download presentation ppt on electric locomotive
#1

hi am priya I want detail about electric train
Reply
#2
French engineering giant Alstom will start construction of the electric locomotive manufacturing factory at Madhepura from July this year.

After Indian Railways signed agreements with Alstom and US-based GE for the manufacturing of electric and diesel locomotives, respectively, Bharat Salhotra, managing director, Alstom India & South Asia, told that the first five electric locomotives were expected to be imported to India.

According to the contract signed, Alstom will manufacture and maintain 800 electric locomotives for Indian Railways between 2018 and 2028.
Reply
#3

Introduction
This page offers a selection of terms used in electric locomotive traction. If you can't find it here, try our Modern Railway Glossary page or use the Search facility. There are more Articles on Electric Traction on this site as follows: Electric Traction Power Supplies - DC Traction Motor Systems - Electric Traction Drives - Multiple Unit Operation - Electronic Power for Traction

Electric Locomotive Parts

Click on the part names for a description. This diagram shows an AC electric locomotive, i.e a locomotive collecting AC power from an overhead line. The red lines on the diagram indicate the single phase AC circuit, the green lines the DC circuits and the purple lines the 3-phase AC circuits. A locomotive using DC traction current is similar, except that there is no single phase AC circuit or transformer. The current passes directly from the pantograph (or shoe) to the main and auxiliary inverters.

Asynchronous Motor
Modern traction motor type using three phase AC electrical supply and now the favoured design for modern train traction systems. Can be used on DC and AC electrified railways with suitable control electronics and on diesel-electric locomotives. See the article on AC and DC Motors.

Axle Brush
The means by which the power supply circuit is completed with the substation once power has been drawn on the locomotive. Current collected from the overhead line or third rail is returned via the axle brush and one of the running rails. See also Power Supply - return.

Balancing Speed
See here for description.

Battery
All trains are provided with a battery to provide start up current and for supplying essential circuits, such as emergency lighting, when the line supply fails. The battery is usually connected across the DC control supply circuit.

Bucholz Relay
A device inserted in the oil cooling circuits of electric locomotive transformers to detect low oil pressure. In this event the relay trips out the power system. Often a source of spurious circuit breaker trips if not carefully calibrated.

Camshaft
Most DC electric traction power circuits use a camshaft to open or close the contactors controlling the resistances of the traction motor power circuit. The camshaft is driven by an electric motor or pneumatic cylinder. The cams on the shaft are arranged to ensure that the contactors open and close in the correct sequence. It is controlled by commands from the driver's cab and regulated by the fall of current in the motor circuit as each section of resistance is cut out in steps. The sound of this camshaft stepping can be heard under many older (pre electronics) trains as they accelerate. See also Notching Relay.

Cannon Box
Sleeve used to mount a traction motor on axle in electric power bogies and sometimes including an axle brush.

Chopper Control
A development in electric traction control which eliminates the need for power resistors by causing the voltage to the traction motors to be switched on and off (chopped) very rapidly during acceleration. It is accomplished by the use of thyristors and will give up to 20% improvement in efficiency over conventional resistance control.

Circuit Breaker
An electric train is almost always provided with some sort of circuit breaker to isolate the power supply when there is a fault, or for maintenance. On AC systems they are usually on the roof near the pantograph. There are two types - the air blast circuit breaker and the vacuum circuit breaker or VCB. The air or vacuum part is used to extinguish the arc which occurs as the two tips of the circuit breaker are opened. The VCB is popular in the UK and the air blast circuit breaker is more often seen on the continent of Europe.

Contactor
Similar to a relay in that it is a remotely operated switch used to control a higher power local circuit. The difference is that contactors normally latch or lock closed and have to be opened by a separate action. A lighting contactor will have two, low voltage operating coils, one to "set" the contactor closed to switch on the lights; the other to "trip" off the lights. Click here for diagrams and more detail.

Converter
Generic term for any solid state electronic system for converting alternating current to direct current or vice versa. Where an AC supply has to be converted to DC it is called a rectifier and where DC is converted to AC it is called an inverter. The word originated in the US but is now common elsewhere.

Cooling Fans
To keep the thyristors and other electronic power systems cool, the interior of a modern locomotive is equipped with an air management system, electronically controlled to keep all systems operating at the correct temperature. The fans are powered by an auxiliary inverter producing 3-phase AC at about 400 volts.

Creep Control
A form of electronically monitored acceleration control used very effectively on some modern drive systems which permits a certain degree of wheel slip to develop under maximum power application. A locomotive can develop maximum slow speed tractive effort if its wheels are turning between 5% and 15% faster than actually required by the train speed.

DC Link
Used on modern electronic power systems between the single phase rectifier and the 3-phase inverter. It is easier to convert the single phase AC from the overhead line to the 3-phase required for the motors by rectifying it to DC and then inverting the DC to 3-phase AC.

Dynamic Braking
A train braking system using the traction motors of the power vehicle(s) to act as generators which provide the braking effort. The power generated during braking is dissipated either as heat through on-board resistors (rheostatic braking) or by return to the traction supply line (regenerative braking). Most regenerative systems include on board resistors to allow rheostatic braking if the traction supply system is not receptive. The choice is automatically selected by the traction control system. See also the Dynamic Brake section of our Brakes Page.

Earth Fault Relay
See Ground Relay.

Grid
Train or locomotive mounted expanded steel resistor used to absorb excess electrical energy during motor or braking power control. Often seen on the roofs of diesel electric locomotives where they are used to dissipate heat during dynamic braking.

Ground Relay
An electrical relay provided in diesel and electric traction systems to protect the equipment against damage from earths and so-called "grounds". The result of such a relay operating is usually a shut-down of the electrical drive. Also sometimes called an Earth Fault Relay.

GTO Thyristor
Gate Turn Off thyristor, a thyristor which does not require a commutation (reverse flow circuit) circuit to switch it off. See Thyristor

IGBT
Most recent power electronics development. It is replacing the GTO thyristor as it is smaller and requires less current to operate the switching sequences. See Transistor upon which the technology is based.

Inverter
Electronic power device mounted on trains to provide alternating current from direct current. Popular nowadays for DC railways to allow three phase drive or for auxiliary supplies which need an AC supply. See also converter with which it is often confused.

Jerk Limit
A means by which starting is smoothed by adjusting the rate of acceleration of a train by limiting the initial acceleration rate upon starting. It could be described as limiting the initial rate of change of acceleration. Also used in dynamic braking.

Line Breaker
Electro-mechanical switch in a traction motor power circuit used to activate or disable the circuit. It is normally closed to start the train and remains closed all the time power is required. It is opened by a command from the driving controller, no-volts detected, overload detected and (were required) wheel spin or slide detected. It is linked to the overload and no-volt control circuits so that it actually functions as a protective circuit breaker.

Master Controller
Driver's power control device located in the cab. The driver moves the handle of the master controller to apply or reduce power to the locomotive or train.

Motor Blowers
Traction motors on electric locomotives get very hot and, to keep their temperature at a reasonable level for long periods of hard work, they are usually fitted with electric fans called motor blowers. On a modern locomotive, they are powered by an auxiliary 3-phase AC supply of around 400 volts supplied by an auxiliary inverter.

Notching Relay
A DC motor power circuit relay which detects the rise and fall of current in the circuit and inhibits the operation of the resistance contactors during the acceleration sequence of automatically controlled motors. The relay operates a contactor stepping circuit so that, during acceleration of the motor, when the current falls, the relay detects the fall and calls for the next step of resistance to be switched out of the circuit. See DC Resistance Control and Camshaft.

No-Volt Relay
A power circuit relay which detected if power was lost for any reason and made sure that the control sequence was returned to the starting point before power could be re-applied. See Motor Protection.

Overload Relay
A power circuit relay which detected excessive current in the circuit and switched off the power to avoid damage to the motors. See Motor Protection above.

Pantograph
The current collection system used by locomotives and trains on routes electrified with overhead lines. The pantograph (often shortened to "pan") is held up by compressed air pressure. It is designed to collapse if it detects an obstruction. It can also be lowered manually to isolate the locomotive or train.

Rectifier
A converter consisting of thyristors and diodes which is used to convert AC to DC. A modern locomotive will usually have at least two, a "Main Rectifier" for the power circuits and one or more for the auxiliary circuits.

Relay
A remotely controlled switch which uses a low voltage control circuit. It will close (or open) a switch in a local circuit, usually of higher power. To see the principle of how it works, look here. See also Contactor.

Resistance Control
Method of traction motor control formerly almost universal on DC electric railways whereby the power to the motors was gradually increased from start up by removing resistances from the power circuit in steps. See more here. Originally this step control was done manually but it was later automatic, a relay in the circuit monitoring the rise and fall of current as the steps were removed. Many examples of this system still exist but new builds now use solid state control with power electronics.

SEPEX
Short form of SEParate EXcitement of traction motors where the armature and field coils of an electric motor are fed with independently controlled current. Click here for diagrams. This has been made much more useful since the introduction of thyristor control where motor control can be much more precise. SEPEX control also allows a degree of automatic wheel slip control during acceleration.

Shoegear
Equipment carried by a train and used for current collection on track mounted (third rail) power supply systems. Shoegear is usually mounted on the bogies close to the third rail. It is often equipped with devices to enable it to be retracted if required to isolate the car or on-board system which it supplies. See also the Power Supply page.

Synchronous Motor
Traction motor where the field coils are mounted on the drive shaft and the armature coils in the housing, the inverse of normal practice. Favoured by the French and used on the high speed TGV Atlantique trains, this is a single-phase machine controlled by simple inverter. Now superseded by the asynchronous motor.

Tap Changer
Camshaft operated set of switches used on AC electric locomotives to control the voltage taken off the main transformer for traction motor power. Superseded by thyristor control.

Thyristor
A type of diode with a controlling gate which allows current to pass through it when the gate is energised. The gate is closed by the current being applied to the thyristor in the reverse direction. Thyristors (also referred to as choppers) are used for traction power control in place of resistance control systems. A GTO (Gate Turn Off) thyristor is a development in which current is turned off is by applying a pulse of current to the gate.

Transformer
A set of windings with a magnetic core used to step down or step up a voltage from one level to another. The voltage differences are determined by the proportion of windings on the input side compared with the proportion on the output side. An essential requirement for locomotives and trains using AC power, where the line voltage has to be stepped down before use on the train.

Transistor
The original electronic solid state device capable of controlling the amount of current flowing as well as switching it on and off. In the last few years, a powerful version has been applied to railway traction in the form of the Insulated Gate Bipolar Transistor (IGBT). Its principle advantage over the GTO Thyristor is its speed of switching and that its controls require much smaller current levels.

Wheel Spin
On a steam locomotive, the driver must reduce the steam admission to the cylinders by easing closed (or partially closed) the throttle/regulator when he hears the wheels start to spin. On diesel or electric locomotives, the current drawn by individual or groups of traction motors are compared - the motor (or group) which draws proportionally less amps than the others is deemed to be in a state of slip - and the power is reduced. Some systems - EMD Super Series for one - measure known wheel speed against ground speed as registered on a Doppler Radar. Many locomotives additionally use sand, which is applied to the wheel/rail contact point to improve adhesion - this is either controlled automatically, or manually by the driver (Foamer? No Way, 25 Apr 98). See also Wheel Spin Relay.

Wheel Spin Relay (WSR)
A relay in older traction motor control circuits used to detect wheel spin or slide by measuring the current levels in a pair of motors on a bogie and comparing them. The idea is to prevent motor damage by preventing an overspeeding motor causing an unacceptable rise in current in the other motor of the pair. If detected, the imbalance causes the control circuits to open the line breakers and reset the power control to the start position like a "no-volt" relay.

See also the DC Traction Motor Systems, Multiple Unit Operation, Electric Traction Pages Drives, and Electronic Power pages. Tony Woof has written an excellent article on the basic principles of Electric Traction Technology for his site.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: ppt on locomotive compressor, research papers on electric locomotive and emus, ppt locomotive engine, report on electric locomotive, air brake system locomotive ppt presentation, seminar topic on electric locomotive, ppt on locomotive boiler,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  modern electric traction h partab book pdf to download 2 12,154 15-02-2019, 08:14 AM
Last Post: chirag bafna
  specimen presentation of letters issued by company pdf 2 2,093 08-01-2019, 01:07 PM
Last Post:
  sp project of specimen presentation of letters issued by company 2 2,276 09-12-2018, 08:54 PM
Last Post:
  5s marathi presentation pdf ppt 0 843 19-10-2018, 03:48 PM
Last Post: Guest
  presentation on automobile ppt free download 0 625 19-10-2018, 05:45 AM
Last Post: Guest
  electric iron circuit diagram free 0 678 18-10-2018, 06:40 PM
Last Post: Guest
  specimen presentation of share certificate for different kinds of shares introduction 0 874 16-10-2018, 09:10 PM
Last Post: Guest
  specimen presentation of share certificate for different kinds of shares introduction 0 763 16-10-2018, 09:06 PM
Last Post: Guest
  anchoring script for powerpoint presentation competition 0 888 03-10-2018, 10:59 PM
Last Post: Guest
  free download radioactive pollution ppt 0 828 26-09-2018, 09:03 PM
Last Post: Guest

Forum Jump: