post: jaseela123d
  Image Processing & Compression Techniques (Download Full Seminar Report) Computer Science Clay 42 22,827 07-10-2014, 07:57 PM
Last Post: seminar report asees

Forum Jump: