Check Valves: Wafer, Wafer-Lug, and Double Flanged Type
#1

Check Valves: Wafer, Wafer-Lug, and Double Flanged Type


.pdf   Double Flanged Type.pdf (Size: 260.38 KB / Downloads: 0)
General

SCOPE
This standard covers design, material, face-to-face dimensions,
pressure-temperature ratings, and examination, inspection,
and test requirements for gray iron, ductile iron, steel,
and alloy single and dual plate check valves. Valve configurations
include wafer, wafer-lug, and double flanged type with
facings that will permit installation between ASME and MSS
flanges that conform to the standards and specifications listed
in section 2.

VALVE NOMENCLATURE

The standard nomenclature for valve parts is shown in Figures
1, 2, 3, and 4. These figures illustrate some wafer, waferlug
and double flanged type check valve designs. Although
Figures 1, 2, 3, and 4 show typical designs, they are not to be
construed as precluding other available designs that comply
with the requirements of this standard.

Pressure-Temperature Ratings

VALVE RATING
The pressure-temperature rating of the valve will be the
lesser of the body rating or the seat rating.
BODY RATING
The valve body rating for various body materials shall be
as follows:
a. Gray iron: The pressure-temperature rating for the applicable
flange class as specified in ASME B16.1.
b. Ductile iron: The pressure-temperature rating for the
applicable flange class as specified in ASME B16.42.
c. Steel, nickel alloy or special alloy: The pressure-temperature
rating for Standard Class valves made of identical
material as listed in ASME B16.34.
SEAT RATING
The pressure-temperature rating of the valve seat for valves
furnished with resilient seating materials shall be specified by
the manufacturer. Temperature limitations of the seat material
shall be marked on the nameplate, as required in 7.1.2.

Design

BODY
1.1
The minimum body-wall thickness shall conform to
those shown in Tables 1A and 1B.
1.2
The face-to-face dimensions of valves (including
valves with ring-joint facings) shall conform to those shown
in Tables 2A and 2B.
1.3
The valve shall have a wafer, wafer-lug, or double
flanged body as specified in the purchase order. (Double
flanged valves are available where nut space between flanges
is adequate).
1.4
Valves larger than NPS 24 in Classes 150, 300, 400,
and 600 shall have body-flange bolt patterns suitable for the
wafer-lug or double flanged type, outside diameters suitable
for the wafer type, and gasket surface dimensions compatible
with the flange standards specified in the purchase order.
1.5
Ring-joint grooves shall conform to the dimensions
shown in either ASME B16.5 or ASME B 16.47 as applicable
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: how to check dv 2013 result, routing code and check number, download report on wafer bumping, wafer lug check valve pdf, fingerprint background check, when do interviewers check, wafer 20bumping,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  NC and CNC machines and Control Programming project report helper 1 3,224 12-05-2018, 10:11 AM
Last Post: Guest
  Enhance Identification And Removal of Threats By Misbehaving Nodes And Optimizing seminar class 0 710 12-04-2011, 11:13 AM
Last Post: seminar class
  Two Stroke Engine Using Reed Valves summer project pal 1 4,045 02-04-2011, 09:50 AM
Last Post: seminar class
  The Study and Application of Integrating Axiomatic Design and TRIZ for Conceptual Des project report helper 0 1,117 13-10-2010, 11:19 AM
Last Post: project report helper
  Magnetic Coupling Between DC Tachometer and Motor And Its Effect On Motion Control project topics 0 1,831 20-04-2010, 03:28 PM
Last Post: project topics
  Design and Control of Precise Robots with Active and Passive Kinematic Pairs project topics 0 1,387 20-04-2010, 03:27 PM
Last Post: project topics
  Globe valves Computer Science Clay 0 1,059 07-06-2009, 01:34 AM
Last Post: Computer Science Clay
  BOIMETRICS: AN UNPARELLED SECURITY CHECK SYSTEM Computer Science Clay 0 1,417 07-06-2009, 01:26 AM
Last Post: Computer Science Clay
  Modeling and Nonlinear analysis of Chemical and Biological Reactor-Separator systems computer science crazy 0 926 29-09-2008, 10:48 AM
Last Post: computer science crazy
  Globe valves computer science crazy 0 2,222 20-09-2008, 10:28 PM
Last Post: computer science crazy

Forum Jump: