applications of pneumatic vice and jack
#1

I have required application of pneumatic vice
I have reqired the Application of pneumatic vice. So I kindly requested to please send the reply
Reply
#2

applications of pneumatic vice and jack

Abstract:
Work holding and releasing is the most essential act to carry out machining. These are commonly used in the machine shop.
1. To hold the job in proper position
2. To release the job quickly
3. To hold the job rigidly
4. To prevent vibration of the job while the machining is carried out.
There are many types of work holding devices like machine vices swivel vices, universal vice, pipe vice, T-Bolt’s ‘U’ clamps, Goose neck clamp, angle plate, Jigs and fixtures etc. These are all mechanical type work holding devices. In this project we are dealing about the pneumatic plain vice used in drilling machine. Here the loading and unloading is quick. The job can be held more rigidly.

INTRODUCTION
There are three major types of work holding devices which are:
1. Mechanical type
2. Hydraulic type
3. Pneumatic type
In mechanical type, the screw rod is actuating the movable jaw. One end is connected to the movable jaw and it passes through a fixed type nut. When we rotate one end of the screw rod it will rotate in the nut and in turn moves the movable jaw. Here the rotary motion is converted into reciprocating motion.
In Hydraulic type’s one end of the piston rod is connected to the movable jaw and the piston slides in the cylinder. Here the hydraulic fluid actuates the movement of the piston; this in turn actuates the movable jaw. Here the principle movement is only a reciprocating movement. Pneumatic type is same as the hydraulic type. Here instead of hydraulic fluid, air is used.


ADVANTAGES:

1. Idle time of the machine is reduced.
2. When compared with the mechanical vices, it consumes less time for clamping and unclamping the job.
3. It reduces the manual labour
4. Hence, production rate is higher
5. In this mechanism there is no backlash.
DISADVANTAGES:

1. Initial higher cost.
2. May be a choice of air leakage
3. Cylinder stroke length is constant

APPLICATIONS:

1. To hold the job rigidly while machining.
2. For quick clamping and unclamping of the job.

SUGGESTION:

This is not only meant for drilling machine vice, using a large capacity cylinder and vice it can be used for clamping and unclamping of the job for most of the machining processes.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: applications of pneumatic vice and jack, project report on pneumatic jack, download automatic pneumatic vice and jack ppt, 12 automatic pneumatic vice and jack pdf, pneumatic jack project report, automatic pneumatic vice and jack pdf, pneumatic jack,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
Thumbs Up online catering management system on php with report and source code and ppt 4 8,720 29-04-2017, 10:59 AM
Last Post: jaseela123d
  lilitha nursing college 2016 applications in queenstown 1 954 09-03-2017, 10:23 AM
Last Post: jaseela123d
  lilitha college of nursing applications for 2017 1 706 28-07-2016, 03:53 PM
Last Post: jaseela123d
  pneumatic hand drilling ppt 2 730 21-07-2016, 03:27 PM
Last Post: jaseela123d
  if im doing commerce can i apply in lilitha college applications for 2016 1 776 21-07-2016, 11:30 AM
Last Post: jaseela123d
Sad lilitha nursing college applications for 2016 in june 1 712 19-07-2016, 02:52 PM
Last Post: visalakshik
  how to hack mtn network and free airtime and data 2 1,302 16-07-2016, 04:17 PM
Last Post: jaseela123d
  mobile embedded systems for home care applications ppt 1 755 08-07-2016, 09:32 AM
Last Post: visalakshik
  free download ebook on microcontrollers theory and applications by ajay v deshmukh 1 906 04-07-2016, 02:04 PM
Last Post: visalakshik
  microcontroller theory and applications by ajay deshmukh pdf 1 949 23-06-2016, 01:16 PM
Last Post: dhanabhagya

Forum Jump: