I need the wiring diagram for Aquaguard Reviva water purifier

Eureka-Forbes Water Purification System has been designed to tackle most of
water pollution problems. System is made in Hungary, modular form to treat individual
pollutant problems (Sediments, Taste, Odor, Organic Chemicals and Salt), one by one in
different stages. Considering the importance of aesthetic value of fresh and smell free
water, purification (removal of taste and odor producing chemicals) is done in more than
one stage. For removing excessive amount of salt (brackishness) from water, best quality
reverse Osmosis Membrane TW30- 1812-50 has been incorporated in the system.
Your Reverse Osmosis System has been thoroughly tested and inspected for leaks,
product water quality, product water output and shut-off function, for at least 48 hours at
our factory. Therefore, the system may have some water in it. You may install the R.O.
System on either side of the cabinet panels underneath your kitchen sink.
Important Reminder
The Undersink Reverse Osmosis drinking water appliance is designed to connect
permanently to home plumbing system. The appliance should only be connected to
municipal water supply, under the following conditions;
Water Condition
Do not use the appliance where the water is microbiologically unsafe or the TDS level is
above 2,000 ppm. Use the unit with cold water only.
Water Temperature
Do not filter water with temperature higher than 38oC.
Water Pressure
Do install the appliance only on water lines with a pressure of 10 to 40 psi.
Installation Location
Do not place the appliance at a location with high humidity to prevent damages to theelectrical
components. Do not place the system under sun light or any light sources. Do not
spray water or liquid on the appliance.
Replacement of Filter Cartridge
Replace filter cartridge as recommended. The replacement of filter cartridge is essential
for the appliance to perform as intended.