abstract hydraulic bench vice pdf
#1

Hi am pravin i would like to get details on abstract hydraulic bench vice pdf
Reply
#2
Hydraulic bench is a very useful apparatus in hydraulics and fluid mechanics. It is involved in majority of experiments to be conducted e.g. To find the value of the co-efficient of velocity ‘Cv’, coefficient of discharge ‘Cd’, to study the characteristics of flow over notches, to find metacentric height, to find head losses through pipes, to verify Bernoulli’s theorem etc.

Parts of Hydraulic Bench Machine:
Its parts are given below:

Centrifugal pump
It draws water from sump tank and supplies it for performing experiments.

Sump Tank
It stores water for Hydraulic bench. It is located in the bottom portion of Hydraulic bench. Water from here is transported to other parts by using a pump. It has a capacity of 160 liters.

Vertical pipe
It supplies water to the upper part of hydraulic bench from sump tank through a pump.

Control valve
It is used to regulate the flow in the pipe i.e. to increase or decrease the inflow of water in the hydraulic bench.Parts of Hydraulic Bench

Connecter
With the help of this we can attach accessories with the hydraulic bench. Special purpose terminations may be connected to the pump supply by unscrewing connecter, no hand tools are required for doing so. It is located in the channel.

Channel
It is used in number of experiments It provides passage for water for different experiments.

Drain valve
It is used for emptying sump tank.

Side channels
They are the upper sides of the channel. They are used to attach accessories on test.

Volumetric tank
It stores water coming from channel. This tank is stepped to accommodate low or high flow rates. It has a capacity of 46 lits.

Stilling baffle
It decreases the turbulence of water coming from channel. It is located in the volumetric tank.

Scale & Tapping
A sight tube and scale is connected to a tapping in the base of the volumetric tank and gives an instantaneous indication of water level.

Dump valve
It is at the base of the volumetric tank. Opening the dump valve allows the entrained water to return to the sump tank for recycling. It is used for emptying volumetric tank. It is located in the bottom of the volumetric tank.

Actuator
Dump valve is operated by a remote actuator, lifting actuator opens the dump valve, when it is given a turn of 90’ it will turn the dump valve in the open position.

Over flow
It is an opening in the upper portion of the volumetric tank. It sends the water level above 46 lits to the sump tank.
Measuring cylinder

A measuring cylinder is provided for measuring of very small flow rate. The cylinder is stored in the compartment housing the pump.

Starter
It on / off the hydraulic bench.
Reply
#3
The set up is a self-contained, water recirculation unit provided with a top tray, sump tank and a measuring tank. Drain valve and over-flow are provided on the sump tank. A centrifugal pump is fitted tor water circulation. Flow control valve and bypass valve is fitted in water line to conduct the experiment at different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch. Measuring tank is provided to measure the discharge. Drain valve is provided in the measuring tank to empty water in sump tank after measuring discharge. Separate level indicator and scale is provided to read the level of water in the measuring tank.
RANGE OF EXPERIMENTS: Following experimenta can be carried out with common basic table with separate experimental setup (supplied at extra cost>, which can be connected to Hydraulic Bench with flexible pipe.
Bernoulli's Theorem Apparatus
Orifice and Mouth Piece Apparatus
Flow measurement by Venturimeter and Orificemeter
Losses due to Friction in Pipe Lines
Losses in Pipe fitting and Pipe Bends
Reynold's Number study
Flow over notches
Impact of Jet on Vanes Pi tot Static Tube

Salient Features
Top Tray : 1060 mm x 650 mm.
Pump : 1 HP
Flow Measurement : Using measuring Tank {Material SS}
Tank Capacity : 40 Ltr.
Sump Tank : Capacity 120 Ltr. Material SS.
The whole set-up is well designed and arranged in a good quality powder coating painted structure.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: abstruct for hydraulic city,
Popular Searches: hydraulic machine vice ppt, details of hydraulic vice in pdf, abstract hydraulic bench vice pdf, bench drilling machine, bench vice abstract download in pdf, pipe vice 2d diagram and explanation pdf, literature review of pneumatic bench vice,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  abstract on online cake shop 0 845 18-10-2018, 06:47 PM
Last Post: Guest
  abstract wedding hall booking system 1 645 05-10-2018, 08:13 PM
Last Post: Guest
  hydraulic jcb project report download 0 2,166 05-10-2018, 03:56 PM
Last Post: Guest
Rainbow design fabrication of hydraulic sheet bending machine wikipedia 3 1,168 15-08-2018, 06:10 PM
Last Post: Guest
  abstract smart dustbin 0 712 06-07-2018, 10:52 AM
Last Post: Guest
  investigatory project on hydraulic lift 1 859 28-06-2018, 08:30 AM
Last Post: Guest
  hydraulic jcb project pdf 0 680 20-06-2018, 06:19 PM
Last Post: Guest
  hydraulic bridge ppt download 0 577 07-05-2018, 08:34 AM
Last Post: Guest
  hydraulic syringe jcb ppt 0 380 26-04-2018, 02:21 PM
Last Post: Guest
  seminar abstract on new techniques of erosion control on hilly roads 0 622 19-04-2018, 07:14 AM
Last Post: Guest

Forum Jump: