Numerical Simulation for Aerodynamic Characteristics of Low Altitude and Subsonic
#1

[attachment=13306]
Numerical Simulation for Aerodynamic Characteristics of Low Altitude and Subsonic Flight Vehicle
Abstract
—In order to analyze the drag characteristics of the vehicle having different war head and empennage, the computational fluid dynamics numerical simulation was used. The method was based on fully hexahedral mesh and three-dimensional Navier-Stokes equations and Spalart-Allmaras turbulence model. Through numerical simulation the flow field structures and computational aerodynamic characteristics were obtained. The results showed that using Kaman figure war head and proper trapeziform empennage can reduce the drag characteristics of the missile and the results will provide evidence to optimize the configuration of the missile in engineering design.
Keywords-drag characteristics; numerical simulation; stabilization; wrap around empennage; trapeziform empennage
I. INTRODUCTION
The velocity and flight altitude of the flight vehicle are low and the free flight is used for the control system. The drag of the flight vehicle includes the friction drag, drag induced by lift, the pressure differentia drag and interferential drag. The drag should be decreased and the stabilization should be enhanced at the condition of the tube-launching.
The computational fluid dynamics method was used to calculate the flow field of six cases with different warhead and empennage sharps. Some methods to decrease the drag were obtained and the results provided the reference for the design of the flight vehicle shape.
II. SIMULATION OF THE LOW ALTITUDE AND SUBSONIC FLIGHT VEHICLE
A. Conditions of the Simulation and the Flight Vehicle Shape
Fig. 1 shows the shape and the surface meshes of the flight vehicle. The short and thick shape was used at the restriction of the launching space. The shape is disadvantageous for the drag decrease and stabilization. Six cases including four factors were calculated to research the aerodynamics of the flight vehicle. Table 1 presents the calculated scheme. The flight velocity is subsonic and the flight attack angle is between 0~10 degree.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: aerodynamic consideration for automobile body, seminar aerodynamic shape of the buildings ppt, current aerodynamic topics, numerical propulsion system simulation, tia eia 899 electrical characteristics of multipoint low voltage differential signaling, seminar on improve aerodynamic performancea of an aerospace vehicle, car aerodynamic thesis download,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  FLUID DYNAMIC SIMULATION FOR PROPELLER seminar class 2 1,792 17-12-2012, 03:25 PM
Last Post: seminar details
  Numerical analysis of two-stroke free piston engine operating on HCCI combustion smart paper boy 1 1,652 14-02-2012, 10:17 AM
Last Post: seminar paper
  Fatigue Behavior and Life Predictions of Forged Steel and Powder Metal Connecting Rod smart paper boy 1 2,181 20-06-2011, 10:04 AM
Last Post: smart paper boy
  DESIGN AND FABRICATION OF ABS SIMULATION KIT seminar topics 2 2,726 24-05-2011, 09:07 AM
Last Post: seminar-database
  Navier-Stokes Simulation of Unsteady Rotor- Airframe Interaction with Momentum Source seminar class 0 1,535 07-05-2011, 03:10 PM
Last Post: seminar class
  Flutter Characteristics of an Over-the-Wing Engine Mount Business-Jet Configuration seminar class 0 1,500 04-05-2011, 03:50 PM
Last Post: seminar class
  HEAVY TRUCK ADVANCED AERODYNAMIC TRAILER SYSTEM seminar class 0 1,371 02-05-2011, 04:26 PM
Last Post: seminar class
  ASSEMBLY AND DIS-ASSEMBLY OF 6-CYLINDER COMPRESSION IGNITION ENGINE AND ITS SYSTEMS seminar class 0 2,152 19-04-2011, 01:14 PM
Last Post: seminar class
  Effect of Rim Thickness on Bending Stresses in Low Addendum Large Spur Gears project report helper 0 1,247 13-10-2010, 10:57 AM
Last Post: project report helper
  An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber project report maker 0 1,281 05-07-2010, 11:01 PM
Last Post: project report maker

Forum Jump: