hi i am sabari i would like to get details on 8086 microprocessor in traffic light control .now i am living at salem and now i am doing BE in computer science at dgct .so plz help me the above

Using Traffic Light Control System 8086 AIM: - To develop Traffic Light Control System using 8086APPARATUS: - Microprocessor Trainer Kit, Traffic Light Controller Kit, Power Supply, Data Cable Cathithieri: - Traffic Light controller interface module Is designed
Four way traffic light controllers are a combination of red, amber and green LED
Red combinations provided for halt, wait and go signals for vehicles
And green LEDs are provided for pedestrian crossings. 36 are arranged inside the LED
The form of an intersection is represented with a typical junction pcb with extensive legend printing.
In the left corner of each road, a group of five LEDs (red, amber and green 3)
To control the traffic of that road, it is arranged in the form of T-section. Each
The road name is North (N), South (S), East (E) and West (W). L1, L10, L9 of LED
And L28, L11, L20 and L29 (Amber) for the L8 (red) road, N, S, W, and the stop signal for the vehicles are indirectly indicating that N, S, W respectively And wait for the state of the vehicles for e. L3, L4 and L5 (Green) roads are for left, straight and right turn for vehicles similar to S. Similarly, L12-L13-L14, L23-L22-L21-L32-L-31-L 30, roads E, N, respectively W total 16
LEDs (2 red and 2 green on each road) are provided for pedestrian crossings. L7
The LL-8-L8, L15-L17, L24-L26 and L33-L35 (red) allow pedestrians to cross while waiting for pedestrians, when L- L9-L-18, L25-L27 and L-34-L36 (Green). Ha
Indicators of the radewater pedestrian LED (red and green are connected to both port lines (PC 4 to PC 7) with red inverted Red LED L10 &
The L28 port lines are connected to PC 2 and PC3 while L1 and L 9 lines are connected to PC 0 and PC 1. Take all others
D's (amber and green) are connected
Port A and Bevoorking: -8255 I / O mapped I / O has a difference of 8086 and all ports are output ports. The basic operation of the interface is explained with the help of an attached program. There is no entry for vehicles from the north in the attached program.
In the beginning of the program, all the red LEDs' switches are on, and all the other LED switches are off.
Before switching from Halt state to the state ahead.