Carrier Based PWM Algorithm for Indirect Matrix Converters
#1





Carrier Based PWM Algorithm for
Indirect Matrix Converters


Bingsen Wang Giri Venkataramanan
Department of Electrical and Computer Engineering
University of Wisconsin-Madison
1415 Engineering Drive
Madison, WI 53706 USA


Abstract— In this paper, the indirect matrix converter is
systematically studied with the single-pole-multiple-pole
representation. A carrier based PWM algorithm is developed
in two steps. First, the continuous modulation functions for all
the throws are derived based on the desired sinusoidal input
currents. Then the switching functions are derived from the
modulation functions with focus on the zero current
commutation. The proposed PWM algorithm is verified by
numerical simulation and hardware experimentation on a
laboratory prototype matrix converter.
I. INTRODUCTION
Various attractive features of the matrix converter, such as
a potential for high power density through elimination of
bulky passive components, high quality input and output
current/voltage waveforms, are leading to continuous
research efforts to enable their adoption widely [1-6]. While
the matrix converter was first studied as a class of frequency
changers realized using controlled switches by Gyugyi [7],
significant progress in high frequency synthesis was made by
Venturini in 1980 [8-10], with voltage transfer ratio limited
to one half. An improved modulation strategy with a voltage
transfer ratio of 0.866 was published in 1989 [11, 12]. In
addition to Venturini’s modulation methods, indirect
modulation methods based on a fictitious dc page link concept
[13-18] and space vector techniques have been developed
further [17, 19-23]. Irrespective of the modulation methods
used, robust commutation is critical, as has been extensively
investigated and examined [24-30]. As an alternative to the
standard 9-switch topology, the rectifier-inverter-without-dclink
structure and its variations have been carefully examined
[16, 31-37], leading to a simple and robust commutation on
the basis of its topological properties [34].
A space vector modulation scheme for the indirect matrix
converter (IMC) was developed with focus on the desired
output voltage in [34]. In this paper, a carrier based PWM
algorithm is proposed and derived based on the desired
sinusoidal input currents and output voltages. The derivation
proceeds with the calculation of modulation functions
followed by the generation of switching functions. Comparedto the space vector modulation scheme, the proposed carrier
based PWM algorithm demands less computational
complexity, while retaining the features of simple and robust
commutation. Thus, resources of the digital signal processor
commonly employed in the practical realization will be
available to assume complex computational tasks for the
controller rather than the modulator. Furthermore, with more
increasingly available field programmable gate array
(FPGA), the firmware implementation of carrier based PWM
algorithm may feature the reliability of hardware and the
flexibility of software.
The paper is organized as follows: In Section II the IMC is
represented using single-pole-multiple-throw (SPMT)
switches. The modulation functions are derived in Section III
followed by switching functions presented in Section IV. The
numerical simulation and the experimental results are
presented in Section V and Section VI, respectively. A
summary of the paper is presented in the concluding section.






http://ieeexplore.ieeeiel5/11209/36090/01712191.pdf
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: imc of kvat, what is a pwm, aircraft carrier steam catapult ramps bridle catchers, final converters in xlri, analysis and verification of two level random a periodic pwm schemes for dc dc converters, imc of britania, how do aircraft carrier catapults work seminar report,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  SEASON BASED STREET LIGHT SWITCHING BASED ON SENSORS project report helper 2 3,937 29-04-2015, 01:47 PM
Last Post: seminar report asees
  Tele-Graffiti (A Camera-Projector Based RemoteSketching System with Hand-Based User I computer science crazy 9 6,988 05-08-2013, 11:35 AM
Last Post: computer topic
  IMPLEMENTATION OF ALGORITHM FOR DIAGNOSIS OF ECG WAVEFORM USING MATLAB. seminar class 3 3,689 07-02-2013, 10:33 AM
Last Post: Guest
  ROBUST VARIABLE STEP-SIZE AFFINE PROJECTION ALGORITHM computer girl 0 756 05-06-2012, 03:11 PM
Last Post: computer girl
  REAL TIME IMAGE PROCESSING APPLIED TO TRAFFIC QUEUE DETECTION ALGORITHM Full report computer science technology 15 17,175 06-03-2012, 12:05 PM
Last Post: ravikumar.r
  Soft-Switched CCM Boost Converters With High Voltage Gain for High-Power Applications seminar surveyer 1 4,340 30-01-2012, 11:17 AM
Last Post: kamal19
  ISSUES ON SOLAR GENERATOR-INTERFACING WITH CURRENT-FED MPP-TRACKING CONVERTERS smart paper boy 0 1,150 15-07-2011, 10:34 AM
Last Post: smart paper boy
  Structure-BasedWater-Filling Algorithm in Multipath MIMO Channels seminar class 0 809 30-03-2011, 12:13 PM
Last Post: seminar class
  RADIX 2 DECIMATION IN FREQUENCY (DIF) ALGORITHM seminar class 0 2,250 21-02-2011, 10:51 AM
Last Post: seminar class
  RADER ALGORITHM summer project pal 0 1,233 29-01-2011, 07:23 PM
Last Post: summer project pal

Forum Jump: