17-04-2017, 11:17 AM
Air pollution is more important from public health, as each person breathes approximately 22,000 times a day, inhaling about 15 to 22 kg of air daily. Contaminated air causes a bad physical effect that determines the undesirable aesthetic and physiological effects. Air pollution can be defined as the addition to our atmosphere of any material, which will have a dexterous effect on life on our planet. The main pollutants that cars bring are carbon monoxide (CO), unburned hydrocarbon (UBHC), nitrogen oxides (NOx) and lead.
In the aqua silencer there are 4 to 5 perforated plates installed. The perforated plate consists of different diameters. The purpose of providing holes of different diameter is to break the mass of gas to form smaller gas bubbles. The perforated plate of different diameter is shown in FIG. Usually 4 sets of holes are drilled in the perforated plate. After passing through the perforated plate passing through a layer of activated carbon is provided and a glass wool filter and felt is covered. The entire unit is then placed in a water vessel. A small aperture is provided at the end of the vessel to remove the exhaust gas and a drain plug is provided at the bottom of the vessel to periodically clean the vessel. A filling cap is also mounted on top of the container. At the inlet of the exhaust pipe is provided a non-return valve that also prevents the return of gases and water.
In the aqua silencer there are 4 to 5 perforated plates installed. The perforated plate consists of different diameters. The purpose of providing holes of different diameter is to break the mass of gas to form smaller gas bubbles. The perforated plate of different diameter is shown in FIG. Usually 4 sets of holes are drilled in the perforated plate. After passing through the perforated plate passing through a layer of activated carbon is provided and a glass wool filter and felt is covered. The entire unit is then placed in a water vessel. A small aperture is provided at the end of the vessel to remove the exhaust gas and a drain plug is provided at the bottom of the vessel to periodically clean the vessel. A filling cap is also mounted on top of the container. At the inlet of the exhaust pipe is provided a non-return valve that also prevents the return of gases and water.