06-06-2012, 01:16 PM
Code division duplexing
Abstract
Reducing interference in a cellular system is the most effective approach to increasing radio capacity and transmission data rate in the wireless environment. Therefore, reducing interference is a difficult and important challenge in wireless communications.
In every two-way communication system it is necessary to use separate channels to transmit information in each direction. This is called duplexing. Currently there exist only two duplexing technologies in wireless communications, Frequency division duplexing (FDD) and time division duplexing (TDD). FDD has been the primary technology used in the first three generations of mobile wireless because of its ability to isolate interference. TDD is seemingly a more spectral efficient technology but has found limited use because of interference and coverage problems.
Introduction
To utilize spectrum efficiently, two transmission techniques need to be considered: one is a multiple access scheme and the other a duplexing system. There are three multiple access schemes namely TDMA, FDMA and CDMA. The industry has already established the best multiple access scheme, code-division multiple access (CDMA), for 3G systems. The next step is to select the best duplexing system. Duplexing systems are used for two-way communications. Presently, there are only two duplexing systems used: frequency-division duplexing (FDD), and time-division duplexing (TDD). The former uses different frequencies to handle incoming and outgoing signals. The latter uses a single frequency but different time slots to handle incoming and outgoing signals.
CDMA overview
Interference and Capacity
One of the key criteria in evaluating a communication system is its spectral efficiency, or the system capacity, for a given system bandwidth, or sometimes, the total data rate supported by the system. For a given bandwidth, the system capacity for narrow band radio systems is dimension limited, while the system capacity of a traditional CDMA system is interference limited. Traditional CDMA systems are all self-interference system.
Three types of interference are usually considered. By ISI we mean InterSymbol Interference, which is created by the multi-path replica of the useful signal itself; MAI, or Mutual Access Interference, which is the interference created by the signals and their multi-path replica from the other users onto the useful signal; and ACI, or Adjacent Cell Interference, which is all the interfering signals from the adjacent cells onto the useful signal.
Why Reduce Interference In A Cellular System
Reducing interference in a cellular system is the most effective approach to increasing radio capacity and/or transmission data rate in the wireless environment. Therefore, reducing interference is a difficult and important challenge in wireless communications. The interference in an FDD system using a CDMA scheme is shown in Fig. 2. Looking at Fig. 3, we realize that a TDD system is very undesirable to use in a large-area cellular system.
CONCLUSION
We are convinced that CDMA is the best multiple access scheme when compared to all others for combating interference. However, the codes in CDMA can be more than one type of code. A set of smart codes can make a high-capacity CDMA system very effective without adding other technologies. The smart code plus TDD is called CDD, which is a new 3G technology. A CDD system is simpler in design and lower cost. CDD is an ideal system for a total IP network solution: new 3G technology + IP core network. Hopefully, a CDD system will be the system of choice for future 3G networks.