Contactless Energy Transfer System
#1

Most mains operated equipment in use today is connected to the supply via plugs and sockets. These are generally acceptable in benign environments but can be unsafe or have limited life in the presence of moisture. In explosive atmospheres and in undersea applications special connectors must be used. This paper describes a technique, the Contactless Energy Transfer System (CETS), by which electrical energy maybe transmitted, without electrical connections or physical contact, through non-magnetic media of low conductivity. CETS, which has been used to transfer upto 5KWs across a 10mm gap, employs high frequency magnetic coupling and enables plug in power connections to be made in wet or hazardous environmental conditions without the risk of electric shock, short-circuiting or sparking. Energy may be transmitted without the necessity for accurately manufactured ?plug and socket? mechanisms and may be transmitted from source to load even when there is a relative motion. Load source voltage matching may be made inherent to the system..
Reply
#2
yeah i want to know more...
Reply
#3
yeah i want to know more...
Reply
#4
what the whole copy
Reply
#5
want to know more
Reply
#6
hi evn i wnat to knw more
Reply
#7
plz giv us total knowledge abt it
Reply
#8
(21-09-2008, 09:44 AM)remshad_m Wrote: Most mains operated equipment in use today is connected to the supply via plugs and sockets. These are generally acceptable in benign environments but can be unsafe or have limited life in the presence of moisture. In explosive atmospheres and in undersea applications special connectors must be used. This paper describes a technique, the Contactless Energy Transfer System (CETS), by which electrical energy maybe transmitted, without electrical connections or physical contact, through non-magnetic media of low conductivity. CETS, which has been used to transfer upto 5KWs across a 10mm gap, employs high frequency magnetic coupling and enables plug in power connections to be made in wet or hazardous environmental conditions without the risk of electric shock, short-circuiting or sparking. Energy may be transmitted without the necessity for accurately manufactured ?plug and socket? mechanisms and may be transmitted from source to load even when there is a relative motion. Load source voltage matching may be made inherent to the system..

thnx
Reply
#9
(21-09-2008, 09:44 AM)remshad_m Wrote: Most mains operated equipment in use today is connected to the supply via plugs and sockets. These are generally acceptable in benign environments but can be unsafe or have limited life in the presence of moisture. In explosive atmospheres and in undersea applications special connectors must be used. This paper describes a technique, the Contactless Energy Transfer System (CETS), by which electrical energy maybe transmitted, without electrical connections or physical contact, through non-magnetic media of low conductivity. CETS, which has been used to transfer upto 5KWs across a 10mm gap, employs high frequency magnetic coupling and enables plug in power connections to be made in wet or hazardous environmental conditions without the risk of electric shock, short-circuiting or sparking. Energy may be transmitted without the necessity for accurately manufactured ?plug and socket? mechanisms and may be transmitted from source to load even when there is a relative motion. Load source voltage matching may be made inherent to the system..
Reply
#10
yeah.. i would like to know more abt it... please do help me... the topic sounds very interesting...
Reply
#11
tell more about contactless energy transfer
Reply
#12
please read this for more
Contactless Energy Transfer
A Better Solution For A Mobile World
Talk to any plant engineer or production system designer and youâ„¢ll find that electrical wiring is the bane of their existence. From installing the wires, to rewiring as production lines need to be changed, to repairing damage caused by careless workers, electrical wires represent an ongoing cost and risk for downtime in manufacturing plants.
Until recently, the miles of electrical wiring that snake around any manufacturing facility, hanging down from ceilings and extending across corridors between equipment, have been viewed as a necessary aspect of industrial automation.
But today industry is moving toward a wireless world. Like consumers with their cell phones, laptops and PDAâ„¢s, industrial companies want wireless technologies that improve versatility, reduce costs and maintain connectivity. One of the latest developments to draw interest among engineering personnel is contactless energy transfer for powering and controlling motors
While wireless communication is now common in factories, wirelessly transferring 16kW of electricity through the air to power equipment is a relatively new phenomenon in the United States.
In a typical automated manufacturing environment, where carts full of parts must be moved between the different stages of a production process, a contactless system transfers electrical energy inductively from an insulated conductor in a fixed installation to one or more mobile loads. Electromagnetic coupling is realized via an air gap, so it is not subject to wear and costly maintenance.
Contactless energy transfer reduces costs in several ways: It eliminates festooning or overhanging utilities. The underground wiring is compact and poses no trip hazards. There is no carriage to run out on the shop floor. There are also no pits to be dug to drop in trailing utilities.
In addition to lower costs, a mobile system using contactless energy transfer provides greater versatility: The contactless system enables more flexible track layout with curves and switches, simple segmentation of tracks, which makes it easy to extend a track or change travel directions, and higher speeds.
Contactless energy transfer is ideal for applications where:
¢ The mobile equipment has to cover long distances
¢ A variable, extendable track layout is required
¢ High speeds have to be achieved
¢ The energy transfer has to be maintenance free
¢ Additional environmental contaminants are not permitted in sensitive areas
¢ The operation takes place in wet and humid areas
Maintenance and ambient conditions are important factors in constructing systems for material handling and transportation applications, such as automotive assembly, storage and retrieval logistics and sorting. Typical applications that could benefit from contactless energy transfer include:
¢ Overhead trolleys
¢ Conveyor trolleys
¢ Guided floor conveyors
¢ Push-skid conveyors
¢ Storage and retrieval units
¢ Pallet transportation systems
¢ Baggage handling
¢ Panel gantries
¢ Elevator equipment
¢ Amusement park rides
¢ Battery charging stations
By replacing a drag-chain system in a conveyor trolley that transports and sorts pallets, for example, contactless energy transfer enables pallets to transverse over longer distances. Complicated holders for drag chains are eliminated, as is downtime for repairing cable breaks and battery charging. Repairs for wear from bending or torsion are also eliminated.
The wear-free power supply in a contactless system has many advantages in designing and maintaining push-skid conveyors used in automotive assembly, for example, or in storage and retrieval units in a high-bay warehouse. Because there is no conductor rail, there is no danger of introducing contaminants from system leakages and no components that are difficult to reach for maintenance. Problems with fitting the platforms into conveyor belts are also eliminated, since thereâ„¢s no need for high mechanical tolerances between the line cable and pick-up.
Perhaps the biggest advantage of a system based on contactless energy transfer is higher system availability because the system is essentially maintenance free. In a manufacturing environment where change is a constant and speed is an imperative, the versatility, flexibility and reliability of contactless energy transfer systems can reduce the wear-and-tear on plant engineers as well as equipment.
About SEW-EURODRIVE
Engineering excellence and customer responsiveness distinguish SEW-EURODRIVE, a leading manufacturer of integrated power transmission and motion control solutions. SEW introduced the worldâ„¢s first gearmotor more than 75 years ago and its systems are known for high performance and rugged reliability in the toughest operating conditions.
SEW-EURODRIVE offers a comprehensive range of electromechanical and electronic drive solutions. The companyâ„¢s modular product designs allow components to be quickly and cost-efficiently assembled in literally millions of different configurations to create a truly customized solution for every customer.
With its global headquarters in Germany and sales of more than 1.5 billion Euros, the privately held company has more than 11,000 employees with a presence in 46 countries worldwide. SEW operates from 12 manufacturing facilities and 63 regional assembly centers located around the world.
U.S. operations include a state-of-the-art manufacturing facility, five regional assembly centers, more than 60 technical sales offices and hundreds of distributors and support specialists. This enables SEW-EURODRIVE to provide local manufacturing, service and support, coast-to-coast and around the world.
Reply
#13
and this also
http://deboeijdocs/deboeij_ias2006_cet.pdf
http://ieeexplore.ieeeiel5/7205/19411/00...ber=900035
http://ta.twi.tudelft.nl/nw/users/vuik/spiral.pdf
http://highbeamdoc/1G1-158386785.html
http://lai.epfl.ch/page34944.html
Reply
#14
sounds interesting...
plzz send me whole copy...thanks...
Reply
#15
read this aarticles also
its surely helps you
[attachment=75]
http://ccut.edu.tw/adminSection/ee/downl...System.pdf
Reply
#16
i want more full deatiled seminars
Reply
#17
need full content
Reply
#18
read http://gotocontroldownLoad/files/wp_sew_energytransfer.pdf
http://deboeijdocs/deboeij_ias2006_cet.pdf
http://freepatentsonline6173899.html


surely help you
Reply
#19
sir i want the fullreport on this topic
Reply
#20
please read
http://seminarsprojects.in/thread-149-page-1.html
http://seminarsprojects.in/thread-149-page-3.html
http://seminarsprojects.in/thread-149-page-2.html
http://researchandmarketsreports/686851/wireless_power_supplies_and_contactless.pdf
http://citeseerx.ist.psu.edu/viewdoc/dow...1&type=pdf


i hope this links may help you
Reply
#21
Contactless Energy Transfer System
plz give more data and links
Reply
#22
Hi,
visit this thread for more info:
http://studentbank.in/report-contactless...bile-world
Reply
#23
new topic in paper s of ece
wanted plese sen drto momidivenkatesh[at]gmail.com
Reply
#24
we want some more detailed info regarding this topic, so that we can put a research paper on it
Reply
#25
I also want to know abt this........its an intresting topic.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: powered by mybb energy transfer in motion, transfer function of d c generator, where is the toughest, who is elena brooke cauley, contactless card reader, high efficiency contactless energy transfer system with powerjavascript, mp techer transfer 2015,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Adaptive piezoelectric energy harvesting circuit for wireless remote power supply electronics seminars 3 4,555 18-02-2016, 02:18 PM
Last Post: seminar report asees
  renewable energy resources ppt computer science technology 12 25,874 25-05-2013, 11:21 AM
Last Post: computer topic
  Seminar on Save Energy computer girl 2 10,372 03-04-2013, 10:52 AM
Last Post: computer topic
  ELECTROLYTIC HYDROGEN : A FUTURE TECHNOLOGY FOR ENERGY STORAG seminar projects crazy 13 11,418 12-12-2012, 11:05 PM
Last Post: Guest
  ELECTRICAL ENERGY LOSS IN RURAL DISTRIBUTION FEEDERS- A CASE STUDY computer girl 0 1,353 08-06-2012, 02:10 PM
Last Post: computer girl
  THERMOELECTRIC WASTE HEAT RECOVERY AS A RENEWABLE ENERGY SOURCE computer girl 0 1,081 07-06-2012, 05:37 PM
Last Post: computer girl
  Residential Piezoelectric Energy Sources electronics seminars 1 2,249 14-03-2012, 01:27 PM
Last Post: seminar paper
  RENEWABLE ELECTRIC ENERGY SOURCES seminar class 2 4,075 14-03-2012, 12:33 PM
Last Post: seminar paper
  RENEWABLE ENERGY SOURCES FOR RURAL ELECTRIFICATION project topics 1 2,722 14-03-2012, 12:33 PM
Last Post: seminar paper
  Comparison between four piezoelectric energy harvesting circuits electronics seminars 1 1,807 18-02-2012, 01:16 PM
Last Post: seminar paper

Forum Jump: