09-03-2011, 09:45 AM
Presented By
Naaimat Muhammed
[attachment=9824]
DIGITAL ELECTRONICS, MICROPROCESSORS, AND COMPUTERS
Introduction
• The computer you are using to read this page uses a microprocessor to do its work.
• The microprocessor is the heart of any normal computer .
• The microprocessor you are using might be a Pentium, a K6, a PowerPC, a Sparc or any of the many other brands and types of microprocessors.
• The rate of growth of electronics, instrumentation, and microcomputer technology is nearly incomprehensible.
• Microcomputers or microprocessors are now found in most laboratory instruments, including even balances and pH meters.
• Digital circuits offer some important advantages over their analog counterparts.
• Digital circuits are less susceptible to environmental noise.
• Digitally encoded signals can be transmitted with a higher degree of signal integrity .
• Digital signals may be transmitted directly to digital computers.
Microprocessor History
• A microprocessor -- also known as a CPU or central processing unit .
• It is a complete computation engine that is fabricated on a single chip .
• The first microprocessor was the Intel 4004, introduced in 1971.
• The 4004 was not very powerful -- all it could do was add and subtract, and it could only do that 4 bits at a time .
• The 4004 powered one of the first portable electronic calculators.
• Intel 4004
• Intel 8080
• The first microprocessor to make it into a home computer was the Intel 8080
• Introduced in 1974 ,it was a complete 8-bit computer on one chip.
• The first microprocessor to make a real splash in the market was the Intel 8088,which was improvements on the basic design of the 8088.
Analog and Digital Signals
• Chemical signals are of two types, digital and analog.
• An example of a digital, or discrete, chemical signal is the radiant energy produced by the decay of a radioactive species.
• The signal consists of a series of pulses of energy produced as individuals atoms decay.
• These pulses can be converted to electrical pulses and counted.
• The form that the signal takes depends on how one looks at the signal.
• A properly designed detector can respond to the individual photons, producing a signal that consists of a series of pulses that can be measured.
Arithmetic With Binary Numbers
• In typical digital measurement, a high-speed electronic counter is used to count the number of pulses that occur within a specified set of boundary conditions.
• Examples of signals and boundary conditions include number of photons or alpha decay particles emitted by an analyte per second or the number of drops of titrant per millimole of analyte.
• Counting such signals electronically requires that they first be transduced to provide a series of pulses of more or less equal voltage.
• For this reason, electronic counting is performed by binary numbers; here, only two digits, 0 and 1, are required to represent any number.
Microprocessor
• The following diagram shows an extremely simple microprocessor capable of doing those three things:
• This is about as simple as a microprocessor gets. This microprocessor has:
• An address bus (that may be 8, 16 or 32 bits wide) that sends an address to memory
• A data bus (that may be 8, 16 or 32 bits wide) that can send data to memory or receive data from memory
• An RD (read) and WR (write) line to tell the memory whether it wants to set or get the addressed location
• A clock line that lets a clock pulse sequence the processor
• A reset line that resets the program counter to zero (or whatever) and restarts execution
Relationship Between Decimal and Binary
• An instrument for counting the number of electrical pulses from a transducer per unit time consists of the following components
Signal Shapers
• This is essentially an operational amplifier that makes use of a voltage comparator to convert the signal to the square wave form
Binary Counter
• Electronic counters employ a series of binary circuits( or binaries) to electrical pulses
• These circuits are basically electronic switches that have two logic states, on/l and off/0.
• Each binary circuit can the be used to represent one digit of a binary number(or the coefficient of a power of two) a convenient binary circuits for counting is the so-called flip-flop.
Binary Coded Decimal System
• This is the system that converts from binary to decimal numbers
Scalers
• The process of reducing a count by a known fraction is called scaling, and becomes important when the frequency of a signal is greater than the counting device can accommodate.
• In this situation, a scaler is introduced between the signal source and the counter
Clocks
• Many digital applications require a highly reproducible and accurately known frequency source to be used in conjunction with the measurement of time.
• Generally, these frequency sources are based upon quartz crystals.
Digital to Analog Converters
• Digital signals are often converted to their analog counterparts for the control of instruments or for display by readout devices such as meters and analog recorders
• One common method is to use a circuit similar to a summing circuit of an operational amplifier
Microprocessors and Microcomputers
• A microprocessor is a large-scale integrated circuit made up of tens and even hundreds of thousands of transistors, resistors, switches, and other circuit elements miniaturized to fit on a single silicon chip.
• Microcomputers are finding an ever-increasing use in controlling analytical instruments and in processing, storing, and displaying the data derived from them.
• Automation leads to more rapid data acquisition, which shortens the time required for analysis or increases precision by providing time for additional replicate measurements to be made.
Applications of Computers
• Computer interactions with analytical instruments are of two types.
• Active Applications
• Passive Applications
