6th sem advanced power electronics question paper
#1

Vtu advanced power electronics question papers/2014,2015/good
vtu advanced power electronics question papers download
Reply
#2

Advanced Power Electronics

Summary

DC to DC converters are important in portable electronic devices such as cellular phones and laptop computers, which are supplied with power from batteries primarily. Such electronic devices often contain several sub-circuits, each with its own voltage level requirement different from that supplied by the battery or an external supply (sometimes higher or lower than the supply voltage). Additionally, the battery voltage declines as its stored energy is drained. Switched DC to DC converters offer a method to increase voltage from a partially lowered battery voltage thereby saving space instead of using multiple batteries to accomplish the same thing.
Most DC to DC converters also regulate the output voltage. Some exceptions include high-efficiency LED power sources, which are a kind of DC to DC converter that regulates the current through the LEDs, and simple charge pumps which double or triple the output voltage.
DC to DC converters developed to maximize the energy harvest for photovoltaic systems and for wind turbines are called power optimizers.

Definitions

Hard switched - Transistors switch quickly while exposed to both full voltage and full current
Resonant – An LC circuit shapes the voltage across the transistor and current through it so that the transistor switches when either the voltage or the current is zero
Magnetic DC-to-DC converters may be operated in two modes, according to the current in its main magnetic component (inductor or transformer):

Continuous - The current fluctuates but never goes down to zero
Discontinuous - The current fluctuates during the cycle, going down to zero at or before the end of each cycle
Step-down- A converter where output voltage is lower than the input voltage (like a Buck converter).
Step-up- A converter that outputs a voltage higher than the input voltage (like a Boost converter).
Continuous Current Mode- Current and thus the magnetic field in the inductive energy storage never reach zero.
Discontinuous Current Mode- Current and thus the magnetic field in the inductive energy storage may reach or cross zero.
Noise- Since all properly designed DC-to-DC converters are completely inaudible, "noise" in discussing them always refers to unwanted electrical and electromagnetic signal noise.
RF noise- Switching converters inherently emit radio waves at the switching frequency and its harmonics. Switching converters that produce triangular switching current, such as the Split-Pi, forward converter, or Ćuk converter in continuous current mode, produce less harmonic noise than other switching converter. Linear converters produce practically no RF noise. Too much RF noise causes electromagnetic interference (EMI).
Input noise- If the converter loads the input with sharp load edges, electrical noise can be emitted from the supplying power lines as RF noise. This should be prevented with proper filtering in the input stage of the converter.
Output noise- The output of a DC-to-DC converter is designed to have a flat, constant output voltage. Unfortunately, all real DC-to-DC converters produce an output that constantly varies up and down from the nominal designed output voltage. This varying voltage on the output is the output noise. All DC-to-DC converters, including linear regulators, have some thermal output noise. Switching converters have, in addition, switching noise at the switching frequency and its harmonics. Some sensitive radio frequency and analog circuits require a power supply with so little noise that it can only be provided by a linear regulator. Many analog circuits require a power supply with relatively low noise, but can tolerate some of the less-noisy switching converters.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: tybscit 5 sem advanced java imp question or qustion bank, advanced electronics seminars, vturesults3rd sem electronics, cs9223 advanced system software 2013 question paper, advanced technology in electronics seminaropics, micro electronics 6th sem ec question papers, power electronics viva question,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  power plant instrumentation by krishnaswamy pdf free download 3 23,782 10-02-2019, 07:00 PM
Last Post:
Photo pdf download of tata steel apprentice exam previous year solved question papers 4 12,327 08-08-2018, 08:23 PM
Last Post: Guest
  how much does it cost for anna university paper chasing 5 2,679 01-08-2018, 09:44 PM
Last Post: Guest
  vtu planet 8th sem dss notes download 2 1,774 24-05-2018, 10:24 AM
Last Post: Guest
  viva question answer of flywheel experiment pdf 2 3,729 22-02-2018, 03:12 PM
Last Post: Guest
  jobs in kanti thermal power plant muzaffarpur 3 8,704 17-01-2018, 01:14 PM
Last Post: [email protected]
  aradhya tutorials compiler design notes 6th sem cse pdf 2 1,355 02-07-2017, 06:27 PM
Last Post: Guest
  today vidyarthi udyoga mitra news paper 2 1,876 06-05-2017, 01:31 AM
Last Post: Guest
  ieee paper on polyfuse pdf 4 1,778 16-04-2017, 02:50 PM
Last Post: Guest
  upcatet previous year question paper pdf 2 2,046 06-04-2017, 11:28 AM
Last Post: Guest

Forum Jump: