Posts: 1
Threads: 1
Joined: Jan 2011
this is pcb layout for automatic college bell( based on AT89S8252&DS1307). but this is in reduce size. so i want the new pcb layout for automatic college bell which is in exact size.
Posts: 2,481
Threads: 1,434
Joined: Mar 2010
where from you got this pcb layout ?
is it from
http://studentbank.in/report-automatic-college-bell ?
what problem you are facing with this pcb layout
Posts: 5,362
Threads: 2,998
Joined: Feb 2011
[attachment=12508]
INTRODUCTION
This Project takes over the task of Ringing of the Bell in Colleges. It replaces the Manual Switching of the Bell in the College. It has an Inbuilt Real Time Clock (DS1307 /DS 12c887) which tracks over the Real Time. When this time equals to the Bell Ringing time, then the Relay for the Bell is switched on.
The Bell Ringing time can be edited at any Time, so that it can be used at Normal Class Timings as well as Exam Times. The Real Time Clock is displayed on LCDt display. The Microcontroller AT89S52 is used to control all the Functions, it get the time through the keypad and store it in its Memory. And when the Real time and Bell time get equal then the Bell is switched on for a predetermined time.
BLOCK DIAGRAM
A BRIEF INTRODUCTION TO 8051 MICROCONTROLLER:
When we have to learn about a new computer we have to familiarize about the machine capability we are using, and we can do it by studying the internal hardware design (devices architecture), and also to know about the size, number and the size of the registers.
A microcontroller is a single chip that contains the processor (the CPU), non-volatile memory for the program (ROM or flash), volatile memory for input and output (RAM), a clock and an I/O control unit. Also called a "computer on a chip," billions of microcontroller units (MCUs) are embedded each year in a myriad of products from toys to appliances to automobiles. For example, a single vehicle can use 70 or more microcontrollers. The following picture describes a general block diagram of microcontroller.
89s52: The AT89S52 is a low-power, high-performance CMOS 8-bit microcontroller with 8K bytes of in-system programmable Flash memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard 80C51 instruction set and pinout. The on-chip Flash allows the program memory to be reprogrammed in-system or by a conventional nonvolatile memory pro-grammer. By combining a versatile 8-bit CPU with in-system programmable Flash on a monolithic chip, the Atmel AT89S52 is a powerful microcontroller, which provides a highly flexible and cost-effective solution to many, embedded control applications. The AT89S52 provides the following standard features: 8K bytes of Flash, 256 bytes of RAM, 32 I/O lines, Watchdog timer, two data pointers, three 16-bit timer/counters, a six-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. In addition, the AT89S52 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port, and interrupt system to continue functioning. The Power-down mode saves the RAM con-tents but freezes the oscillator, disabling all other chip functions until the next interrupt
The hardware is driven by a set of program instructions, or software. Once familiar with hardware and software, the user can then apply the microcontroller to the problems easily.
The pin diagram of the 8051 shows all of the input/output pins unique to microcontrollers:
The following are some of the capabilities of 8051 microcontroller.
Internal ROM and RAM
I/O ports with programmable pins
Timers and counters
Serial data communication
The 8051 architecture consists of these specific features:
16 bit PC &data pointer (DPTR)
8 bit program status word (PSW)
8 bit stack pointer (SP)
Internal ROM 4k
Internal RAM of 128 bytes.
4 register banks, each containing 8 registers
80 bits of general purpose data memory
32 input/output pins arranged as four 8 bit ports: P0-P3
Two 16 bit timer/counters: T0-T1
Two external and three internal interrupt sources Oscillator and clock circuits.
Posts: 7,939
Threads: 421
Joined: Jun 2012
(04-04-2011, 10:56 AM)project topics Wrote: where from you got this pcb layout ?
is it from http://studentbank.in/report-automatic-college-bell ?
what problem you are facing with this pcb layout
Posts: 2
Threads: 1
Joined: Apr 2013
Automatic college bell project report, PCB layout of the college bell and PCB design of automatic college bell in pdf