bit for intelligent system design pptfree dounload
#1

Abstract
The principal of Built-in-test and self-test has been widely applied to the design and testing of complex, mixed-signal electronic systems, such as integrated circuits (IC s) and multifractional instrumentation [1].

A system with BIT is characterized by its ability to identify its operation condition by itself, through the testing and diagnosis capabilities built into its in structure. To ensure reliable performance, testability needs to be incorporated into the early stage of system and product design. Various techniques have been developed over the past decades to implement the BIT technique.

In the semiconductor, the objective of applying BIT is to improve the yield of chip fabrication, enable robust and efficient chip testing and better scope with the increasing circuit complexity and integration density. This has been achieved by having an IC chip generate its own test stimuli and measure the corresponding responses from the various elements within the chip to determine its condition.

In recent years, BIT has seen increasing applications in other branches of industry, eg. manufacturing, aerospace and transportation and for the purposes of system condition monitoring. In manufacturing systems, BIT facilitates automatic detection of toolwear and breakage and assists in corrective actions to ensure part quality and reduce machine downtime.

BIT TECHNIQUES
BIT techniques are classified:

a. on-line BIT

b. off-line BIT

On-line BIT:

It includes concurrent and nonconcurrent techniques. Testing occurs during normal functional operation.

Concurrent on-line BIST - Testing occurs simultaneously with normal operation mode, usually coding techniques or duplication and comparison are used. [3]

Nonconcurrent on-line BIST - testing is carried out while a system is in an idle state, often by executing diagnostic software or firmware routines

Off-line BIT:
System is not in its normal working mode it usually uses onchip test generators and output response analysers or micro diagnostic routines. Functional off-line BIT is based on a functional description of the Component Under Test (CUT) and uses functional high-level fault models. Structural off-line BIT is based on the structure of the CUT and uses structural fault models.

BIT FOR THE IC INDUSTRY
IC s entering the market today is more complex in design with a higher integration density. This leads to increased vulnerability of the chip to problems such as cross talk noise contamination, and internal power dissipation. These problems reduce the reliability of the chip. Further more, with increased chip density, it becomes mo0re difficult to access test points on a chip for external testing.

Also, testing procedures currently in use are time consuming, presenting a bottleneck for higher productivity [2]. These factors have led to the emergence of BIT in the semiconductor industry as a cost effective, reliable, and efficient quality control technique. Generally, adding testing circuitry on to the same IC chip increases the chip area requirement conflicting with the need for system miniaturization and power conception reduction.

On the other hand, techniques have been developed to allow the circuit-under-test (CUT) to be tested using existing on-chip hardware, thus keeping the area overhead to a minimum [1]. Also, the built-in-test functions obviate the need for expensive external testers. Further more; since the chip testing procedure is generated and performed on the chip itself, it takes less time as compared to one external testing procedure.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: bit for intelligent system design full report, cfd pdf download paper free dounload, bit for intelligent system design ppt free download, bit for intelligent system design ppt, a full report on bit for intelligent system design, ms dhoni presentation dounload, free dounload seminar report pdf for ic engine,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  industrial self supporting chimney design calculation 0 8,258 11-02-2021, 05:11 PM
Last Post:
  computer aided design vijayaraghavan book free download 2 10,004 27-11-2018, 04:49 PM
Last Post:
  vlsi design by kvkk prasad pdf 0 857 24-10-2018, 05:31 AM
Last Post: Guest
Information vlsi design by kvkk prasad pdf 0 870 23-10-2018, 10:27 PM
Last Post: Guest
  go kart design report in ieee format 0 5,887 06-10-2018, 04:21 PM
Last Post: Guest
  free download design of rectangular water tanks in xls 0 976 30-09-2018, 12:01 PM
Last Post: Guest
  attendance monitoring intelligent classroom circuit diagram 0 581 26-09-2018, 07:05 PM
Last Post: Guest
  computer aided design vijayaraghavan book free download 0 1,037 23-08-2018, 11:17 AM
Last Post: Guest
Rainbow design fabrication of hydraulic sheet bending machine wikipedia 3 1,168 15-08-2018, 06:10 PM
Last Post: Guest
  computer aided design vijayaraghavan book free download 0 654 26-07-2018, 08:04 PM
Last Post: Guest

Forum Jump: